Refractometer

Abstract: This paper reviews the extended Cauchy model and the four-parameter model for describing the wavelength and temperature effects of liquid crystal (LC) refractive indices. The refractive indices of nine commercial LCs, MLC-9200-000, MLC-9200-100, MLC-6608, MLC-6241-000, 5PCH, 5CB, TL-216, E7, and E44 are measured by the Multi-wavelength Abbe Refractometer. These experimental data are used to validate the theoretical models. Excellent agreement between experiment and theory is obtained.

Abstract: Silicon and germanium are perhaps the two most well-understood semiconductor materials in the context of solid state device technologies and more recently micromachining and nanotechnology. Meanwhile, these two materials are also important in the field of infrared lens design. Optical instruments designed for the wavelength range where these two materials are transmissive achieve best performance when cooled to cryogenic temperatures to enhance signal from the scene over instrument background radiation. In order to enable high quality lens designs using silicon and germanium at cryogenic temperatures, we have measured the absolute refractive index of multiple prisms of these two materials using the Cryogenic, High-Accuracy Refraction Measuring System (CHARMS) at NASA's Goddard Space Flight Center, as a function of both wavelength and temperature. For silicon, we report absolute refractive index and thermo-optic coefficient (dn/dT) at temperatures ranging from 20 to 300 K at wavelengths from 1.1 to 5.6 pin, while for germanium, we cover temperatures ranging from 20 to 300 K and wavelengths from 1.9 to 5.5 microns. We compare our measurements with others in the literature and provide temperature-dependent Sellmeier coefficients based on our data to allow accurate interpolation of index to other wavelengths and temperatures. Citing the wide variety of values for the refractive indices of these two materials found in the literature, we reiterate the importance of measuring the refractive index of a sample from the same batch of raw material from which final optical components are cut when absolute accuracy greater than k5 x 10" is desired.

Abstract: A novel all-fiber refractometer sensor is proposed, which is based on multimode interference in the multimode fiber core section sandwiched between two single-mode fibers. A wide-angle beam propagation method in the cylindrical coordinate is employed as the modeling tool for simulation and design of the proposed refractometer sensor. The design for a refractometer is presented that shows that the refractometer would have an estimated resolution of 5.4 x 10(-5) for refractive indices from 1.33 to 1.45 and of 3.3 x 10(-5) for refractive indices from 1.38 to 1.45 through the choice of an appropriate length of the multimode fiber core section.

Abstract: We present highly sensitive refractometers based on a long-period grating in a large-mode-area photonic crystal fiber (PCF). The maximum sensitivity is 1500 nm/refractive index unit at a refractive index of 1.33, to our knowledge the highest reported for any fiber grating. The minimal detectable index change is 2 x 10(-5). The high sensitivity is obtained by infiltrating the sample into the holes of the PCF to give a strong interaction between the sample and the probing field.