Abstract: Exhaust emissions cause air pollution and climate change. The exhausts of shipboard fuel combustion are equally damaging particularly, so close to the environmentally sensitive mainland and island coasts, as well as at ports due to their urbanized character. This paper estimates, for the first time, exhaust pollutants related to cruise and ferry operations in Las Palmas Port and, in an island context. Emission assessment is based on a full bottom-up model and messages transmitted by the Automatic Identification System during 2011. Results are described as a breakdown of NOx, SOx, PM 2.5 , CO and CO 2 , according to ship classes, operative type and time, providing valuable information to environmental policy makers in port-city areas and islands under similar conditions. It is generally concluded that vessel traffic and passenger shipping in particular are a source of air pollution in Las Palmas Port. Emission maps confirm location of hot spots in quays assigned for cruise and ferry operations. Policy recommendations encourage regular monitoring of exhaust emissions and market-based incentives supported by details on polluting and operative profiles. On the other hand, feasibility studies are suggested for automated mooring, LNG bunkering facilities and also shore-side energy services, prioritizing berthing of shipping sectors (or sub-sectors) with the highest share of exhaust emissions once their local effects have been confirmed by a dispersion, exposure and impact assessment.

Abstract: Maritime supply chain sustainability has not been widely studied to date. This paper investigates the sustainability performance of five major UK ports. The UK port system is one of the largest and busiest port systems both in Europe and worldwide. The scope of sustainability narrows down to economical and environmental dimensions. A questionnaire is developed to collect data from port managers and logistics experts. The AHP method is utilized to rank the ports using the collected data. Sensitivity analysis is conducted on the obtained data to verify the consistency among data and outcomes.

Abstract: Port public–private partnerships (PPPs) are considered to be an important emerging mechanism for port development and improvement in port performance especially for developing countries. This paper empirically investigates the effect of institutional factors in the success of port’s PPPs; the latter defined as the attractiveness of the PPP project for private bidders and the market competitiveness of the facility. The empirical investigation of a large sample of ports finds that ‘regulatory quality’, ‘market openness’, ‘ease to start a business’ and ‘enforcing contracts’ are important institutional determinants of port PPP success and may ultimately contribute to port development and economic growth. The results are consistent with and add to the theoretical literature whereas practical implications for port authorities, managers and investors are discussed.

Abstract: According to a range of assessments, there exists a large cost-effective potential to increase energy efficiency in shipping through reduced speed at sea enabled by shorter time in port. This means that the energy needed can be reduced whilst maintaining the same transport service. However, the fact that a large cost-effective potential has been identified that is not being harnessed by decision-makers in practice suggests that there is more to this potential to understand. In this paper, the possibilities for increasing energy efficiency by reducing waiting time in port are explored and problematised through a case study of a short sea bulk shipping company transporting dry bulk goods mainly in the North and Baltic seas. Operational data from two ships in the company’s fleet for one year showed that the ships spent more than 40% of their time in ports and that half of the time in port was not productive. The two most important reasons for the large share of unproductive time were that ports were closed on nights and weekends and that ships arrived too early before the stevedores were ready to load or unload the cargo. Reducing all of the unproductive time may be difficult, but the results also show that even a conservative estimate of one to four hours of reduced time per port call would lead to a reduction in energy use of 2–8%. From in-depth interviews with employees of the shipping company, ports and ship agencies, a complex picture is painted when attempting to understand how this potential arises. Aspects such as a lack of effective ship-shore-port communication, little time for ship operators, an absence of means for accurately predicting energy use of voyages as a function of speed, perceived risk of arriving too late, and relationships with third-party technical management may all play a role.

