TL;DR: Efficient, scalable cobalt-catalyzed redox-neutral [4+2] annulation of readily available oximes and alkyne is reported, which progresses smoothly by way of a reversible cyclometallation without any external oxidizing agent, and produces only water as the side product.
Abstract: Efficient, scalable cobalt-catalyzed redox-neutral [4+2] annulation of readily available oximes and alkyne is reported. The developed synthetic methodology is widely applicable and tolerates various functional groups including heterocycles. A stable Cp*Co(III) neutral complex is employed as the catalyst for this redox-neutral [4+2] annulation reaction, which progresses smoothly by way of a reversible cyclometallation without any external oxidizing agent, and produces only water as the side product.
TL;DR: The present review summarizes primary publications on the cross-dehydrogenative C–O coupling, with special emphasis on the studies published after 2000, and classes the data according to the structures of C-reagents and the type of oxidative systems.
Abstract: The present review summarizes primary publications on the cross-dehydrogenative C-O coupling, with special emphasis on the studies published after 2000. The starting compound, which donates a carbon atom for the formation of a new C-O bond, is called the CH-reagent or the C-reagent, and the compound, an oxygen atom of which is involved in the new bond, is called the OH-reagent or the O-reagent. Alcohols and carboxylic acids are most commonly used as O-reagents; hydroxylamine derivatives, hydroperoxides, and sulfonic acids are employed less often. The cross-dehydrogenative C-O coupling reactions are carried out using different C-reagents, such as compounds containing directing functional groups (amide, heteroaromatic, oxime, and so on) and compounds with activated C-H bonds (aldehydes, alcohols, ketones, ethers, amines, amides, compounds containing the benzyl, allyl, or propargyl moiety). An analysis of the published data showed that the principles at the basis of a particular cross-dehydrogenative C-O coupling reaction are dictated mainly by the nature of the C-reagent. Hence, in the present review the data are classified according to the structures of C-reagents, and, in the second place, according to the type of oxidative systems. Besides the typical cross-dehydrogenative coupling reactions of CH- and OH-reagents, closely related C-H activation processes involving intermolecular C-O bond formation are discussed: acyloxylation reactions with ArI(O2CR)2 reagents and generation of O-reagents in situ from C-reagents (methylarenes, aldehydes, etc.).
TL;DR: Self-healing oxime-functional hydrogels have been developed that undergo a reversible gel-to-sol transition via oxime exchange under acidic conditions and can either form dynamic-covalent or physically-crosslinked gels, both of which demonstrate reversible gelation behavior.
Abstract: Self-healing oxime-functional hydrogels have been developed that undergo a reversible gel-to-sol transition via oxime exchange under acidic conditions. Keto-functional copolymers were prepared by conventional radical polymerization of N,N-dimethylacrylamide (DMA) and diacetone acrylamide (DAA). The resulting water soluble copolymers (P(DMA-stat-DAA)) were chemically crosslinked with difunctional alkoxyamines to obtain hydrogels via oxime formation. Gel-to-sol transitions were induced by the addition of excess monofunctional alkoxyamines to promote competitive oxime exchange under acidic conditions at 25 °C. The hydrogel could autonomously heal after it was damaged due to the dynamic nature of the oxime crosslinks. In addition to their chemo-responsive behavior, the P(DMA-stat-DAA) copolymers exhibit cloud points which vary with the DAA content in the copolymers. This thermo-responsive behavior of the P(DMA-stat-DAA) was utilized to form physical hydrogels above their cloud point. Therefore, these materials can either form dynamic-covalent or physically-crosslinked gels, both of which demonstrate reversible gelation behavior.
TL;DR: α,β-Unsaturated oxime pivalates are proposed to undergo reversible C(sp(2))-H insertion with cationic Rh(III) complexes to furnish five-membered metallacycles to give 2,3-dihydropyridine products in good yields.
