Abstract: This review summarizes the current understanding of adsorption of polyelectrolytes to oppositely charged solid substrates, the resulting interaction forces between such substrates, and consequences for colloidal particle aggregation. The following conclusions can be reached based on experimental findings. Polyelectrolytes adsorb to oppositely charged solid substrates irreversibly up to saturation, whereby loose and thin monolayers are formed. The adsorbed polyelectrolytes normally carry a substantial amount of charge, which leads to a charge reversal. Frequently, the adsorbed films are laterally heterogeneous. With increasing salt levels, the adsorbed mass increases leading to thicker and more homogeneous films. Interaction forces between surfaces coated with saturated polyelectrolyte layers are governed at low salt levels by repulsive electric double layer interactions, and particle suspensions are stable under these conditions. At appropriately high salt levels, the forces become attractive, principally due to van der Waals interactions, but eventually also through other forces, and suspensions become unstable. This situation can be rationalized with the classical theory of Derjaguin, Landau, Verwey, and Overbeek (DLVO). Due to the irreversible nature of the adsorption process, stable unsaturated layers form in colloidal particle suspensions at lower polyelectrolyte doses. An unsaturated polyelectrolyte layer can neutralize the overall particle surface charge. Away from the charge reversal point, electric double layer forces are dominant and particle suspensions are stable. As the charge reversal point is approached, attractive van der Waals forces become important, and particle suspensions become unstable. This behaviour is again in line with the DLVO theory, which may even apply quantitatively, provided the polyelectrolyte films are sufficiently laterally homogeneous. For heterogeneous films, additional attractive patch–charge interactions may become important. Depletion interactions may also lead to attractive forces and suspension destabilization, but such interactions become important only at high polyelectrolyte concentrations.

Abstract: The present study investigates the possibility of inducing monovalent ion permselectivity on standard cation exchange membranes, by the layer-by-layer (LbL) assembly of poly(ethyleneimine) (PEI)/poly(styrenesulfonate) (PSS) polyelectrolyte multilayers. Coating of the (PEI/PSS)N LbL multilayers on the CMX membrane caused only moderate variation of the ohmic resistance of the membrane systems. Nonetheless, the polyelectrolyte multilayers had a substantial influence on the monovalent ion permselectivity of the membranes. Permselectivity comparable to that of a commercial monovalent-ion-permselective membrane was obtained with only six bilayers of polyelectrolytes, yet with significantly lower energy consumption per mole of Na(+) ions transported through the membranes. The monovalent ion permselectivity stems from an increased Donnan exclusion for divalent ions and hydrophobization of the surface of the membranes concomitant to their modification. Double-layer capacitance obtained from impedance measurements shows a qualitative indication of the divalent ion repulsion of the membranes. At overlimiting current densities, water dissociation occurred at membranes with PEI-terminated layers and increased with the number of layers, while it was nearly absent for the PSS-terminated layers. Hence, LbL layers allow switching on and turning off water splitting at the surface of ion exchange membranes.

Abstract: Complex coacervation is an electrostatically-driven phase separation phenomenon that is utilized in a wide range of everyday applications and is of great interest for the creation of self-assembled materials. Here, we utilized turbidity to characterize the effect of salt type on coacervate formation using two vinyl polyelectrolytes, poly(acrylic acid sodium salt) (pAA) and poly(allylamine hydrochloride) (pAH), as simple models for industrial and biological coacervates. We confirmed the dominant role of salt valence on the extent of coacervate formation, while demonstrating the presence of significant secondary effects, which can be described by Hofmeister-like behavior. These results revealed the importance of ion-specific interactions, which are crucial for the informed design of coacervate-based materials for use in complex ionic environments, and can enable more detailed theoretical investigations on the role of subtle electrostatic and thermodynamic effects in complex coacervation.

