TL;DR: In this paper, an air flow rate sensor and throttle valve are provided in a control duct between a supply chamber utilizing double ceilings and the air diffusers in the supply chamber, which can be equalized or can be set to the desired values.
Abstract: An air flow rate sensor and throttle valve which controls the opening of a duct in accordance with the detection signals from the air flow rate sensor are provided in a control duct between a supply chamber utilizing double ceilings and the air diffusers in the supply chamber. The quantities of air fed from the respective air diffusers can be equalized or can be set to the desired values. In this case, since the air blowing can be automatically controlled for each diffuser, it is not necessary to individually adjust the quantities of air for the respective air diffusers after the installation of the air conditioner, thereby eliminating the adjusting works of the air diffusers.
TL;DR: In this paper, a method for comprehensive integrated control of an internal combustion engine, such as a compression-ignition engine, utilizing an electronic control module utilizing an ECC module is presented.
Abstract: A method for comprehensive integrated control of
an internal combustion engine, such as a compression-ignition
engine, utilizing an electronic control module
(20) is disclosed. The control strategy integrates
various functions of engine control including an
acceleration balance test for the engine cylinders, a
fuel economy vehicle speed limit adder, a fuelling limit
for high altitude vehicle operation, throttle logic, a
data-hub for operation trending and vehicle component
lifting analyses, a gear ratio torque limit, an air
temperature based torque limit, enhanced cooling fan
control, and a idle shutdown strategy based on ambient
air temperature.
TL;DR: In this paper, a handheld surgical device includes a multi-position throttle, rotatably attached to the body of the device, to allow for ambidextrous positioning of a motor speed control lever.
Abstract: A handheld surgical device includes a multi-position throttle, rotatably attached to the body of the device, to allow for ambidextrous positioning of a motor speed control lever. The motor speed control lever may interact with a speed control sensor in the body of the device capable of detecting the actuation level of the motor speed control lever in any one of two or more positions.
TL;DR: In this paper, an adjustable throttle device is provided upstream from the compressor wheel, for regulating the air mass stream to be supplied by an exhaust gas turbocharger for an internal combustion engine.
Abstract: An exhaust gas turbocharger for an internal combustion engine has an exhaust gas turbine in the exhaust gas train and a compressor in the intake tract, whereby an adjustable throttle device is provided upstream from the compressor wheel, for regulating the air mass stream to be supplied. The throttle device comprises a first guide grid and a second guide grid in the inflow region to the compressor wheel. Each guide grid possesses an adjustable grid geometry.
TL;DR: In this article, an analytical model for the simulation, analysis and control of shift dynamics for dual-clutch transmission vehicles is presented, and the model has been used to study the variation in output torque in response to different clutch pressure profiles during shifts.