Institution
ConocoPhillips
Company•Houston, Texas, United States•
About: ConocoPhillips is a company organization based out in Houston, Texas, United States. It is known for research contribution in the topics: Catalysis & Casing. The organization has 3981 authors who have published 4606 publications receiving 81188 citations. The organization is also known as: Conoco Phillips.
Topics: Catalysis, Casing, Corrosion, Fracture (geology), Syngas
Papers published on a yearly basis
1 / 2
Papers
TL;DR: The most accurate results are obtained when native-state, cleaned, and restored-state cores are run with native crude oil and brine at reservoir temperature and pressure as discussed by the authors, and they provide cores that have the same wettability as the reservoir.
Abstract: Wettability is a major factor controlling the location, flow and distribution of fluids in a reservoir. The wettability of a core will affect almost all types of core analyses, including capillary pressure, relative permeability, waterflood behavior, electrical properties, and simulated tertiary recovery. The most accurate results are obtained when native- or restored-state cores are run with native crude oil and brine at reservoir temperature and pressure. Such conditions provide cores that have the same wettability as the reservoir. The wettability of originally water-wet reservoir rock can be altered by the adsorption of polar compounds and/or the deposition of organic material that was originally in the crude oil. The degree of alteration is determined by the interaction of the oil constituents, the mineral surface, and the brine chemistry. The procedures for obtaining native-state, cleaned, and restored-state cores are discussed, as well as the effects of coring, preservation, and experimental conditional conditions on wettability. Also reviewed are methods for artificially controlling the wettability during laboratory experiments.
1,164 citations
TL;DR: In this article, a methode permet de determiner si a carotte is a mouillabilite mixte, or not, is proposed, which permits to determine whether a mixture of carsets is a mixte.
Abstract: Article de synthese sur les limites et les avantages des methodes de mesure de la mouillabilite. Ces methodes sont quantitatives: methode Amott, methode du Bureau des Mines des Etats-Unis (USBM), methode de l'angle de contact ou qualitatives: imbibition, examen microscopique, flottation, ecoulement vitreux, courbes de permeabilite relative, courbes de pression capillaire, capillarimetrie, pression capillaire de deplacement, relations permeabilite/saturation et diagraphie de reservoir. Les methodes de RMN et d'adsorption de colorant destinees a mesurer la mouillabilite fractionnelle sont egalement discutees. Enfin l'auteur propose une methode qui permet de determiner si une carotte a une mouillabilite mixte
946 citations
TL;DR: In this article, the authors examined fast pyrolysis of corn stover to bio-oil with subsequent upgrading of the biooil to naphtha and diesel range fuels.
839 citations
TL;DR: In this paper, the most accurate relative permeability measurements are made on native-state core, where the reservoir wettability is perserved, such as cleaned core or core contaminated with drilling-mud surfactants.
Abstract: The wettability of a core will strongly affect its waterflood behavior and relative permeability. Wettability affects relative permeability because it is a major factor in the control of the location, flow, and distribution of fluids in a porous medium. In uniformly or fractionally wetted porous media, the water relative permeability increases and the oil relative permeability decreases as the system becomes more oil-wet. In a mixed-wettability system, the continuous oil-wet paths in the larger pores alter the relative permeability curves and allow the system to be waterflooded to a very low residual oil saturation (ROS) after the injection of many PV's of water. The most accurate relative permeability measurements are made on native-state core, where the reservoir wettability is perserved. Serious errors can result when measurements are made on cores with altered wettability, such as cleaned core or core contaminated with drilling-mud surfactants.
674 citations
TL;DR: In this paper, the authors compared several process technologies for the production of ethanol from lignocellulosic material, based on a 5- to 8-year time frame for implementation.
560 citations
Authors
Showing all 3984 results
| Name | H-index | Papers | Citations |
|---|---|---|---|
| Anthony G. Fane | 112 | 565 | 40904 |
| Feng Chen | 95 | 2138 | 53881 |
| Michael S. Triantafyllou | 61 | 382 | 16206 |
| Gerrit Voordouw | 58 | 232 | 10223 |
| Cory Berkland | 53 | 267 | 9863 |
| Richard A. Schultz | 49 | 158 | 6672 |
| Max P. McDaniel | 49 | 322 | 8897 |
| Christopher R. Clarkson | 48 | 265 | 10164 |
| Stefan Maus | 48 | 157 | 9193 |
| Tim K. Lowenstein | 45 | 107 | 6614 |
| Majeda Khraisheh | 44 | 186 | 8743 |
| Kurt J. Marfurt | 43 | 482 | 10815 |
| Ru-Shan Wu | 42 | 323 | 6976 |
| Burt E. Anderson | 39 | 106 | 6568 |
| David R. Corbin | 36 | 221 | 4310 |
Related Institutes (5)
Performance Metrics
| Year | Papers |
|---|---|
| 2025 | 7 |
| 2024 | 10 |
| 2023 | 20 |
| 2022 | 4 |
| 2021 | 50 |
| 2020 | 87 |