Abstract: A bio-inspired chemical approach has been developed for the surface modification, dispersion and electrophoretic deposition (EPD) of metal oxide particles. The study of the chemical mechanism of mussel adhesion to different surfaces has driven the development of advanced dispersing agents with strong adsorption to oxide nanoparticles. The investigation of dopamine, caffeic acid, tiron and other molecules from the catechol family, and various molecules from salicylic acid, gallic acid, and chromotropic acid families revealed their strong adsorption to metal oxide surfaces. The analysis of dispersion and deposition yield data for various materials provided an insight into the influence of molecular structures of the organic dispersants on adsorption mechanisms and EPD efficiency. The adsorbed dispersants imparted new and unique properties to the nanoparticles. Further advancements in the EPD technology were achieved by the use of cationic and anionic dyes such as pyrocatechol violet, celestine blue, alizarin red from the catechol family and alizarin yellow, aurintricarboxylic acid and calconcarboxylic acid from salicylate family and their derivatives. It was discovered that polyaromatic dyes can be used as efficient co-dispersants for oxide materials, carbon nanotubes and graphene for the fabrication of composite films by EPD. Another important breakthrough was the development of film forming dispersants for EPD nanotechnology. New strategies have emerged for the synthesis of non-agglomerated nanoparticles of controlled size, organic fibers and coated particles. The use of new dispersants with strong interfacial adsorption and multifunctional properties has driven the development of advanced composites, containing metal oxide nanoparticles, conductive polymers, carbon nanotubes, graphene, polyelectrolytes and other materials. Colloidal and interface chemistry of new dispersing agents is emerging as a new area of technological and scientific interest.

Abstract: Thin-film composite (TFC) polyamide reverse osmosis (RO) membranes are prone to biofouling due to their inherent physicochemical surface properties. In order to address the biofouling problem, we have developed novel surface coatings functionalized with biocidal silver nanoparticles (AgNPs) and antifouling polymer brushes via polyelectrolyte layer-by-layer (LBL) self-assembly. The novel surface coating was prepared with polyelectrolyte LBL films containing poly(acrylic acid) (PAA) and poly(ethylene imine) (PEI), with the latter being either pure PEI or silver nanoparticles coated with PEI (Ag–PEI). The coatings were further functionalized by grafting of polymer brushes, using either hydrophilic poly(sulfobetaine) or low surface energy poly(dimethylsiloxane) (PDMS). The presence of both LBL films and sulfobetaine polymer brushes at the interface significantly increased the hydrophilicity of the membrane surface, while PDMS brushes lowered the membrane surface energy. Overall, all surface modifications resulted in significant reduction of irreversible bacterial cell adhesion. In microbial adhesion tests with E. coli bacteria, a normalized cell adhesion in the range of only 4 to 16% on the modified membrane surfaces was observed. Modified surfaces containing silver nanoparticles also exhibited strong antimicrobial activity. Membranes coated with LBL films of PAA/Ag–PEI achieved over 95% inactivation of bacteria attached to the surface within 1 hour of contact time. Both the antifouling and antimicrobial results suggest the potential of using these novel surface coatings in controlling the fouling of RO membranes.

Abstract: We consider polyelectrolyte solutions which, under suitable conditions, phase separate into a liquid-like coacervate phase and a coexisting supernatant phase that exhibit an extremely low interfacial tension. Such interfacial tension provides the basis for most coacervate-based applications, but little is known about it, including its dependence on molecular weight, charge density, and salt concentration. By combining a Debye–Huckel treatment for electrostatic interactions with the Cahn–Hilliard theory, we derive explicit expressions for this interfacial tension. In the absence of added salts, we find that the interfacial tension scales as N–3/2(η/ηc–1)3/2 near the critical point of the demixing transition, and that it scales as η1/2 far away from it, where N is the chain length and η measures the electrostatic interaction strength as a function of temperature, dielectric constant, and charge density of the polyelectrolytes. For the case with added salts, we find that the interfacial tension scales with t...

Abstract: The competition of interactions between charged groups of polyanions and polycations and their interaction with small counterions strongly affect the formation and stability of polyelectrolyte multilayers. This has consequences for the properties of polyelectrolyte multilayers like mechanics, polymer mobility and swelling in water.

Abstract: This work demonstrates the feasibility of superhydrophilic polyelectrolyte brush coatings for anti-icing applications. Five different types of ionic and nonionic polymer brush coatings of 25–100 nm thickness were formed on glass substrates using silane chemistry for surface premodification followed by polymerization via the SI-ATRP route. The cationic [2-(methacryloyloxy)ethyl]trimethylammonium chloride] and the anionic [poly(3-sulfopropyl methacrylate), poly(sodium methacrylate)] polyelectrolyte brushes were further exchanged with H+, Li+, Na+, K+, Ag+, Ca2+, La3+, C16N+, F–, Cl–, BF4–, SO42–, and C12SO3– ions. By consecutive measurements of the strength of ice adhesion toward ion-incorporated polymer brushes on glass it was found that Li+ ions reduce ice adhesion by 40% at −18 °C and 70% at −10 °C. Ag+ ions reduce ice adhesion by 80% at −10 °C relative to unmodified glass. In general, superhydrophilic polyelectrolyte brushes exhibit better anti-icing property at −10 °C compared to partially hydrophobic ...

