Single photons are a fundamental element of most quantum optical technologies. The ideal single-photon source is an on-demand, deterministic, single-photon source delivering light pulses in a well-defined polarization and spatiotemporal mode, and containing exactly one photon. In addition, for many applications, there is a quantum advantage if the single photons are indistinguishable in all their degrees of freedom. Single-photon sources based on parametric down-conversion are currently used, and while excellent in many ways, scaling to large quantum optical systems remains challenging. In 2000, semiconductor quantum dots were shown to emit single photons, opening a path towards integrated single-photon sources. Here, we review the progress achieved in the past few years, and discuss remaining challenges. The latest quantum dot-based single-photon sources are edging closer to the ideal single-photon source, and have opened new possibilities for quantum technologies.

High-performance semiconductor quantum-dot single-photon sources.

We describe the recent experimental progress in the control of spontaneous emission by manipulating optical modes with photonic crystals. It has been clearly demonstrated that the spontaneous emission from light emitters embedded in photonic crystals can be suppressed by the so-called photonic bandgap, whereas the emission efficiency in the direction where optical modes exist can be enhanced. Also, when an artificial defect is introduced into the photonic crystal, a photonic nanocavity is produced that can interact with light emitters. Cavity quality factors, or Q factors, of up to 2 million have been realized while maintaining very small mode volumes, and both spontaneous-emission modification (the Purcell effect) and strong-coupling phenomena have been demonstrated. The use of photonic crystals and nanocavities to manipulate spontaneous emission will contribute to the evolution of a variety of applications, including illumination, display, optical communication, solar energy and even quantum-information systems.

Spontaneous-emission control by photonic crystals and nanocavities

With a global market share of about 90%, crystalline silicon is by far the most important photovoltaic technology today. This article reviews the dynamic field of crystalline silicon photovoltaics from a device-engineering perspective. First, it discusses key factors responsible for the success of the classic dopant-diffused silicon homojunction solar cell. Next it analyzes two archetypal high-efficiency device architectures – the interdigitated back-contact silicon cell and the silicon heterojunction cell – both of which have demonstrated power conversion efficiencies greater than 25%. Last, it gives an up-to-date summary of promising recent pathways for further efficiency improvements and cost reduction employing novel carrier-selective passivating contact schemes, as well as tandem multi-junction architectures, in particular those that combine silicon absorbers with organic–inorganic perovskite materials.

/pdf/high-efficiency-crystalline-silicon-solar-cells-status-and-47y1w8zg6w.pdf

High-efficiency crystalline silicon solar cells: status and perspectives

Reliable, efficient electrically pumped silicon-based lasers would enable full integration of photonic and electronic circuits, but have previously only been realized by wafer bonding. Here, we demonstrate continuous-wave InAs/GaAs quantum dot lasers directly grown on silicon substrates with a low threshold current density of 62.5 A cm–2, a room-temperature output power exceeding 105 mW and operation up to 120 °C. Over 3,100 h of continuous-wave operating data have been collected, giving an extrapolated mean time to failure of over 100,158 h. The realization of high-performance quantum dot lasers on silicon is due to the achievement of a low density of threading dislocations on the order of 105 cm−2 in the III–V epilayers by combining a nucleation layer and dislocation filter layers with in situ thermal annealing. These results are a major advance towards reliable and cost-effective silicon-based photonic–electronic integration.

