TL;DR: This work shows true five-dimensional optical recording by exploiting the unique properties of the longitudinal surface plasmon resonance (SPR) of gold nanorods, which exhibits an excellent wavelength and polarization sensitivity, whereas the distinct energy threshold required for the photothermal recording mechanism provides the axial selectivity.
Abstract: In the cause of cramming more and more data onto optical storage devices, materials scientists have sought to add extra dimensions to recording media, literally. Now a group from Melbourne's Swinburne University of Technology has developed a five-dimensional optical recording technique with the potential to increase storage capacities by several orders of magnitude. The extra dimensions are the wavelength and polarization of light, which integrated with the familiar three spatial dimensions creates true five-dimensional recording within one volume. The result is a theoretical 1.6 terabytes capacity for a DVD-sized disk. The new system makes use of surface plasmon resonance (SPR)-mediated photothermal reshaping of a substrate of gold nanorods immersed in a polymer layer. Crosstalk-free readout is via two-photon luminescence. Immediate applications can be found in security patterning and multiplexed optical storage. By exploiting not only the three spatial dimensions but also other ways to record information, it is theoretically possible to store much more onto an optical device such as a DVD than has hitherto been possible. Here, a five-dimensional optical recording technique using polarization of light and its wavelength as the two additional dimensions, is demonstrated. The method consists of using a substrate of gold nanorods immersed in polymer. Multiplexed optical recording provides an unparalleled approach to increasing the information density beyond 1012 bits per cm3 (1 Tbit cm-3) by storing multiple, individually addressable patterns within the same recording volume. Although wavelength1,2,3, polarization4,5,6,7,8 and spatial dimensions9,10,11,12,13 have all been exploited for multiplexing, these approaches have never been integrated into a single technique that could ultimately increase the information capacity by orders of magnitude. The major hurdle is the lack of a suitable recording medium that is extremely selective in the domains of wavelength and polarization and in the three spatial domains, so as to provide orthogonality in all five dimensions. Here we show true five-dimensional optical recording by exploiting the unique properties of the longitudinal surface plasmon resonance (SPR) of gold nanorods. The longitudinal SPR exhibits an excellent wavelength and polarization sensitivity, whereas the distinct energy threshold required for the photothermal recording mechanism provides the axial selectivity. The recordings were detected using longitudinal SPR-mediated two-photon luminescence, which we demonstrate to possess an enhanced wavelength and angular selectivity compared to conventional linear detection mechanisms. Combined with the high cross-section of two-photon luminescence, this enabled non-destructive, crosstalk-free readout. This technique can be immediately applied to optical patterning, encryption and data storage, where higher data densities are pursued.
TL;DR: The challenges for heat-assisted magnetic recording are surveyed and the progress that has been made in addressing them are surveyed.
Abstract: Heat-assisted magnetic recording is a promising approach for enabling large increases in the storage density of hard disk drives. A laser is used to momentarily heat the recording area of the medium to reduce its coercivity below that of the applied magnetic field from the recording head. In such a system, the recording materials have a very high magnetic anisotropy, which is essential for the thermal stability of the magnetization of the extremely small grains in the medium. This technology involves new recording physics, new approaches to near field optics, a recording head that integrates optics and magnetics, new recording materials, lubricants that can withstand extremely high temperatures, and new approaches to the recording channel design. This paper surveys the challenges for this technology and the progress that has been made in addressing them.
TL;DR: What is to the authors' knowledge the first high-density (>10(12) bits/cm(3)) optical recording of digital information in a multilayered, three-dimensional format is reported.
Abstract: What is to our knowledge the first high-density (>1012 bits/cm3) optical recording of digital information in a multilayered, three-dimensional format is reported. Information is written as submicrometer volume elements of increased refractive index in a photopolymer by two-photon excitation of a photoinitiator at the waist of a highly focused beam from a colliding-pulse mode-locked laser. Quadratic dependence of two-photon excitation on intensity confines polymerization to the focal volume. Information is read with sufficient axial resolution by differential interference contrast microscopy. This write-once, read-many technique should increase the capacity of the spinning disk format by 100-fold.
TL;DR: In this paper, a new concept is proposed for an optical probe with spatial resolution unlimited by diffraction effects, based on optical-field confinement by surface plasmons of a submicrometer-sized metal particle.
Abstract: A new concept is proposed for an optical probe with spatial resolution unlimited by diffraction effects. It is based on optical-field confinement by surface plasmons of a submicrometer-sized metal particle. The particle serves as an antenna that receives an incoming electromagnetic field. The field extends to a nearby sample surface and interacts with a small area on that surface through the nonlinear susceptibility tensors. The induced sample polarization is reradiated by the particle, thereby generating a Raman, a two-photon, or a second-harmonic spectrum. Microscopy is performed by rastering the position of the metal particle over the sample surface. Spatial resolution approaching 1 nm is projected. The concept is also applicable to submicrometer optical lithography and ultrahigh-density optical recording.