Abstract: The classical Voorn-Overbeek thermodynamic theory of complexation and phase separation of oppositely charged polyelectrolytes is generalized to account for the charge accessibility and hydrophobicity of polyions, size of salt ions, and pH variations. Theoretical predictions of the effects of pH and salt concentration are compared with published experimental data and experiments we performed, on systems containing poly(acrylic acid) (PAA) as the polyacid and poly(N,N-dimethylaminoethyl methacrylate) (PDMAEMA) or poly(diallyldimethyl ammonium chloride) (PDADMAC) as the polybase. In general, the critical salt concentration below which the mixture phase separates, increases with degree of ionization and with the hydrophobicity of polyelectrolytes. We find experimentally that as the pH is decreased below 7, and PAA monomers are neutralized, the critical salt concentration increases, while the reverse occurs when pH is raised above 7. We predict this asymmetry theoretically by introducing a large positive Flory parameter (= 0.75) for the interaction of neutral PAA monomers with water. This large positive Flory parameter is supported by molecular dynamics simulations, which show much weaker hydrogen bonding between neutral PAA and water than between charged PAA and water, while neutral and charged PDMAEMA show similar numbers of hydrogen bonds. This increased hydrophobicity of neutral PAA at reduced pH increases the tendency towards phase separation despite the reduction in charge interactions between the polyelectrolytes. Water content and volume of coacervate are found to be a strong function of the pH and salt concentration.

Abstract: Chitosan, the cationic polysaccharide derived from the natural polysaccharide chitin, has been studied as a biomaterial for more than two decades. As a polycationic polymer with favorable properties, it has been widely used to form polyelectrolyte complexes with polyanions for various applications in drug delivery fields. In recent years, a growing number of studies have been focused on the preparation of polyelectrolyte complexes based on chitosan and its water soluble derivatives. They have been considered well-suited as biomaterials for a number of vital drug carriers with targeted/controlled release profiles, e.g., films, capsules, microcapsules. In this work, an overview highlights not only the favorable properties of chitosan and its water soluble derivatives but also the good performance of the polyelectrolyte complexes produced based on chitosan. Their various types of applications as drug carriers are reviewed in detail.

Abstract: Charge-driven bridging of nanoparticles by macromolecules represents a promising route for engineering functional structures, but the strong electrostatic interactions involved when using conventional polyelectrolytes impart irreversible complexation and ill-defined structures. Recently it was found that the electrostatic interaction of silica nanoparticles with small globular proteins leads to aggregate structures that can be controlled by pH. Here we study the combined influence of pH and electrolyte concentration on the bridging aggregation of silica nanoparticles with lysozyme in dilute aqueous dispersions. We find that protein binding to the silica particles is determined by pH irrespective of the ionic strength. The hetero-aggregate structures formed by the silica particles with the protein were studied by small-angle X-ray scattering (SAXS) and the structure factor data were analyzed on the basis of a short-range square-well attractive pair potential (close to the sticky-hard-sphere limit). It is found that the electrolyte concentration has a strong influence on the stickiness near pH 5, where the weakly charged silica particles are bridged by the strongly charged protein. An even stronger influence of the electrolyte is found in the vicinity of the isoelectric point of the protein (pI = 10.7) and is attributed to shielding of the repulsion between the highly charged silica particles and hydrophobic interactions between the bridging protein molecules.

Abstract: The present study reports the development of a new generation of bio-based nanocomposite proton exchange membranes based on bacterial cellulose (BC) and poly(4-styrene sulfonic acid) (PSSA), produced by in situ free radical polymerization of sodium 4-styrenesulfonate using poly(ethylene glycol) diacrylate (PEGDA) as cross-linker, followed by conversion of the ensuing polymer into the acidic form. The BC nanofibrilar network endows the composite membranes with excellent mechanical properties at least up to 140 °C, a temperature where either pure PSSA or Nafion are soft, as shown by dynamic mechanical analysis. The large concentration of sulfonic acid groups in PSSA is responsible for the high ionic exchange capacity of the composite membranes, reaching 2.25 mmol g(-1) for a composite with 83 wt % PSSA/PEGDA. The through-plane protonic conductivity of the best membrane is in excess of 0.1 S cm(-1) at 94 °C and 98% relative humidity (RH), decreasing to 0.042 S cm(-1) at 60% RH. These values are comparable or even higher than those of ionomers such as Nafion or polyelectrolytes such as PSSA. This combination of electric and viscoelastic properties with low cost underlines the potential of these nanocomposites as a bio-based alternative to other polymer membranes for application in fuel cells, redox flow batteries, or other devices requiring functional proton conducting elements, such as sensors and actuators.

