About: Flame ionization detector is a research topic. Over the lifetime, 3409 publications have been published within this topic receiving 59976 citations. The topic is also known as: FID.
TL;DR: In this paper, a variation of the thermal/optical reflectance method has been applied to over 27,000 samples taken in more than a dozen urban and regional air quality studies in the U.S.
TL;DR: In this article, an approach for relating flame ionization detector relative response factors to the effective carbon number (ECN) of neat and derivatized components is presented. But this approach can be used for detecting polycyclic aromatic hydrocarbons and oxygenated organics.
Abstract: Equations are given for relating flame ionization detector relative response factors to the effective carbon number (ECN) of neat and derivatized components. The ECN ap proach can be used for calculating relative response fac tors in cases where pure materials are not available for detector calibration. Examples of this approach are given for the analysis of polycyclic aromatic hydrocarbons and oxygenated organics in neat form, alcohols and acids as the trimethylsilylated derivatives, and carbohydrates as the trimethylsilyl-oxime derivatives.
TL;DR: In this article, trace gas and particle emissions were measured from 47 laboratory fires burning 16 regionally to globally significant fuel types, including coal, rice straw, methanol, and acetic acid.
Abstract: Trace gas and particle emissions were measured from 47 laboratory fires burning 16 regionally to globally significant fuel types. Instrumentation included the following: open-path Fourier transform infrared spectroscopy; proton transfer reaction mass spectrometry; filter sampling with subsequent analysis of particles with diameter <2.5 μm for organic and elemental carbon and other elements; and canister sampling with subsequent analysis by gas chromatography (GC)/flame ionization detector, GC/electron capture detector, and GC/mass spectrometry. The emissions of 26 compounds are reported by fuel type. The results include the first detailed measurements of the emissions from Indonesian fuels. Carbon dioxide, CO, CH 4 , NH 3 , HCN, methanol, and acetic acid were the seven most abundant emissions (in order) from burning Indonesian peat. Acetol (hydroxyacetone) was a major, previously unobserved emission from burning rice straw (21-34 g/kg). The emission factors for our simulated African fires are consistent with field data for African fires for compounds measured in both the laboratory and the field. However, the higher concentrations and more extensive instrumentation in this work allowed quantification of at least 10 species not previously quantified for African field fires (in order of abundance): acetaldehyde, phenol, acetol, glycolaldehyde, methylvinylether, furan, acetone, acetonitrile, propenenitrile, and propanenitrile. Most of these new compounds are oxygenated organic compounds, which further reinforces the importance of these reactive compounds as initial emissions from global biomass burning. A few high-combustion-efficiency fires emitted very high levels of elemental (black) carbon, suggesting that biomass burning may produce more elemental carbon than previously estimated.
TL;DR: In this paper, a comparison of VOC source profiles for painting and printing between Beijing and other parts of the world showed significant region-specific discrepancies, probably because of different market demands and environmental standards.
TL;DR: In this paper, a gas chromatograph (GC) equipped with Hydrogen Flame Ionization Detector and Electron Capture Detector (ECD) can measure CH4, CO2, and N2O simultaneously in an air sample in four minutes.
Abstract: Combining improved injector, gas line and valve-driving models, a gas chromatograph (GC) equipped with Hydrogen Flame Ionization Detector (FID) and Electron Capture Detector (ECD), can measure CH4, CO2, and N2O simultaneously in an air sample in four minutes. Test results show that the system has high sensitivity, resolution, and precision; the linear response range of the system meets the requirement of flux measurements in situ. The system is suitable for monitoring fluxes of the main greenhouse gases in a short-plant field since it is easy to use, efficacious, and constant and reliable in collecting data.