About: Resource Reservation Protocol is a research topic. Over the lifetime, 2346 publications have been published within this topic receiving 73205 citations. The topic is also known as: RSVP.
TL;DR: RTP provides end-to-end network transport functions suitable for applications transmitting real-time data over multicast or unicast network services and is augmented by a control protocol (RTCP) to allow monitoring of the data delivery in a manner scalable to large multicast networks.
Abstract: This memorandum describes RTP, the real-time transport protocol. RTP provides end-to-end network transport functions suitable for applications transmitting real-time data, such as audio, video or simulation data, over multicast or unicast network services. RTP does not address resource reservation and does not guarantee quality-of-service for real-time services. The data transport is augmented by a control protocol (RTCP) to allow monitoring of the data delivery in a manner scalable to large multicast networks, and to provide minimal control and identification functionality. RTP and RTCP are designed to be independent of the underlying transport and network layers. The protocol supports the use of RTP-level translators and mixers.
TL;DR: RSVP as discussed by the authors is a resource reservation setup protocol designed for an integrated services Internet that provides receiver-initiated setup of resource reservations for multicast or unicast data flows, with good scaling and robustness properties.
Abstract: This memo describes version 1 of RSVP, a resource reservation setup protocol designed for an integrated services Internet. RSVP provides receiver-initiated setup of resource reservations for multicast or unicast data flows, with good scaling and robustness properties.
TL;DR: This document specifies Version 1.0 of the Transport Layer Security (TLS) protocol, which provides communications privacy over the Internet by allowing client/server applications to communicate in a way that is designed to prevent eavesdropping, tampering, or message forgery.
Abstract: This document specifies Version 1.0 of the Transport Layer Security (TLS) protocol. The TLS protocol provides communications privacy over the Internet. The protocol allows client/server applications to communicate in a way that is designed to prevent eavesdropping, tampering, or message forgery.
TL;DR: In this paper, the authors specify version 6 of the Internet Protocol (IPv6), also referred to as IP Next Generation or IPng, and propose a new protocol called IPng.
Abstract: This document specifies version 6 of the Internet Protocol (IPv6), also sometimes referred to as IP Next Generation or IPng.
TL;DR: In this paper, the use of RSVP (Resource Reservation Protocol) to establish label-switched paths (LSPs) in MPLS (Multi-Protocol Label Switching) is described.
Abstract: This document describes the use of RSVP (Resource Reservation Protocol), including all the necessary extensions, to establish label-switched paths (LSPs) in MPLS (Multi-Protocol Label Switching) Since the flow along an LSP is completely identified by the label applied at the ingress node of the path, these paths may be treated as tunnels A key application of LSP tunnels is traffic engineering with MPLS as specified in RFC 2702