Abstract: Ports play a critical role in the economy of many countries and regions. Failure or unreliability of port services can significantly influence port customers—shipping lines and cargo owners—and result in their dissatisfaction. However, what constitutes port service quality (PSQ) and its influence on the satisfaction of port customers has not been well investigated in the literature. Therefore, this study investigates the concept of PSQ and its influence on customer satisfaction in the case of Korean container ports. Following a literature review, a conceptual model of PSQ and its influence on customer satisfaction is proposed. The model was validated through a survey of 313 members of the Korean Port Logistics Association (KPLA). Partial least squares structural equation modeling (PLS-SEM) was conducted to confirm the PSQ dimensions and to examine their relationship with customer satisfaction using SmartPLS 3.2.1 software. PSQ is found to be a five-factor construct, and its management, and image and social responsibility factors have significant positive effects on customer satisfaction. In addition to its academic contribution, this study also contributes to management practices because port managers can use the PSQ scale to measure their customers’ satisfaction and justify investments in the quality management of port services.

Abstract: There are many studies on container port efficiency and that seek to understand what factors, such as technical and scale efficiency, private versus public terminal management or macro-economic factors, play on the efficiency score of a given port. There are fewer studies that focus on the role played by the inter-port competitive environment. This role remains difficult to assess. In fact, on the one hand, a port subject to high inter-port competition may record higher efficiency scores due to the pressure from the competitive environment. On the other hand, a port subject to high competition may be forced to over-invest and could therefore records a lower efficiency score. This article investigates this issue and examines how the degree of competition measured at different levels (local, regional and global level) impacts the efficiency score of a given container port. To do so, we implement a truncated regression with a parametric bootstrapping model. The model applied to information gathered for 200 container ports in 2007 and 2010 leads to the following conclusions: port efficiency decreases with competition intensity when measured in a range of 400–800 km (regional level); and the effect from competition is not significant when competition is measured at a local (less than 300 km) or at a global (more than 800 km) level. Estimates also show a tendency for ports who invested from 2007 to 2010 to experience a general decrease in efficiency scores, an element which could be explained by the time lag between the investment and the subsequent potential increase in container throughput.

Abstract: To quantify the impacts of tides on seaside operations in container ports, this study reformulates the berth allocation problem by modeling their impacts on the entrance/exit of vessels into/from ports. Furthermore, to mitigate the tidal impacts, we borrow the so-called virtual arrival policy, whose potential for reducing bunker fuel consumption and vessel emissions is widely recognized by the shipping industry, and accordingly retrofit the berth allocation model. In the latter model, the state-of-the-art technique of second-order cone programming is adopted to handle the nonlinear intractability involved. We conduct extensive numerical experiments to evaluate the impacts of tides on the seaside operations in a tidal container port, and also to verify the competence of the virtual arrival policy in delivering win-win economic and environmental benefits for both the port and shipping lines. It is also intriguing to observe that the virtual arrival policy would be an applicable substitute for the costly approach of deepening the navigation channel in a tidal port.

Abstract: The performance of the transport chain is important for the efficiency and competitiveness of an economy. In the context of port competition, there has been an increasing cooperation between firms involved in the intermodal transport chain including seaport services. This paper examines the economic incentives and welfare implications to the integration of port activities with inland transport services under inter-ports competition. Although ports find it advantageous to engage in such integration process it may be detrimental to welfare, since shippers’ aggregate surplus decreases – noting that farther away users benefit at the expense of those closer to the ports. Several scenarios not leading to such welfare decrease are identified: asymmetries in port capacities, government regulation and efficiency gains. These latter results provide support to policies that favor integration processes of transport services.

Abstract: This paper introduces an analysis framework for port connectivity from a global container liner shipping network perspective: it is defined in terms of the impact on the transportation network when the transshipment service is not available at the evaluated port. Under this framework, two models for port connectivity are introduced from transportation time and capacity. Compared with existing measures, the strength of our framework and models is not only that it provides scientific methods to compute port connectivity, but it is able to capture a global effect on how port connectivity contributes to the overall network for given shipping services.