Abstract: α,β-Unsaturated oxime pivalates are proposed to undergo reversible C(sp2)–H insertion with cationic Rh(III) complexes to furnish five-membered metallacycles. In the presence of 1,1-disubstituted olefins, these species participate in irreversible migratory insertion to give, after reductive elimination, 2,3-dihydropyridine products in good yields. Catalytic hydrogenation can then be used to convert these molecules into piperidines, which are important structural components of numerous pharmaceuticals.
TL;DR: This work has shown that the reactivity of α-imino carbenoids derived from α-diazo oxime ethers with 2H-azirines provides highly substituted pyrazines in good to excellent yields in pyrazine synthesis.
TL;DR: A survey of the literature describing synthetic applications of oxime ethers can be found in this paper, where cyclization and metal-catalyzed cross-coupling reactions are discussed.
Abstract: This review is a survey of the literature describing synthetic applications of oxime ethers. The cyclization and metal-catalyzed cross-coupling reactions of oxime ethers in recent years are also highlighted.
TL;DR: It is shown that an ortho boronic acid substituent makes aryl ketones rapidly conjugate with α-nucleophiles at neutral pH, comparable to the fastest bioorthogonal conjugations known to date.
Abstract: Bioorthogonal reactions that are fast and reversible under physiological conditions are in high demand for biological applications. Herein, it is shown that an ortho boronic acid substituent makes aryl ketones rapidly conjugate with α-nucleophiles at neutral pH. Specifically, 2-acetylphenylboronic acid and derivatives were found to conjugate with phenylhydrazine with rate constants of 10(2) to 10(3) M(-1) s(-1) , comparable to the fastest bioorthogonal conjugations known to date. (11) B NMR analysis revealed the varied extent of iminoboronate formation of the conjugates, in which the imine nitrogen forms a dative bond with boron. The iminoboronate formation activates the imines for hydrolysis and exchange, rendering these oxime/hydrazone conjugations reversible and dynamic under physiological conditions. The fast and dynamic nature of the iminoboronate chemistry should find wide applications in biology.
TL;DR: In this article, the discovery and development of boron-assisted oxime formation as a powerful connective reaction for chemical biology was reported, and oximes proximal to boronic acids form in neutral aqueous buffer with rate constants of more than 104 M−1 s−1, the largest to date for any oxime condensation.
Abstract: We report here the discovery and development of boron-assisted oxime formation as a powerful connective reaction for chemical biology. Oximes proximal to boronic acids form in neutral aqueous buffer with rate constants of more than 104 M−1 s−1, the largest to date for any oxime condensation. Boron's dynamic coordination chemistry confers an adaptability that seems to aid a number of elementary steps in the oxime condensation. In addition to applications in bioconjugation, the emerging importance of boronic acids in chemical biology as carbohydrate receptors or peroxide probes, and the growing list of drugs and drug candidates containing boronic acids suggest many potential applications.
TL;DR: A rhodium(III)-catalyzed dehydrogenative cross-coupling reaction has been developed for the synthesis of bi(hetero)aryl structures by using oxime ethers as the directing group and features a relatively broad substrate scope and a good tolerance of functional groups.
TL;DR: In this article, a Cu-catalyzed reaction of α-diazo oxime ethers with 2H-azirines under optimized reaction conditions is described, with good yields.
Abstract: Highly substituted unsymmetrical pyrazine derivatives are obtained in good to excellent yields by Cu-catalyzed reaction of α-diazo oxime ethers with 2H-azirines under optimized reaction conditions.
TL;DR: A direct catalytic synthesis of substituted α-benzyloxyamino-γ-butyrolactones is reported, starting from simple oxime acids and alkenes, via Polar Radical Crossover Cycloaddition (PRCC) reactions.
TL;DR: In this paper, a magnetically recoverable oxime palladium palladium catalyst was developed for cross-coupling reaction of aryl iodides and bromides in aqueous media.