/pdf/electrically-pumped-continuous-wave-iii-v-quantum-dot-lasers-rmg1qnqnyt.pdf

Electrically pumped continuous-wave III–V quantum dot lasers on silicon

Optics offers unique opportunities for reducing energy in information processing and communications while simultaneously resolving the problem of interconnect bandwidth density inside machines. Such energy dissipation overall is now at environmentally significant levels; the source of that dissipation is progressively shifting from logic operations to interconnect energies. Without the prospect of substantial reduction in energy per bit communicated, we cannot continue the exponential growth of our use of information. The physics of optics and optoelectronics fundamentally addresses both interconnect energy and bandwidth density, and optics may be the only scalable solution to such problems. Here we summarize the corresponding background, status, opportunities, and research directions for optoelectronic technology and novel optics, including subfemtojoule devices in waveguide and novel two-dimensional (2-D) array optical systems. We compare different approaches to low-energy optoelectronic output devices and their scaling, including lasers, modulators and LEDs, optical confinement approaches (such as resonators) to enhance effects, and the benefits of different material choices, including 2-D materials and other quantum-confined structures. With such optoelectronic energy reductions, and the elimination of line charging dissipation by the use optical connections, the next major interconnect dissipations are in the electronic circuits for receiver amplifiers, timing recovery, and multiplexing. We show we can address these through the integration of photodetectors to reduce or eliminate receiver circuit energies, free-space optics to eliminate the need for timing and multiplexing circuits (while also solving bandwidth density problems), and using optics generally to save power by running large synchronous systems. One target concept is interconnects from ∼1 cm to ∼10 m that have the same energy (∼10 fJ/bit) and simplicity as local electrical wires on chip.

Attojoule Optoelectronics for Low-Energy Information Processing and Communications

Topological photonics has emerged as a novel approach to engineering the flow of light and provides unprecedented means for developing diverse photonic elements, including robust optical waveguides immune to structural imperfections. However, the development of nanoscale standing-wave cavities in topological photonics is rather slow, despite its importance when building densely integrated photonic integrated circuits. In this Letter, we report a photonic crystal nanocavity based on a topological corner state, supported at a 90-deg-angled rim of a two-dimensional photonic crystal. A combination of the bulk-edge and edge-corner correspondences guarantees the presence of the higher-order topological state in a hierarchical manner. We experimentally observe a corner mode that is tightly localized in space while supporting a high Q factor over 2,000, verifying its promise as a nanocavity. These results cast new light on the way to introduce nanocavities in topological photonics platforms.

Photonic crystal nanocavity based on a topological corner state

We propose a modified droplet epitaxy method for fabricating self-organized GaAs/AlGaAs quantum dots (QDs) with a high As flux irradiation and a low substrate temperature. By our novel method, GaAs QDs were successfully formed, retaining their pyramidal shape, original base size and density of droplets, and preventing layer-by-layer growth. Quantum size effects of the QDs were distinctly observed by photoluminescence measurements. It was confirmed that this new modified droplet epitaxy method is promising for fabricating a high-quality GaAs/AlGaAs QD system.

https://iopscience.iop.org/article/10.1143/JJAP.39.L79/pdf

Fabrication of GaAs Quantum Dots by Modified Droplet Epitaxy

Topological edge states exist at the interfaces between two topologically distinct materials. The presence and number of such modes are deterministically predicted from the bulk band topologies, known as the bulk-edge correspondence. This principle is highly useful for predictably controlling optical modes in resonators made of photonic crystals (PhCs), leading to the recent demonstrations of microscale topological lasers. Meanwhile, zero-dimensional topological trapped states in the nanoscale remained unexplored, despite its importance for enhancing light–matter interactions and for wide applications including single-mode nanolasers. Here, we report a topological PhC nanocavity with a near-diffraction-limited mode volume and its application to single-mode lasing. The topological origin of the nanocavity, formed at the interface between two topologically distinct PhCs, guarantees the existence of only one mode within its photonic bandgap. The observed lasing accompanies a high spontaneous emission coupling factor stemming from the nanoscale confinement. These results encompass a way to greatly downscale topological photonics. For most lasing and photonic applications, it is essential to control the number of lasing modes that are present. In this work, an interface between two topologically distinct photonic crystals is used to ensure single-mode lasing with enhanced light-matter interactions due to a near-diffraction-limited mode volume.

