Tar

Abstract: Tar formation is one of the major problems to deal with during biomass gasification. Tar condenses at reduced temperature, thus blocking and fouling process equipments such as engines and turbines. Considerable efforts have been directed on tar removal from fuel gas. Tar removal technologies can broadly be divided into two approaches; hot gas cleaning after the gasifier (secondary methods), and treatments inside the gasifier (primary methods). Although secondary methods are proven to be effective, treatments inside the gasifier are gaining much attention as these may eliminate the need for downstream cleanup. In primary treatment, the gasifier is optimized to produce a fuel gas with minimum tar concentration. The different approaches of primary treatment are (a) proper selection of operating parameters, (b) use of bed additive/catalyst, and (c) gasifier modifications. The operating parameters such as temperature, gasifying agent, equivalence ratio, residence time, etc. play an important role in formation and decomposition of tar. There is a potential of using some active bed additives such as dolomite, olivine, char, etc. inside the gasifier. Ni-based catalyst are reported to be very effective not only for tar reduction, but also for decreasing the amount of nitrogenous compounds such as ammonia. Also, reactor modification can improve the quality of the product gas. The concepts of two-stage gasification and secondary air injection in the gasifier are of prime importance. Some aspects of primary methods and the research and development in this area are reviewed and cited in the present paper.

Abstract: The main purpose of this review is to update the information on gasification tar, the most cumbersome and problematic parameter in any gasification commercialization effort. The work aims to present to the community the scientific and practical aspects of tar formation and conversion (removal) during gasification as a function of the various technological and technical parameters and variables.

Abstract: Biomass is an important primary energy source as well as renewable energy source. As the most promising biomass utilization method, gasification/pyrolysis produces not only useful fuel gases, char and chemicals, but also some byproducts like fly ash, NOx, SO2 and tar. Tar in the product gases will condense at low temperature, and lead to clogged or blockage in fuel lines, filters and engines. Moreover, too much tar in product gases will reduce the utilization efficiency of biomass. Therefore, the reduction or decomposition of tar in biomass derived fuel gases is one of the biggest obstacles in its utilization for power generation. In this paper, we review the literatures pertaining to tar reduction or destruction methods during biomass gasification/pyrolysis. On the basis of their characteristics, the current tar reduction or destruction methods can be broadly divided into five main groups: mechanism methods, self-modification, thermal cracking, catalyst cracking and plasma methods.

Abstract: Biomass gasification presents highly interesting possibilities for expanding the utilization of biomass as power generation using internal combustion engines or turbines. However, the need to reduce the tar in the producer gas is very important. The successful application of producer gas depends not only on the quantity of tar, but also on its properties and compositions, which is associated with the dew-point of tar components. Class 5, 4, and 2 tar become a major cause of condensation which can foul the engines and turbines. Hence, the selectivity of tar treatment method to remove or convert class 5, 4, and 2 tar is a challenge in producer gas utilization. This review was conducted to present the recent studies in tar treatment from biomass gasification. The new technologies with their strengths and the weaknesses in term of tar reduction are discussed.