Abstract: Underwater adhesion has numerous potential medical, household, and industrial applications. It is typically achieved through covalent polymerization and cross-linking reactions and/or the use of highly specialized biological or biomimetic polymers. As a simpler alternative to these covalent and biomimetic strategies, this article shows that stiff, gel-like complexes that adhere to various substrates under water can also be prepared through the ionic cross-linking of common, commercial polyelectrolytes. The gels form spontaneously when synthetic polycations, such as poly(allylamine) (PAH), are mixed with strongly binding multivalent anions, pyrophosphate (PPi) and tripolyphosphate (TPP). The PAH/PPi and PAH/TPP gels exhibit very high storage moduli (G∞′ ≈ 400 kPa), self-heal when torn, and adhere to both hydrophilic and hydrophobic substrates under water (with short-term tensile adhesion strengths of 350–450 kPa). Furthermore, these gels can be dissolved on demand (if adhesion needs to be reversed) by chan...

Abstract: A series of copoly(arylene ether sulfone)s having precisely two, three or four quaternary ammonium (QA) groups clustered directly on single phenylene rings along the backbone are studied as anion exchange membranes. The copolymers are synthesized via condensation polymerizations involving either di-, tri- or tetramethylhydroquinone, followed by virtually complete benzylic bromination using N-bromosuccinimide and quaternization with trimethylamine. This synthetic strategy allows an excellent control and systematic variation of the local density and distribution of QA groups along the backbone. Small angle X-ray scattering of these copolymers shows extensive ionic clustering, promoted by an increasing density of QA on the single phenylene rings. At an ionexchangecapacity (IEC) of 2.1 meq. g-1, the water uptake decrease with an increasing local density of QA groups. Moreover, at moderate IECs at 20 °C the Br- conductivity of the densely functionalized copolymers is higher than a corresponding randomly functionalized polymer, despite the significantly higher water uptake of the latter. Thus, placing multiple cations on single aromatic rings in the polymers facilitates the formation of a distinct percolating hydrophilic phase domain with high ionic concentration to promote efficient anion transport, despite probable limitations by reduced ion dissociation. These findings imply a viable strategy to improve the performance of alkaline membrane fuel cells. (Less)

Abstract: Swelling behavior of polyelectrolyte and polyzwitterion brushes derived from poly(2-(dimethylamino)ethyl methacrylate) (PDMAEMA) in water vapor is investigated using a combination of neutron and X-ray reflectivity and spectroscopic ellipsometry over a wide range of relative humidity (RH) levels. The extent of swelling depends strongly on the nature of the side-chain chemistry. For parent PDMAEMA, there is an apparent enrichment of water vapor at the polymer/air interface. Despite extensive swelling at high humidity level, no evidence of charge repulsion is found in weak or strong polyelectrolyte brushes. Polyzwitterionic brushes swell to a greater extent than the quaternized brushes studied. However, for RH levels beyond 70%, the polyzwitterionic brushes take up less water molecules, leading to a decline in water volume fraction from the maximum of ∼0.30 down to ∼0.10. Using a gradient in polymer chain grafting density (σ), we provide evidence that this behavior stems from the formation of inter- and intr...

Abstract: In this work, single-walled carbon nanotube (SWCNT) fibers were produced from SWCNT polyelectrolyte dispersions stabilized by crown ether in dimethyl sulfoxide and coagulated into aqueous solutions. The SWCNT polyelectrolyte dispersions had concentrations up to 52 mg/mL and showed liquid crystalline behavior under polarized optical microscopy. The produced SWCNT fibers are neat (i.e., not forming composites with polymers) and showed a tensile strength up to 124 MPa and a Young's modulus of 14 GPa. This tensile strength is comparable to those of SWCNT fibers spun from strong acids. Conductivities on the order of 10(4) S/m were obtained by doping the fibers with iodine.