Abstract: This paper considers a joint tactical planning problem for the number of ships, the planned maximum sailing speed, and the liner service schedule in order to simultaneously optimize the expected cost, the service reliability and the shipping emission in the presence of port time uncertainty. The problem is formulated into a stochastic multi-objective optimization problem at the operational level. The relationships between the objectives and the decision variables are established. A simulation-based non-dominated sorting genetic algorithm is then presented to solve this problem. A case study is provided to illustrate the results and the application of the model.

Abstract: This paper studies the opportunities coming from the use of consumer devices like smartphones and tablets to perform maintenance and assembly procedures with Augmented Reality (AR). Pros and cons are evaluated by comparing completion times and errors made while executing a maintenance procedure with an AR-based tool and paper-based instructions.

Abstract: Located along shorelines, seaports are highly vulnerable to coastal and marine natural disasters largely due to climate change. Damage caused by disasters can be prevented or alleviated if sufficient investments are made in a timely manner. However, despite a wide range of investment options and well-developed engineering expertise, port investment on disaster prevention remains a challenging task involving great complexities. This paper develops an integrated economic model for the analysis of disaster-prevention investments at a “landlord” port. It simultaneously considers the uncertainty of disaster occurrence and associated return of prevention investments, the information accumulation and related investment timing, and the benefit spillovers of investment among stakeholders. Our analysis shows that the timing of port investments depends on the probability of disasters. Immediate investment is optimal for disasters with very high probability, while investment should be postponed if such a probability is very low. Optimal timing for cases of intermediate probability cannot be determined analytically, as it is influenced by other factors such as discount rate, information accumulation and efficiency of investments. Positive spillovers between a port and its tenants lead to under-investment, which can be corrected by coordination between stakeholders. However, since there are risks of “overinvestment” (the marginal benefits of investments are zero ex post if there is no disaster), regulatory intervention is not always optimal when the regulator does not have a good understanding of disaster probability distribution. Therefore, scientific research would bring significant economic and strategic value to policy, planning and investment decisions.

Abstract: In this paper, we study the impact of using a new intelligent vehicle technology on the performance and total cost of a European port, in comparison with existing vehicle systems like trucks. Intelligent autonomous vehicles (IAVs) are a new type of automated guided vehicles (AGVs) with better maneuverability and a special ability to pick up/drop off containers by themselves. To identify the most economical fleet size for each type of vehicle to satisfy the port’s performance target, and also to compare their impact on the performance/cost of container terminals, we developed a discrete-event simulation model to simulate all port activities in micro-level (low-level) details. We also developed a cost model to investigate the present values of using two types of vehicle, given the identified fleet size. Results of using the different types of vehicles are then compared based on the given performance measures such as the quay crane net moves per hour and average total discharging/loading time at berth. Besides successfully identifying the optimal fleet size for each type of vehicle, simulation results reveal two findings: first, even when not utilising their ability to pick up/drop off containers, the IAVs still have similar efficacy to regular trucks thanks to their better maneuverability. Second, enabling IAVs’ ability to pick up/drop off containers significantly improves the port performance. Given the best configuration and fleet size as identified by the simulation, we use the developed cost model to estimate the total cost needed for each type of vehicle to meet the performance target. Finally, we study the performance of the case study port with advanced real-time vehicle dispatching/scheduling and container placement strategies. This study reveals that the case study port can greatly benefit from upgrading its current vehicle dispatching/scheduling strategy to a more advanced one.

Abstract: Climate change is having and will continue to have a range of negative impacts on social–environmental systems. Many ports, with their coastal locations and essential roles in regional and national economies, face particular exposure to storm impacts that may worsen with climate change. Currently in the United States port resilience planning falls primarily on port operators. Engaging a wider range of stakeholders in long-term seaport functioning may reduce risks from disruptive and potentially irreversible impacts of climate change. This study uses empirical data gathered through two case studies of highly exposed U.S. ports, Gulfport (MS) and Providence (RI), to identify strategies that port planners and external stakeholders consider feasible for enhancing their port's resilience. This article categorizes these resilience strategies and suggests the potential role that different stakeholders could play in facilitation and implementation.