Abstract: A novel magnetic nanoparticle-supported oxime palladacycle catalyst was successfully prepared and characterized. The magnetically recoverable catalyst was evaluated in the room temperature Suzuki–Miyaura cross-coupling reaction of aryl iodides and bromides in aqueous media. The catalyst was shown to be highly active under phosphine-free and low Pd loading (0.3 mol%) conditions. The catalyst could be easily separated from the reaction mixture using an external magnet and reused for six consecutive runs without significant loss of activity.
TL;DR: The reaction with substituted alkyne transferred the oxime functionality intramolecularly from one carbon atom to another via the 7-endo-dig cyclization process, which is unprecedented in the literature and is named an oxime-oxime rearrangement.
TL;DR: Several examples of the quinoline-annulated porphyrins were crystallographically characterized, proving their connectivity and showing their conformations that are extremely distorted from planarity.
Abstract: An acid-induced reaction of meso-tetraphenyl-2-hydroxyimino-3-oxoporphyrin leads, with concomitant loss of water, to a formal electrophilic aromatic substitution of the ortho-position of the phenyl group adjacent to the oxime, forming a quinoline moiety. Owing in part to the presence of a π-extended chromophore, the resulting meso-triphenylmonoquinoline-annulated porphyrin (λmax = 750 nm) possesses a much altered optical spectrum from that of the starting oxime (λmax = 667 nm). An oxidative DDQ-induced ring-closure process is also possible, generating the corresponding meso-triphenylmonoquinoline-annulated porphyrin quinoline N-oxide, possessing a slightly shifted and sharpened UV–vis spectrum (λmax = 737 nm). The connectivity of the chromophores was conclusively shown by NMR spectroscopy. Both ketone functionalities in meso-tetraphenyl-2,3-dioxoporphyrin can be converted, via the oxime and using the acid- or oxidant-induced reaction pathways, either in one step or in a stepwise fashion, to bisquinoline-a...
TL;DR: FeCl 3 ·6H 2 O as discussed by the authors is a solid phase reaction that involves in situ formation of oxime, cleavage of C−C bond and formation of C-N bond.
TL;DR: In this article, the effects of Bronsted acid strength and pore confinement on the Beckmann rearrangement (BR) reaction over solid acid catalysts have been explored, and it was demonstrated that oximes with different size exhibit quite different BR reactivity dependence on the acid strength over microporous and mesoporous zeolites.
TL;DR: A direct strategy to obtain N-acyl amino acid oxime esters has been developed through the dynamic kinetic resolution of azlactones with oximes in excellent enantiomeric excesses and high yields.
TL;DR: It is demonstrated that oxime ether strobilurin derivatives containing benzofurans can be used as possible lead compounds for developing novel fungicides.
TL;DR: It was demonstrated that introduction of the chlorine atom at the C-2' or C- 2',6' position on the E ring of picropodophyllotoxin was important for the insecticidal activity and introduction of a halogen atom-substituted phenylsulfonyl group on the oxime fragment of 2'(2',6')-(di)chloropicropodopyllones could lead to more promising compounds.
Abstract: To discover novel natural-product-based pesticidal agents, we prepared a series of oxime sulfonate derivatives of 2'(2',6')-(Di)chloropicropodophyllotoxins by structural modification of podophyllotoxin. Their structures were well-characterized by proton nuclear magnetic resonance ((1)H NMR), high-resolution mass spectrometry (HRMS), optical rotation, and melting point. Moreover, the key steric structure of compound 5f was unambiguously determined by single-crystal X-ray diffraction. Additionally, their insecticidal activity was evaluated at 1 mg/mL against the pre-third-instar larvae of oriental armyworm (Mythimna separata Walker), a typical lepidopteran pest. Among all derivatives, compounds 4c, 5c, and 5d exhibited more promising insecticidal activity, with the final mortality rates greater than 60%, when compared to their precursor podophyllotoxin and the positive control, toosendanin. It demonstrated that introduction of the chlorine atom at the C-2' or C-2',6' position on the E ring of picropodophyllotoxin or oxime sulfonate derivatives of picropodophyllotoxin was important for the insecticidal activity and introduction of a halogen (e.g., fluorine, chlorine, or bromine) atom-substituted phenylsulfonyl group on the oxime fragment of 2'(2',6')-(di)chloropicropodophyllones could lead to more promising compounds.
