Abstract: Silk spinning by insects and spiders leads to the formation of fibres that exhibit high strength and toughness. The lack of understanding of the protein processing in silk glands has prevented the recapitulation of these properties in vitro from reconstituted or genetically engineered silks. Here we report the identification of emulsion formation and micellar structures from aqueous solutions of reconstituted silkworm silk fibroin as a first step in the process to control water and protein-protein interactions. The sizes (100-200 nm diameter) of these structures could be predicted from hydrophobicity plots of silk protein primary sequence. These micelles subsequently aggregated into larger 'globules' and gel-like states as the concentration of silk fibroin increased, while maintaining solubility owing to the hydrophilic regions of the protein interspersed among the larger hydrophobic regions. Upon physical shearing or stretching structural transitions, increased birefringence and morphological alignment were demonstrated, indicating that this process mimics the behaviour of similar native silk proteins in vivo. Final morphological features of these silk materials are similar to those observed in native silkworm fibres.

Abstract: We describe the generation of transgenic silkworms that produce cocoons containing recombinant human collagen. A fusion cDNA was constructed encoding a protein that incorporated a human type III procollagen mini-chain with C-propeptide deleted, a fibroin light chain (L-chain), and an enhanced green fluorescent protein (EGFP). This cDNA was ligated downstream of the fibroin L-chain promoter and inserted into a piggyBac vector. Silkworm eggs were injected with the vectors, producing worms displaying EGFP fluorescence in their silk glands. The cocoons emitted EGFP fluorescence, indicating that the promoter and fibroin L-chain cDNAs directed the synthesized products to be secreted into cocoons. The presence of fusion proteins in cocoons was demonstrated by immunoblotting, collagenase-sensitivity tests, and amino acid sequencing. The fusion proteins from cocoons were purified to a single electrophoretic band. This study demonstrates the viability of transgenic silkworms as a tool for producing useful proteins in bulk.

Abstract: Spider capture silk is a natural material that outperforms almost any synthetic material in its combination of strength and elasticity. The structure of this remarkable material is still largely unknown, because spider-silk proteins have not been crystallized. Capture silk is the sticky spiral in the webs of orb-weaving spiders. Here we are investigating specifically the capture spiral threads from Araneus, an ecribellate orb-weaving spider. The major protein of these threads is flagelliform protein, a variety of silk fibroin. We present models for molecular and supramolecular structures of flagelliform protein, derived from amino acid sequences, force spectroscopy (molecular pulling) and stretching of bulk capture web. Pulling on molecules in capture-silk fibres from Araneus has revealed rupture peaks due to sacrificial bonds, characteristic of other self-healing biomaterials. The overall force changes are exponential for both capture-silk molecules and intact strands of capture silk.

Abstract: An electrospinning process was used to fabricate silk fibroin (SF) nanofiber nonwovens for wound dressing applications. The electrospinning of regenerated SF was performed with formic acid as a spinning solvent. For crystallization, as-spun SF nanofiber nonwovens were chemically treated with an aqueous methanol solution of 50%. The morphology, porosity and conformational structures of as-spun and chemically treated SF nanofibers were investigated by scanning electron microscopy (SEM), mercury porosimetry, wide angle X-Ray diffraction (WAXD), attenuated total reflectance infrared spectroscopy (ATR-IR), solid state 13C CP/MAS nuclear magnetic resonance (NMR) spectroscopy. SEM micrograph showed that the electrospun SF nanofibers had an average diameter of 80 nm and a distribution in diameter ranging from 30 to 120 nm. The porosity of as-spun SF nanofiber nonwovens was 76.1%, indicating it was highly porous. Conformational transitions of the as-spun SF nanofibers from random coil to β-sheet by aqueous methanol treatment occurred rapidly within 10 min, confirmed by solid-state 13C NMR, ATR-IR, and X-Ray diffraction.