Abstract: By means of dissipative particle dynamics (DPD) and Monte Carlo (MC) simulations, we explored geometrical, transport, and sorption properties of hydrated Nafion-type polyelectrolyte membranes. Composed of a perfluorinated backbone with sulfonate side chains, Nafion self-assembles upon hydration and segregates into interpenetrating hydrophilic and hydrophobic subphases. This segregated morphology determines the transport properties of Nafion membranes that are widely used as compartment separators in fuel cells and other electrochemical devices, as well as permselective diffusion barriers in protective fabrics. We introduced a coarse-grained model of Nafion, which accounts explicitly for polymer rigidity and electrostatic interactions between anionic side chains and hydrated metal cations. In a series of DPD simulations with increasing content of water, a classical percolation transition from a system of isolated water clusters to a 3D network of hydrophilic channels was observed. The hydrophilic subphase ...

Abstract: Polysaccharide-based nanofibers with a multilayered structure are prepared by combining electrospinning (ESP) and layer-by-layer (LBL) deposition techniques. Charged nanofibers are firstly prepared by electrospinning poly(e-caprolactone) (PCL) with a block-copolymer bearing carboxylic acid functions. After deprotonation of the acid groups, the layer-by-layer deposition of polyelectrolyte polysaccharides, notably chitosan and hyaluronic acid, is used to coat the electrospun fibers. A multilayered structure is achieved by alternating the deposition of the positively charged chitosan with the deposition of a negatively charged polyelectrolyte. The construction of this multilayered structure is followed by Zeta potential measurements, and confirmed by observation of hollow nanofibers resulting from the dissolution of the PCL core in a selective solvent. These novel polysaccharide-coated PCL fiber mats remarkably combine the mechanical resistance typical of the core material (PCL)-particularly in the hydrated state-with the surface properties of chitosan. The control of the nanofiber structure offered by the electrospinning technology, makes the developed process very promising to precisely design biomaterials for tissue engineering. Preliminary cell culture tests corroborate the potential use of such system in wound healing applications.

Abstract: Single-walled carbon nanotubes (SWCNTs) dispersed in aqueous medium have many potential applications in chemistry, biology, and medicine. Reversible aggregation of SWCNTs dispersed in water has been frequently reported, but the mechanisms behind are not well understood. Here we show that SWCNTs dispersed into aqueous medium assisted by various charged molecules can be reversibly aggregated by a variety of electrolytes with two distinct mechanisms. Direct binding of counterions to SWCNTs leads to aggregation when the surface charge is neutralized from 74 to 86%. This aggregation is driven by electrostatic instead of van der Waals interactions, thus showing similarity to that of DNA condensation induced by multivalent cations. Sequestration of counterions by chelating reagents leads to the redispersion of SWCNT aggregates. In contrast to various metal ions, polyelectrolytes have the unique ability to induce SWCNT aggregation by bridging between individual SWCNTs. Aggregation through the latter mechanism can...

Abstract: It is hard to obtain spatially ordered nanostructures via the polyion complexation process due to the inherent flexibility of polymers and isotropicity of ionic interactions. Here we report the formation of polyion assemblies with well-defined, periodically regular internal structure by imparting the proper stiffness to the molecular tile. A stiff bisligand TPE-C4-L2 was designed which is able to form a negatively charged supramolecular polyelectrolyte with transition metal ions. This supramolecular polyelectrolyte slowly self-assembled into polydispersed flat sheets with cocoon-like patterns. Upon the addition of an oppositely charged ordinary polyelectrolyte, the polydispersed cocoons immediately transformed into ultralong, uniform nanoladders as a result of matched ionic density recognition. The supramolecular polyelectrolytes assembled side-by-side, and the negative charges aligned in an array. This structure forced the positively charged polymers to lie along the negative charges so that the perpendi...

Abstract: Structurally tunable two-dimensional (2D) arrays of nanoscale objects are important for modulating functional responses of thin films. We demonstrate that such tunable and ordered nanoparticles (NP) arrays can be assembled at charged air-water interfaces from nanoparticles coated with polyelectrolyte chains, DNA. The electrostatic attraction between the negatively charged nonhybridizing DNA-coated gold NPs and a positively charged lipid layer at the interface facilitates the formation of a 2D hexagonally closed packed (HCP) nanoparticle lattice. We observed about 4-fold change of the monolayer nanoparticle density by varying the ionic strength of the subphase. The tunable NP arrays retain their structure reasonably well when transferred to a solid support. The influence of particle’s DNA corona and lipid layer composition on the salt-induced in-plane and normal structural evolution of NP arrays was studied in detail using a combination of synchrotron-based in situ surface scattering methods, grazing incid...