TL;DR: Aldoxime-derived azobenzene-containing probe, (E)-4-((E)-(4-(bis(2-hydroxyethyl)amino)phenyl)diazenyl)benzaldehyde oxime (Azo-2), was synthesized and characterized as mentioned in this paper.
Abstract: A molecular probe based on the newly exploited aldoxime chemistry was designed for the dual sensing of Hg 2+ and F − ions. Aldoxime-derived azobenzene-containing probe, (E)-4-((E)-(4-(bis(2-hydroxyethyl)amino)phenyl)diazenyl)benzaldehyde oxime (Azo-2), was synthesized and characterized. Azo-2 exhibited excellent sensitivity and selectivity toward mercury ions through a Hg 2+ ion-catalyzed dehydration reaction at pH = 5 in a DMSO/H 2 O mixture (0.5/9.5, v/v). The probe exhibited a 70 nm red shift in its absorption maximum upon the addition of Hg 2+ ions, which was accompanied by a change in the color of the solution from pale yellow to dark violet. Interestingly, Azo-2 also exhibited high sensitivity and selectivity toward F − ions in a DMSO solution, which was achieved by the F − ion-induced deprotonation of oxime-OH and the subsequent formation of an energetically favored HF 2 − species. A change in the color of the solution from pale yellow to dark red helped detect F − ion visibly. The oxime-fluoride interaction and HF 2 − formation were confirmed by 1 H and 19 F nuclear magnetic resonance (NMR) spectroscopy. The oxime anion generated by F − in a DMSO solution was reacted with water molecules to return to the original protonated oxime, proving that the entire process is reversible.
TL;DR: In this article, the first Pd(II) complexes containing a phosphino-oxime ligand were shown to be active in the catalytic rearrangement of aldoximes.
TL;DR: Twenty‐one novel oxime ether strobilurins containing indole moiety, which employed an indole group to stabilize the E‐styryl group in Enoxastrobin, were designed and synthesized and exhibited remarkably high activities.
Abstract: Twenty-one novel oxime ether strobilurins containing indole moiety, which employed an indole group to stabilize the E-styryl group in Enoxastrobin, were designed and synthesized. The biological assay indicated that most compounds exhibited potent fungicidal activities. The structure-activity relationship study demonstrated that the synthesized methyl 3-methoxypropenoate oxime ethers 7b-e exhibited remarkably high activities among all the synthesized oxime ether compounds 7. Moreover, the fungicidal activities of methyl α-(methoxyimino)benzeneacetate oxime ethers compounds 7f-i and N-methoxy-carbamic acid methyl esters compounds 7j-m showed significant differences compared to the corresponding products of ammonolysis.
TL;DR: Single crystal X-ray diffraction study revealed that the zinc ion is situated in distorted trigonal-bipyramidal environment where the equatorial position is occupied by the nitrogen atom of pyridine ring and the oxygen atoms of acetate groups of two oxime ligand.
Abstract: A new water soluble zinc complex has been prepared and structurally characterized. The Zn(II) complex was synthesized by the reaction of 2,6-diacetylpyridine dihydrazone (dph) with {4-[(2E)-2-(hydroxyimino)acetyl]phenoxy} acetic acid (H₂L) in the presence of zinc(II) acetate. Single crystal X-ray diffraction study revealed that the zinc ion is situated in distorted trigonal-bipyramidal environment where the equatorial position is occupied by the nitrogen atom of pyridine ring and the oxygen atoms of acetate groups of two oxime ligands (H₂L) whereas the axial positions of the zinc complex are occupied by the imine nitrogen atoms of dph ligand. Characterization of the complex with FTIR, (1)H and (13)C NMR, UV-vis and elemental analysis also confirmed the proposed structure. Interaction of the Zn(II) complex with calf-thymus DNA (CT-DNA) was investigated through UV-vis spectroscopy and viscosity measurements. The results suggest that the complex preferably bind to DNA through the groove binding mode. The zinc complex cleaves plasmid pBR 322 DNA in the presence and absence of an oxidative agent (H₂O₂), possibly through a hydrolytic pathway which is also supported by DNA cleave experiments in the presence of different radical scavengers. The nuclease activity of the zinc complex significantly depends on concentration of the complex and incubation time both in the presence and absence of H₂O₂. DNA cleave activity is inhibited in the presence of methyl green indicating that the zinc complex seems to bind the major groove of DNA.