/pdf/topological-photonic-crystal-nanocavity-laser-1l8d6mep54.pdf

Topological photonic crystal nanocavity laser

Directly grown III-V quantum dot (QD) laser on on-axis Si (001) is a good candidate for achieving monolithically integrated Si photonics light source. Nowadays, laser structures containing high quality InAs / GaAs QD are generally grown by molecular beam epitaxy (MBE). However, the buffer layer between the on-axis Si (001) substrate and the laser structure are usually grown by metal-organic chemical vapor deposition (MOCVD). In this paper, we demonstrate all MBE grown high-quality InAs/GaAs QD lasers on on-axis Si (001) substrates without using patterning and intermediate layers of foreign material.

All MBE grown InAs/GaAs quantum dot lasers on on-axis Si (001)

Topological phonics has emerged as a novel approach to engineer the flow of light and provides unprecedented means for developing diverse photonic elements, including robust optical waveguides immune to structural imperfections. However, the development of nanoscale standing-wave cavities in topological photonics is rather slow, despite its importance when building densely-integrated photonic integrated circuits. In this Letter, we report a photonic crystal nanocavity based on a topological corner state, supported at a 90-degrees-angled rim of a two dimensional photonic crystal. A combination of the bulk-edge and edge-corner correspondences guarantees the presence of the higher-order topological state in a hierarchical manner. We experimentally observed a corner mode that is tightly localized in space while supporting a high Q factor over 2,000, verifying its promise as a nanocavity. These results cast new light on the way to introduce nanocavities in topological photonics platforms.

Popular Tasks used by Researchers

How can I help with your research?

Get more enhanced response by uploading the PDFs you want me to reference.

No relevant PDFs in your library

SciSpace is the AI research assistant for academics. Run systematic literature reviews on 280M+ papers, and write papers with cited sources. Trusted by 1M+ students, PhDs & researchers.

SciSpace | AI for Research

We encountered an error while loading the panel. Please try refreshing the page.

Something went wrong

Analyze PDFs

Code & Manuscripts

Funding & Grants

Literature & Patents

Medical & Clinical Data

Systematic Review

Visualize & Present

Web & Data

Build a Google Scholar-like website for your research.

Build a website

Create charts and images for your research

Create a Chart

Write a paper for submission to a journal

Draft a manuscript

Patent Search

Design eye-catching scientific posters in minutes.

Scientific Poster Generation

Systematic Literature Review

Anyone with the link can view this chat. You can switch it back to private anytime.

One task is running at the moment. Your messages will be shown right after.

Drag and drop or click here to browse

Loved by <highlight>1 million+</highlight> researchers

Extract a list of specific topics and their sources from unstructured text

Topics

Compare and analyze relevant papers that matches with your search

Papers

Get insights from PDFs and bookmarked papers from your library

My library

Recent searches

Try searching for:

Catch AI-generated content in scholarly and non-scholarly content

{ai} Detector

Ai Writer

Get PDF Summaries, highlighted text explanations 

Chat with PDF

Effortlessly create in-text citations and bibliographies in APA and 2,500 other formats

Citation generator

Get explanations, summaries, and answers on academic papers

Ease up your research workflow with {scispace}'s cohort of exciting AI tools

Elevate your academic writing skills and convey your ideas the way you want

Paraphraser

Explore our range of reading and writing tools

Your file is being prepared and should be ready in a few minutes. If it's a large file, it might take a bit longer. You can close this window, and we'll email you the file when it's done.

You have reached a maximum limit of <strong>{limit}</strong> columns in the table. Remove at least <strong>1</strong> column to add or create another one.

Katsuyuki Watanabe

Author Tools

Chat about Author

Papers

Photonic crystal nanocavity based on a topological corner state

Fabrication of GaAs Quantum Dots by Modified Droplet Epitaxy

Topological photonic crystal nanocavity laser

All MBE grown InAs/GaAs quantum dot lasers on on-axis Si (001)

Photonic crystal nanocavity based on a topological corner state