Abstract: Described herein is a method and system for distributing request and responses across a multi-core system. Each core executes a packet engine that further processes data packets allocated to that core. A flow distributor executing within the multi-core system forwards client requests to a packet engine on a core that is selected based on a value generated when a hash is applied to a tuple comprising a client IP address, a client port, a server IP address and a server port identified in the request. The packet engine selects a first IP address and a first port of the core, and determines whether a hash of a tuple comprising those values identifies the selected core. A modification is then made to the client request so that the client request includes a tuple comprising the first IP address, the server IP address, the first port and the server port.

Abstract: An apparatus comprising an ingress port, an egress port, a port associated with a service function, a memory, and a processor coupled to the ingress port, the egress port, the port, and the memory, and configured to receive from the ingress port a data packet that comprises a packet header that is associated with a service identifier (ID), forward the data packet to the port for processing by the service function, receive the data packet from the port in response to forwarding the data packet to the port, and forward the data packet to the egress port to a network node.

Abstract: Over the past two decades, numerous ports located in China have participated in port integration strategies, thus influencing the entire port system. The current research is initiated in order to examine the nature of port integration in China, including associated temporal pathways, spatial patterns and dynamics. Results indicate that port integration in China has been characterized by a significant increase at the turn of the 21st century, comprising thirteen distinguishable pathways typified by differing dynamics, particularly between the northern and southern ports. Pathways were found to include 44 seaports and river ports, chiefly concentrated in the Bohai Rim, Yangtze (Changjiang) River Delta, Beibu Gulf and the southeastern Fujian, thus representing significant spatial regions. Categorically larger seaports have become the primary beneficiaries of port integration. Integration cases were divided into four categories based upon quantified dynamic magnitude including the government-driven mode, market-driven mode, government/market-driven mode and strategic alliance, and into five further categories based upon spatial extent including port internal integration, jurisdictional port integration, port integration across neighbor region, regional port integration and hub-feeder port integration. Results suggest that several factors have effectively driven port integration in China, including legislative tools and spatial planning, optimization of shoreline resources and port functionality, and port competition with the same hinterland.

Abstract: Liquefied natural gas (LNG) serves as an attractive fuel for ships to meet the upcoming stringent environmental regulations enacted by IMO, particularly at the level of emission control areas (ECA). The use of LNG promises a good environmental performance and a foreseeable economic viability. However, a general absence of bunkering infrastructure in seaports is a significant barrier currently preventing the breakthrough of the use of LNG as a ship fuel. Against this backdrop, we observe that public port authorities are playing a proactive role in facilitating the use of LNG as a marine fuel. The purpose of this paper was to analyze the role of port authorities in the development of LNG bunkering facilities and to investigate why and how port authorities promote this new application. A multiple-case study approach is adopted to examine the performance of eight North European port authorities in their LNG bunkering projects. The paper provides a deeper understanding of the current port practices in developing LNG bunkering facilities in North Europe and identifies the important role of the evolving port function beyond the tradition model in promoting innovations. The paper also proposes a set of port implementation policies on the facilitation and promotion of the use of LNG as a ship fuel.

Abstract: In the modern global business environment, port policymakers must continuously make an effort to understand what factors influence port users’ choice of port. This article identifies which factors affect port selection most strongly. It does so for three ports: Antwerp, Rotterdam and Hamburg – and three types of decision makers: shippers, carriers and freight forwarders. The Analytical Hierarchy Process method is applied to gauge port players’ prioritization of decision factors in port selection. Data are collected by means of two sets of questionnaire surveys. The prioritized criteria differ between the three mentioned respondent groups, which is attributed to their respective positions and responsibilities within the supply chain, and the contract of carriage concerned (carrier haulage or merchant haulage). The overall results yield the following ranking of port selection criteria in decreasing order of importance: port costs, geographical location, quality of hinterland connections, productivity and capacity. In respect of general port attractiveness, Antwerp is found to be the most attractive, followed by Rotterdam in second place, and Hamburg in third.