Abstract: The present invention provides an all-aqueous process and composition for production of silk biomaterials, e.g., fibers, films, foams and mats. In the process, at least one biocompatible polymer, such as poly(ethylene oxide) (PEO) (a well-documented biocompatible material), was blended with the silk protein prior to processing e.g., electrospinning. We discovered that this step avoids problems associated with conformational transitions of fibroin during solubilization and reprocessing from aqueous solution which lead to embrittled materials. Moreover, the process avoids the use of organic solvents that can pose problems when the processed biomaterials are exposed to cells in vitro or in vivo.

Abstract: The fabrication of apatite-organic polymer hybrids is one of several attractive methods for the development of biomaterials as a substitute for bone. Such materials have both bone-bonding ability and mechanical properties analogous to natural bone. The biomimetic process has focused attention on fabricating such hybrids, where bone-like apatite is deposited on an organic polymer surface in solutions that mimic physiological conditions. In this process, a bone-like apatite layer can be coated onto organic substrates either by using a simulated body fluid (SBF) with ion concentrations nearly equal to those of human extracellular fluid, or by using fluids that are supersaturated with respect to apatite at ambient conditions. In this study, we investigated the ability of natural silk and its related materials to facilitate apatite deposition under biomimetic conditions. Cloths made of raw silk or normal silk fibers were soaked in 1.5SBF, which has 1.5 times the ion concentration of SBF. Sericin film, which is made from an extract of degummed raw silk, was soaked in 1.5SBF. The cloth and the film soaked in 1.5SBF then were characterized by scanning electron microscopic (SEM) observation, energy dispersive X-ray microanalysis (EDX), and thin-film X-ray diffraction (TF-XRD). Apatite deposition was observed on the surface of cloth made from raw silk fiber after it was soaked in 1.5SBF, but it was not observed on cloth made from normal silk fibers. The apatite deposition on the raw silk fiber cloth was accelerated when the fibers were subjected to treatment with CaCl(2) solution at a concentration of at least 1 kmol/m(3) before immersion in 1.5SBF. Apatite deposition also was observed on the sericin film after the film was soaked in 1.5SBF for 7 days. These results indicate that apatite deposition on raw silk cloth is attributable to the catalytic effect of sericin because the surface of raw silk consists of sericin whereas that of normal silk contains fibroin. The deposition of the apatite and its crystal growth are accelerated by the presence of calcium ions on the sericin after treatment with CaCl(2) solution. Thus, sericin on natural silk fiber has the potential to facilitate apatite deposition and can be useful as a polymer material in the fabrication of hybrid materials analogous to bone through biomimetic processes.

Abstract: Regenerated Antheraea pernyi silk fibroin film was prepared by dissolution of native silk fiber in aqueous lithium thiocyanate. The influence of aqueous ethanol treatment of the dried regenerated film on molecular conformation was studied by X-ray diffraction, infrared spectroscopy, differential scanning calorimetry, and thermogravimetric analysis. While the initial regenerated film consisted of α-helix and random coil components, aqueous ethanol treatment of the film resulted in significant increase in β-sheet component and improvement of water resistance of the film. This effect was strongly dependent on ethanol concentration, and 40–60% (w/w) ethanol was most effective due to balance of hydrophilic/hydrophobic action of the solvent. Copyright © 2003 John Wiley & Sons, Ltd.

Abstract: Fibrous proteins unlike globular proteins, contain repetitive amino acid sequences, giving rise to very regular secondary protein structures. Silk fibroin from a wild silkworm, Samia cynthia ricini...

