Galvanic anode

Abstract: Rechargeable aqueous zinc-ion batteries have been considered as a promising candidate for next-generation batteries. However, the formation of zinc dendrites are the most severe problems limiting their practical applications. To develop stable zinc metal anodes, a synergistic method is presented that combines the Cu-Zn solid solution interface on a copper mesh skeleton with good zinc affinity and a polyacrylamide electrolyte additive to modify the zinc anode, which can greatly reduce the overpotential of the zinc nucleation and increase the stability of zinc deposition. The as-prepared zinc anodes show a dendrite-free plating/stripping behavior over a wide range of current densities. The symmetric cell using this dendrite-free anode can be cycled for more than 280 h with a very low voltage hysteresis (93.1 mV) at a discharge depth of 80 %. The high capacity retention and low polarization are also realized in Zn/MnO2 full cells.

Abstract: The surface chemistry of solid electrolyte interphase is one of the critical factors that govern the cycling life of rechargeable batteries. However, this chemistry is less explored for zinc anodes, owing to their relatively high redox potential and limited choices in electrolyte. Here, we report the observation of a zinc fluoride-rich organic/inorganic hybrid solid electrolyte interphase on zinc anode, based on an acetamide-Zn(TFSI)2 eutectic electrolyte. A combination of experimental and modeling investigations reveals that the presence of anion-complexing zinc species with markedly lowered decomposition energies contributes to the in situ formation of an interphase. The as-protected anode enables reversible (~100% Coulombic efficiency) and dendrite-free zinc plating/stripping even at high areal capacities (>2.5 mAh cm‒2), endowed by the fast ion migration coupled with high mechanical strength of the protective interphase. With this interphasial design the assembled zinc batteries exhibit excellent cycling stability with negligible capacity loss at both low and high rates. Zinc chemistry is not favourable to the formation of a solid electrolyte interphase as a result of its high redox potential. In a break with the traditional wisdom, the present authors realise ZnF2-rich hybrid SEI on Zn anode via the modulation of cationic speciation in a eutectic electrolyte.

Abstract: Aqueous zinc-ion batteries are largely restricted by the unsatisfactory performance of zinc (Zn) anodes, including their poor stability and irreversibility. In particular, the mechanism behind the electrochemical contrast caused by the surface crystal plane, which is a decisive factor of the electrochemical characteristics of the hostless Zn anode, is still relatively indistinct. Hence, new insight into a novel anode with a surface-preferred (002) crystal plane is provided. The interfacial reaction and morphology evolution are revealed by theoretical analysis and post-mortem/operando experimental techniques, indicating that Zn anodes with more exposed (002) basal planes exhibit free dendrites, no by-products, and weak hydrogen evolution, in sharp contrast to the (100) plane. These features benefit the Zn (002) anode by enabling a long cyclic life of more than 500 h and a high average coulombic efficiency of 97.71% for symmetric batteries, along with delivering long cycling stability and reversibility with life spans of over 2000 cycles for full batteries. This work provides new insights into the design of high-performance Zn anodes for large-scale energy storage and can potentially be applied to other metal anodes suffering from instability and irreversibility.

Abstract: Zn metal has been considered as a promising anode material for rechargeable aqueous metal-ion batteries. However, the propensity of dendrite growth during plating restricts its practical applicatio...