Abstract: In the last decade, inter-port competition in West Africa has become fiercer as captive hinterlands of ports continue to overlap and become contestable or shared. This is due to door-to-door supply chain services being offered by shipping lines and third party logistics service providers through inter-modalism. In addition, as cargo becomes more concentrated in the region, there have been calls for the selection of a hub location for shipping lines serving the region in order to exploit economies of scale. This paper therefore aims to evaluate the competitiveness of major ports in the West African region based on criteria selected by experts. Using the Analytic Hierarchy Process, port competitiveness was evaluated and ports ranked according to the total weights obtained based on the different criteria used. The Port of Abidjan emerged the most competitive port in West Africa with its strongest links being its efficiency and performance, infrastructure and political stability outlook in spite of recent political turmoil. The Lagos Port Complex, West Africa’s largest port in terms of scale and throughput, emerged fifth falling behind the Ports of Lome, Tema and Dakar respectively owing largely to its political stability outlook. The least competitive port was the Port of Cotonou in Benin.

Abstract: The purpose of this paper is to discuss the safety of ship berthing operations in port. Based on the features of ship's berthing operations and relevant literature, the Safety Factors (SFs) of ship berthing at docks are first investigated. A Safety Index (SI) with a Fuzzy Analytic Hierarchy Process (AHP) model is then proposed to assess those SFs from port marine pilots, by which port managers and ship carriers may make policies to improve ship berthing safety. To validate the model, berthing operations at Kaohsiung Port in Taiwan were empirically investigated. The results indicate the main safety factors affecting ship berthing at port docks are: working concentration, the condition of mooring lines, emergency response, port policy of improving business and berth length. Based on those results, the theoretical and managerial implications for ship berthing safety at dock are finally discussed.

Abstract: This paper provides guidance for an optimal and reasonable dry port layout for the port of Dalian in China. We present a two-phase framework on the location of dry ports, which solves the selection of candidate inland cities and optimal dry port location choice, respectively. Fuzzy C-Means Clustering is applied to select alternative cities in the vast hinterland of the seaport of Dalian, with a view to identify evaluation factors that affect the location selection decision. A cost-minimisation linear programming solution is proposed, with the aid of a genetic algorithm, to choose the optimal location as well as capacity level among the candidate inland cities.

Abstract: Most scientific attention in port studies centers on deep-sea ports, in particular container ports. In our paper, in contrast, we focus our attention on the characteristics of inland waterway ports in a European context. This is an overlooked part in the scientific literature on inland port development, which is up to now mainly concerned with US-based understandings of inland ports. We try to broaden the application of the inland port concept by explaining the development of inland ports in terms of inland waterway bounded cargo throughput. Based on a large-scale quantitative dataset of inland port development in Dutch municipalities we perform various statistical analyses to arrive at a more detailed understanding of the question: What are the characteristics of European inland waterway ports and what transport and economic factors influence cargo throughput on the municipal level? The results in particular highlight the importance of the presence of a container terminal, the diversity in types of goods which are being handled by the inland port and the accessibility of the inland port relative to the regional motorway network as important factors in explaining the size and growth of inland ports. Interestingly, the popular claim in policy of ‘investments in inland port development leading to employment growth’ cannot be confirmed.

Abstract: An example method for zero touch configuration and synchronization of a service appliance in a network environment includes receiving, at an appliance port on a service appliance, an indication that a switch port on a switch changed from an inactive status to an active status, the appliance port being connected over a network to the switch port, starting a bootstrap protocol, including by receiving at the service appliance from the switch, a bootstrap message from a service executing in the switch, creating, by the service appliance, an empty port channel at the service appliance, adding, by the service appliance, the appliance port to the port channel, and associating, by the service appliance, the service to the port channel in a cache.