Space-based radar

Abstract: Interferometric synthetic aperture radar observations provide a means for obtaining high-resolution digital topographic maps from measurements of amplitude and phase of two complex radar images. The phase of the radar echoes may only be measured modulo 2 pi; however, the whole phase at each point in the image is needed to obtain elevations. An approach to 'unwrapping' the 2 pi ambiguities in the two-dimensional data set is presented. It is found that noise and geometrical radar layover corrupt measurements locally, and these local errors can propagate to form global phase errors that affect the entire image. It is shown that the local errors, or residues, can be readily identified and avoided in the global phase estimation. A rectified digital topographic map derived from the unwrapped phase values is presented.

Abstract: Synthetic Aperture Radar (SAR) has been widely used for Earth remote sensing for more than 30 years. It provides high-resolution, day-and-night and weather-independent images for a multitude of applications ranging from geoscience and climate change research, environmental and Earth system monitoring, 2-D and 3-D mapping, change detection, 4-D mapping (space and time), security-related applications up to planetary exploration. With the advances in radar technology and geo/bio-physical parameter inversion modeling in the 90s, using data from several airborne and spaceborne systems, a paradigm shift occurred from the development driven by the technology push to the user demand pull. Today, more than 15 spaceborne SAR systems are being operated for innumerous applications. This paper provides first a tutorial about the SAR principles and theory, followed by an overview of established techniques like polarimetry, interferometry and differential interferometry as well as of emerging techniques (e.g., polarimetric SAR interferometry, tomography and holographic tomography). Several application examples including the associated parameter inversion modeling are provided for each case. The paper also describes innovative technologies and concepts like digital beamforming, Multiple-Input Multiple-Output (MIMO) and bi- and multi-static configurations which are suitable means to fulfill the increasing user requirements. The paper concludes with a vision for SAR remote sensing.

Abstract: Preface. Summary. Nomenclature. 1. Introduction. 2. Radar system theory and interferometric processing. 3. Functional model for radar interferometry. 4. Stochastic model for radar interferometry. 5. Data analysis and interpretation for deformation monitoring. 6. Atmospheric monitoring. 7. Conclusions and recommendations. A. Comparison neutral delay GPS and InSAR. B. Structure function and power spectrum. Bibliography. About the Author. Index.

Abstract: For 11 days in February 2000, the Shuttle Radar Topography Mission (SRTM) successfully recorded by interferometric synthetic aperture radar (InSAR) data of the entire land mass of the earth between 60°N and 57°S. The data acquired in C- and X-bands are processed into the first global digital elevation models (DEMs) at 1 arc sec resolution, by NASA-JPL and German aerospace center (DLR), respectively. From the perspective of the SRTM-X system, we give in this paper an overview of the mission and the DEM production, as well as an evaluation of the DEM product quality. Special emphasis is on challenges and peculiarities of the processing that arose from the unique design of the SRTM system, which has been the first single-pass interferometer in space.