Phosphor

Abstract: Phosphor-converted white light-emitting diodes (pc-WLEDs) are emerging as an indispensable solid-state light source for the next generation lighting industry and display systems due to their unique properties including but not limited to energy savings, environment-friendliness, small volume, and long persistence. Until now, major challenges in pc-WLEDs have been to achieve high luminous efficacy, high chromatic stability, brilliant color-rending properties, and price competitiveness against fluorescent lamps, which rely critically on the phosphor properties. A comprehensive understanding of the nature and limitations of phosphors and the factors dominating the general trends in pc-WLEDs is of fundamental importance for advancing technological applications. This report aims to provide the most recent advances in the synthesis and application of phosphors for pc-WLEDs with emphasis specifically on: (a) principles to tune the excitation and emission spectra of phosphors: prediction according to crystal field theory, and structural chemistry characteristics (e.g. covalence of chemical bonds, electronegativity, and polarization effects of element); (b) pc-WLEDs with phosphors excited by blue-LED chips: phosphor characteristics, structure, and activated ions (i.e. Ce 3+ and Eu 2+ ), including YAG:Ce, other garnets, non-garnets, sulfides, and (oxy)nitrides; (c) pc-WLEDs with phosphors excited by near ultraviolet LED chips: single-phased white-emitting phosphors (e.g. Eu 2+ –Mn 2+ activated phosphors), red-green-blue phosphors, energy transfer, and mechanisms involved; and (d) new clues for designing novel high-performance phosphors for pc-WLEDs based on available LED chips. Emphasis shall also be placed on the relationships among crystal structure, luminescence properties, and device performances. In addition, applications, challenges and future advances of pc-WLEDs will be discussed.

Abstract: A green emitting phosphor with very bright and long lasting phosphorescence has been newly developed. The incorporation of ion into the system as an auxiliary activator dominates the phosphorescence, thermoluminescence, and photoconductivity characteristics of the phosphor to a large extent. Evidence is presented for the mechanism that the phosphorescence is ascribed to the photoconductivity due to holes, and to the trapping and thermal release of the holes by ions in the system. The incorporation of the ion forms a highly dense trapping level located at a suitable depth in relation to the thermal release rate at room temperature, thus producing the very bright and long phosphorescence.

Abstract: By combining electron paramagnetic resonance (EPR), optical absorption, and photoluminescence (PL) spectroscopy, a strong correlation is observed between the green 510 nm emission, the free‐carrier concentration, and the density of singly ionized oxygen vacancies in commercial ZnO phosphor powders. From these results, we demonstrate that free‐carrier depletion at the particle surface, and its effect on the ionization state of the oxygen vacancy, can strongly impact the green emission intensity. The relevance of these observations with respect to low‐voltage field emission displays is discussed.

Abstract: To facilitate the next generation of high-power white-light-emitting diodes (white LEDs), the discovery of more efficient red-emitting phosphor materials is essential. In this regard, the hardly explored compound class of nitridoaluminates affords a new material with superior luminescence properties. Doped with Eu(2+), Sr[LiAl3N4] emerged as a new high-performance narrow-band red-emitting phosphor material, which can efficiently be excited by GaN-based blue LEDs. Owing to the highly efficient red emission at λ(max) ~ 650 nm with a full-width at half-maximum of ~1,180 cm(-1) (~50 nm) that shows only very low thermal quenching (>95% relative to the quantum efficiency at 200 °C), a prototype phosphor-converted LED (pc-LED), employing Sr[LiAl3N4]:Eu(2+) as the red-emitting component, already shows an increase of 14% in luminous efficacy compared with a commercially available high colour rendering index (CRI) LED, together with an excellent colour rendition (R(a)8 = 91, R9 = 57). Therefore, we predict great potential for industrial applications in high-power white pc-LEDs.