A fully integrated switched-capacitor power amplifier (SCPA) utilizes switched-capacitor techniques in an EER/Polar architecture. It operates on the envelope of a nonconstant envelope modulated signal as an RF-DAC in order to amplify the signal efficiently. The measured maximum output power and PAE are 25.2 dBm and 45%, respectively. When amplifying an 802.11g 64-QAM orthogonal frequency-division multiplexing (OFDM) signal, the measured error vector magnitude is 2.6% and the average output power and power-added efficiencies are 17.7 dBm and 27%, respectively.

A Switched-Capacitor RF Power Amplifier

This expanded and thoroughly revised edition of Thomas H. Lee's acclaimed guide to the design of gigahertz RF integrated circuits features a completely new chapter on the principles of wireless systems. The chapters on low-noise amplifiers, oscillators and phase noise have been significantly expanded as well. The chapter on architectures now contains several examples of complete chip designs that bring together all the various theoretical and practical elements involved in producing a prototype chip. First Edition Hb (1998): 0-521-63061-4 First Edition Pb (1998); 0-521-63922-0

The Design of CMOS Radio-Frequency Integrated Circuits: RF CIRCUITS THROUGH THE AGES

A digitally modulated power amplifier (DPA) in 1.2 V 0.13 mum SOI CMOS is presented, to be used as a building block in multi-standard, multi-band polar transmitters. It performs direct amplitude modulation of an input RF carrier by digitally controlling an array of 127 unary-weighted and three binary-weighted elementary gain cells. The DPA is based on a novel two-stage topology, which allows seamless operation from 800 MHz through 2 GHz, with a full-power efficiency larger than 40% and a 25.2 dBm maximum envelope power. Adaptive digital predistortion is exploited for DPA linearization. The circuit is thus able to reconstruct 21.7 dBm WCDMA/EDGE signals at 1.9 GHz with 38% efficiency and a higher than 10 dB margin on all spectral specifications. As a result of the digital modulation technique, a higher than 20.1 % efficiency is guaranteed for WCDMA signals with a peak-to-average power ratio as high as 10.8 dB. Furthermore, a 15.3 dBm, 5 MHz WiMAX OFDM signal is successfully reconstructed with a 22% efficiency and 1.53% rms EVM. A high 10-bit nominal resolution enables a wide-range TX power control strategy to be implemented, which greatly minimizes the quiescent consumption down to 10 mW. A 16.4% CDMA average efficiency is thus obtained across a > 70 dB power control range, while complying with all the spectral specifications.

A 25 dBm Digitally Modulated CMOS Power Amplifier for WCDMA/EDGE/OFDM With Adaptive Digital Predistortion and Efficient Power Control

A 65-nm digitally modulated polar transmitter incorporates a fully integrated, efficient 2.4-GHz switching Inverse Class-D power amplifier. Low-power digital filtering on the amplitude path helps remove spectral images for coexistence. The transmitter integrates the complete LO distribution network and digital drivers. Operating from a 1-V supply, the PA has 21.8-dBm peak output power with 44% efficiency. Simple static predistortion helps the transmitter meet EVM and mask requirements of 802.11g 54-Mb/s WLAN data with 18% average efficiency.

An Efficient Mixed-Signal 2.4-GHz Polar Power Amplifier in 65-nm CMOS Technology

A switched-capacitor power amplifier (SCPA) that realizes an envelope elimination and restoration/polar class-G topology is introduced. A novel voltage-tolerant switch enables the use of two power supply voltages which increases efficiency and output power simultaneously. Envelope digital-to-analog conversion in the polar transmitter is achieved using an SC RF DAC that exhibits high efficiency at typical output power backoff levels. In addition, high linearity is achieved and no digital predistortion is required. Implemented in 65 nm CMOS, the measured peak output power and power-added efficiency (PAE) are 24.3 dBm and 43.5%, respectively, whereas when amplifying 802.11g 64-QAM OFDM signals, the average output power and PAE are 16.8 dBm and 33%, respectively. The measured EVM is 2.9%.

A Class-G Switched-Capacitor RF Power Amplifier

This paper presents a CMOS RF power amplifier that employs a digital polar architecture to improve the overall power efficiency when amplifying signals with high linearity requirements. The power amplifier comprises 64 parallel RF amplifiers that are driven by a constant envelope RF phase-modulated signal. The unit amplifiers are digitally activated by a 6-bit envelope code to construct a non-constant envelope RF output, thereby performing a digital-to-RF conversion. In order to suppress the spectral images resulting from the discrete-time to continuous-time conversion of the envelope, the use of oversampling and four-fold linear interpolation is explored. An experimental prototype of the polar amplifier has been integrated in a 0.18- mum CMOS technology, occupies a total die area of 1.8 mm2 , operates at a 1.6-GHz carrier frequency with a channel bandwidth of 20 MHz. For an OFDM signal, it achieves a power-added efficiency of 6.7% with an EVM of - 26.8 dB while delivering 13.6 dBm of linear output power and drawing 145 mA from a 1.7-V supply.

A Digitally Modulated Polar CMOS Power Amplifier With a 20-MHz Channel Bandwidth

Popular Tasks used by Researchers

How can I help with your research?

Get more enhanced response by uploading the PDFs you want me to reference.

No relevant PDFs in your library

SciSpace is the AI research assistant for academics. Run systematic literature reviews on 280M+ papers, and write papers with cited sources. Trusted by 1M+ students, PhDs & researchers.

SciSpace | AI for Research

We encountered an error while loading the panel. Please try refreshing the page.

Something went wrong

Analyze PDFs

Code & Manuscripts

Funding & Grants

Literature & Patents

Medical & Clinical Data

Systematic Review

Visualize & Present

Web & Data

Build a Google Scholar-like website for your research.

Build a website

Create charts and images for your research

Create a Chart

Write a paper for submission to a journal

Draft a manuscript

Patent Search

Design eye-catching scientific posters in minutes.

Scientific Poster Generation

Systematic Literature Review

Anyone with the link can view this chat. You can switch it back to private anytime.

One task is running at the moment. Your messages will be shown right after.

Drag and drop or click here to browse

Loved by <highlight>1 million+</highlight> researchers

Extract a list of specific topics and their sources from unstructured text

Topics

Compare and analyze relevant papers that matches with your search

Papers

Get insights from PDFs and bookmarked papers from your library

My library

Recent searches

Try searching for:

Catch AI-generated content in scholarly and non-scholarly content

{ai} Detector

Ai Writer

Get PDF Summaries, highlighted text explanations 

Chat with PDF

Effortlessly create in-text citations and bibliographies in APA and 2,500 other formats

Citation generator

Get explanations, summaries, and answers on academic papers

Ease up your research workflow with {scispace}'s cohort of exciting AI tools

Elevate your academic writing skills and convey your ideas the way you want

Paraphraser

Explore our range of reading and writing tools

Your file is being prepared and should be ready in a few minutes. If it's a large file, it might take a bit longer. You can close this window, and we'll email you the file when it's done.

You have reached a maximum limit of <strong>{limit}</strong> columns in the table. Remove at least <strong>1</strong> column to add or create another one.

A. Kavousian

Author Tools

Chat about Author

Papers

A Digitally Modulated Polar CMOS Power Amplifier With a 20-MHz Channel Bandwidth