Wireless Application Protocol

Abstract: This paper proposes S-MAC, a medium-access control (MAC) protocol designed for wireless sensor networks Wireless sensor networks use battery-operated computing and sensing devices A network of these devices will collaborate for a common application such as environmental monitoring We expect sensor networks to be deployed in an ad hoc fashion, with individual nodes remaining largely inactive for long periods of time, but then becoming suddenly active when something is detected These characteristics of sensor networks and applications motivate a MAC that is different from traditional wireless MACs such as IEEE 80211 in almost every way: energy conservation and self-configuration are primary goals, while per-node fairness and latency are less important S-MAC uses three novel techniques to reduce energy consumption and support self-configuration To reduce energy consumption in listening to an idle channel, nodes periodically sleep Neighboring nodes form virtual clusters to auto-synchronize on sleep schedules Inspired by PAMAS, S-MAC also sets the radio to sleep during transmissions of other nodes Unlike PAMAS, it only uses in-channel signaling Finally, S-MAC applies message passing to reduce contention latency for sensor-network applications that require store-and-forward processing as data move through the network We evaluate our implementation of S-MAC over a sample sensor node, the Mote, developed at University of California, Berkeley The experiment results show that, on a source node, an 80211-like MAC consumes 2-6 times more energy than S-MAC for traffic load with messages sent every 1-10 s

Abstract: Energy-aware design and evaluation of network protocols requires knowledge of the energy consumption behavior of actual wireless interfaces. But little practical information is available about the energy consumption behavior of well-known wireless network interfaces and device specifications do not provide information in a form that is helpful to protocol developers. This paper describes a series of experiments which obtained detailed measurements of the energy consumption of an IEEE 802.11 wireless network interface operating in an ad hoc networking environment. The data is presented as a collection of linear equations for calculating the energy consumed in sending, receiving and discarding broadcast and point-to-point data packets of various sizes. Some implications for protocol design and evaluation in ad hoc networks are discussed.

Abstract: A number of library based parallel and sequential network simulators have been designed. The paper describes a library, called GloMoSim (Global Mobile system Simulator), for parallel simulation of wireless networks. GloMoSim has been designed to be extensible and composable: the communication protocol stack for wireless networks is divided into a set of layers, each with its own API. Models of protocols at one layer interact with those at a lower (or higher) layer only via these APIs. The modular implementation enables consistent comparison of multiple protocols at a given layer. The parallel implementation of GloMoSim can be executed using a variety of conservative synchronization protocols, which include the null message and conditional event algorithms. The paper describes the GloMoSim library, addresses a number of issues relevant to its parallelization, and presents a set of experimental results on the IBM 9076 SP, a distributed memory multicomputer. These experiments use models constructed from the library modules.

Abstract: In wireless LANs (WLANs), the medium access control (MAC) protocol is the main element that determines the efficiency in sharing the limited communication bandwidth of the wireless channel. In this paper we focus on the efficiency of the IEEE 802.11 standard for WLANs. Specifically, we analytically derive the average size of the contention window that maximizes the throughput, hereafter theoretical throughput limit, and we show that: 1) depending on the network configuration, the standard can operate very far from the theoretical throughput limit; and 2) an appropriate tuning of the backoff algorithm can drive the IEEE 802.11 protocol close to the theoretical throughput limit. Hence we propose a distributed algorithm that enables each station to tune its backoff algorithm at run-time. The performances of the IEEE 802.11 protocol, enhanced with our algorithm, are extensively investigated by simulation. Specifically, we investigate the sensitiveness of our algorithm to some network configuration parameters (number of active stations, presence of hidden terminals). Our results indicate that the capacity of the enhanced protocol is very close to the theoretical upper bound in all the configurations analyzed.