TL;DR: In this article, a periodic array of microscopic air holes that run along the entire fiber length are used to guide light by corralling it within a periodic arrays of microscopic holes.
Abstract: Photonic crystal fibers guide light by corralling it within a periodic array of microscopic air holes that run along the entire fiber length Largely through their ability to overcome the limitations of conventional fiber optics—for example, by permitting low-loss guidance of light in a hollow core—these fibers are proving to have a multitude of important technological and scientific applications spanning many disciplines The result has been a renaissance of interest in optical fibers and their uses
TL;DR: In this paper, the authors review the recent developments in the area of optical fiber grating sensors, including quasi-distributed strain sensing using Bragg gratings, systems based on chirped gratings and intragrating sensing concepts.
Abstract: We review the recent developments in the area of optical fiber grating sensors, including quasi-distributed strain sensing using Bragg gratings, systems based on chirped gratings, intragrating sensing concepts, long period-based grating sensors, fiber grating laser-based systems, and interferometric sensor systems based on grating reflectors.
TL;DR: In this paper, the spectral properties of fiber reflection and transmission gratings are described and examples are given to illustrate the wide variety of optical properties that are possible in fiber gratings.
Abstract: In this paper, we describe the spectral characteristics that can be achieved in fiber reflection (Bragg) and transmission gratings. Both principles for understanding and tools for designing fiber gratings are emphasized. Examples are given to illustrate the wide variety of optical properties that are possible in fiber gratings. The types of gratings considered include uniform, apodized, chirped, discrete phase-shifted, and superstructure gratings; short-period and long-period gratings; symmetric and tilted gratings; and cladding-mode and radiation-mode coupling gratings.
TL;DR: Fiber Bragg grating (FBG) technology has been extensively studied in the literature as mentioned in this paper, where the basic techniques for fiber grating fabrication, their characteristics, and the fundamental properties of fiber gratings are described.
Abstract: The historical beginnings of photosensitivity and fiber Bragg grating (FBG) technology are recounted. The basic techniques for fiber grating fabrication, their characteristics, and the fundamental properties of fiber gratings are described. The many applications of fiber grating technology are tabulated, and some selected applications are briefly described.
TL;DR: Bragg gratings have been produced in germanosilicate optical fibers by exposing the core, through the side of the cladding, to a coherent UV two-beam interference pattern with a wavelength selected to lie in the oxygen-vacancy defect band of germania, near 244 nm.
Abstract: Bragg gratings have been produced in germanosilicate optical fibers by exposing the core, through the side of the cladding, to a coherent UV two-beam interference pattern with a wavelength selected to lie in the oxygen-vacancy defect band of germania, near 244 nm. Fractional index perturbations of approximately 3 x 10(-5) have been written in a 4.4-mm length of the core with a 5-min exposure. The Bragg filters formed by this new technique had reflectivities of 50-55% and spectral widths, at half-maximum, of 42 GHz.