TL;DR: A new pentadentate oxime has been designed to drive the preferential coordination favored by Co(I) in catalysts used for proton/water reduction and exhibits H(+) reduction activity in the presence of weak acids in MeCN and evolves H2 upon protonation suggesting that the ligand design increases catalyst effectiveness.
Abstract: A new pentadentate oxime has been designed to drive the preferential coordination favored by CoI in catalysts used for proton/water reduction. The ligand incorporates water upon metal coordination and is water soluble. This CoIII species is doubly reduced to CoI and exhibits H+ reduction activity in the presence of weak acids in MeCN and evolves H2 upon protonation suggesting that the ligand design increases catalyst effectiveness. Superior catalysis is observed in water with a turnover number (TON) of 5700 over 18 h. However, the catalyst yields Co-based nanoparticles, indicating that the solvent media may dictate the nature of the catalyst.
TL;DR: The reactivity of 2,2-bis(furan-2-yl)propane towards nitroso-and azoalkenes was explored in this paper, where the expected hetero-Diels-Alder adducts, 4a,7a-dihydro-4H-furo[2,3-e][1,2]oxazines and 4a-7a]-pyridazines, were obtained in good yield.
TL;DR: The first use of methyl 2-pyridyl ketone oxime (mpkoH) in zinc(II)/lanthanide(III) chemistry leads to the first families of dinuclear Zn(II)Ln( III) complexes displaying blue-green, ligand-based photoluminescence.
Abstract: The first use of methyl 2-pyridyl ketone oxime (mpkoH) in zinc(II)/lanthanide(III) chemistry leads to the [ZnLn(mpko)3(mpkoH)3](ClO4)2 and [ZnLn(NO3)2(mpko)3(mpkoH)] families of dinuclear ZnIILnIII complexes displaying blue-green, ligand-based photoluminescence; the ZnIIDyIII compound shows field-induced relaxation of magnetization.
TL;DR: A broad spectrum of O-aryloximes is readily available on treatment of inexpensive oximes with symmetrical diaryliodonium salts in the absence of a transition metal as discussed by the authors.
Abstract: A broad spectrum of O-aryloximes is readily available on treatment of inexpensive oximes with symmetrical diaryliodonium salts in the absence of a transition metal.
TL;DR: The results showed that, out of these molecules tested, 7b elicits a more potent depressant effect on contractility and relaxation, and competitively antagonizes β1-adrenergic receptors.
TL;DR: The B(C6 F5 )3 -catalyzed hydrogenation is applied to aldoxime triisopropylsilyl ethers and hydrazones bearing an easily removable phthaloyl protective group and successfully hydrogenated in nondonating toluene.
Abstract: The B(C6 F5 )3 -catalyzed hydrogenation is applied to aldoxime triisopropylsilyl ethers and hydrazones bearing an easily removable phthaloyl protective group. The CN reduction of aldehyde-derived substrates (oxime ethers and hydrazones) is enabled by using 1,4-dioxane as the solvent known to participate as the Lewis-basic component in FLP-type heterolytic dihydrogen splitting. More basic ketone-derived hydrazones act as Lewis bases themselves in the FLP-type dihydrogen activation and are therefore successfully hydrogenated in nondonating toluene. The difference in reactivity between aldehyde- and ketone-derived substrates is also reflected in the required catalyst loading and dihydrogen pressure.