About: Fourier transform spectroscopy is a research topic. Over the lifetime, 5418 publications have been published within this topic receiving 134133 citations.
TL;DR: The theory and instrumentation for Fourier transform infrared spectrometry are discussed, and important areas of chemistry include atmospheric monitoring, surface chemistry, and on-line identification of chromatographically separated materials.
Abstract: The theory and instrumentation for Fourier transform infrared spectrometry are discussed. These instruments measure infrared spectra of the same quality as spectra measured on grating spectrometers in about one thousandth of the time. Their sensitivity advantage for spectra measured in equal times is between a factor of 10 and 100. Commercial spectrometers are now available from nine vendors in North America. Important areas of chemistry include atmospheric monitoring, surface chemistry, and on-line identification of chromatographically separated materials. Many new biochemical and biomedical applications are also becoming apparent, including investigations of phase transitions in lipids and studies of the biocompatibility of implant polymers.
TL;DR: In this paper, the application of a new Fourier transform technique to magnetic resonance spectroscopy is explored, which consists of applying a sequence of short rf pulses to the sample to be investigated and Fourier-transforming the response of the system.
Abstract: The application of a new Fourier transform technique to magnetic resonance spectroscopy is explored. The method consists of applying a sequence of short rf pulses to the sample to be investigated and Fourier‐transforming the response of the system. The main advantages of this technique compared with the usual spectral sweep method are the much shorter time required to record a spectrum and the higher inherent sensitivity. It is shown theoretically and experimentally that it is possible to enhance the sensitivity of high resolution proton magnetic resonance spectroscopy in a restricted time up to a factor of ten or more. The time necessary to achieve the same sensitivity is a factor of 100 shorter than with conventional methods. The enhancement of the sensitivity is essentially given by the square root of the ratio of line width to total width of the spectrum. The method is of particular advantage for complicated high resolution spectra with much fine structure.
TL;DR: This review describes dual-comb spectroscopy and summarizes the current state of the art and suggests that frequency comb technology will continue to mature and could surpass conventional broadbandSpectroscopy for a wide range of laboratory and field applications.
Abstract: Dual-comb spectroscopy is an emerging new spectroscopic tool that exploits the frequency resolution, frequency accuracy, broad bandwidth, and brightness of frequency combs for ultrahigh-resolution, high-sensitivity broadband spectroscopy. By using two coherent frequency combs, dual-comb spectroscopy allows a sample’s spectral response to be measured on a comb tooth-by-tooth basis rapidly and without the size constraints or instrument response limitations of conventional spectrometers. This review describes dual-comb spectroscopy and summarizes the current state of the art. As frequency comb technology progresses, dual-comb spectroscopy will continue to mature and could surpass conventional broadband spectroscopy for a wide range of laboratory and field applications.