Abstract: Fibroin-hydrogel sponge and collagen gel were used as scaffold for in vitro cartilage regeneration. Fibroin-hydrogel sponge was formed by phase separation from freezed fibroin solution. Chondrocytes were harvested from proximal humerus, distal femur and proximal tibia of 4-week-old Japanese white rabbits and inoculated in the fibroin-hydrogel sponge and collagen gel. Those constructs were cultured in DMEM supplemented with 10% FCS and 50 ml L-ascorbate at 37 degrees C. Histological observation, measurement of sulfated glycosaminoglycan and cell density were carried out at 3, 7, and 14 days after the cultivation. Well-defined cartilage tissue can be seen both in the fibroin-hydrogel sponge and in the collagen gel. The matrix was intensely stained by safranin-O and showed a metachromatic reaction in both group. However, the quantity of sulfated glycosaminoglycan and cell density of the fibroin-hydrogel sponge group were increased more rapidly than these of the collagen gel group. Thus, the chondrocytes proliferated in the fibroin sponge without losing their differentiated phenotype. It is possible that culture environment in the fibroin sponge was suitable for chondrocytes regeneration.

Abstract: Spiders synthesize several kinds of silk fibers. In the primary structure of spider silk, one of the major ampullate (dragline, frame) silks, spidroin 1, and flagelliform silk (core fibers of adhesive spiral), there are common repeated X-Gly-Gly (X = Ala, Leu, Pro, Tyr, Glu, and Arg) sequences, which are considered to be related to the elastic character of these fibers. In this paper, two dimensional spin diffusion solid-state NMR under off magic angle spinning (OMAS), (13)C chemical shift contour plots, and Rotational Echo DOuble Resonance (REDOR) were applied to determine the torsion angles of one Ala and two kinds of Gly residues in the Ala-Gly-Gly sequence of (13)C=O isotope-labeled (Ala-Gly-Gly)(10). The torsion angles were determined to be (phi, psi) = (-90 degrees, 150 degrees ) within an experimental error of +/-10 degrees for each residue. This conformation is characterized as 3(1) helix which is in agreement with the structure proposed from the X-ray powder diffraction pattern of poly(Ala-Gly-Gly). The 3(1) helix of (Ala-Gly-Gly)(10) does not change by formic acid treatment although (Ala-Gly)(15) easily changes from the silk I conformation (the structure of Bombyx mori silk fibroin before spinning in the solid state) to silk II conformation (the structure of the silk fiber after spinning) by such treatment. Thus, the 3(1) helix conformation of (Ala-Gly-Gly)(10) is considered very stable. Furthermore, the torsion angles of the 16th Leu residue of (Leu-Gly-Gly)(10) were also determined as (phi, psi) = (-90 degrees, 150 degrees ) and this peptide is also considered to take 3(1) helix conformation.

Abstract: The fiber formation mechanism of Bombyx mori silk fibroin by silkworm is essentially the structural change from silk I (the silk fibroin structure before spinning in the solid state) to silk II (the silk fibroin structure after spinning) under external forces in both silk gland and spinneret of B. mori silkworm. Recently, we proposed structural models for silk I and silk II forms of the model peptide (Ala-Gly)15 of B. mori silk fibroin using mainly solid-state NMR methods. In this paper, molecular dynamics (MD) calculation was performed to simulate the structural change of poly(Ala-Gly) from silk I to silk II and to clarify the detailed mechanism of the silk fiber formation. The silk I structure (repeated β-turn type II) changes to silk II structure (heterogeneous structure, but mainly antiparallel β-sheet) by stretching of the chain with MD simulation, but the change occurs only under very high temperature such as 1000 K and large tensile stress (1.0 GPa). However, the structural change during the MD sim...

Abstract: There are many kinds of silks from silkworms and spiders with different structures and properties, and thus, silks are suitable to study the structure-property relationship of fibrous proteins. Silk fibroin from a wild silkworm, Samia cynthia ricini, mainly consists of the repeated similar sequences by about 100 times where there are alternative appearances of the polyalanine (Ala)12–13 region and the Gly-rich region. In this paper, a sequential model peptide, GGAGGGYGGDGG(A)12GGAGDGYGAG, which is a typical sequence of the silk fibroin, was synthesized, and the atomic-level conformations of Gly residues at the N- and C-terminal ends of the polyalanine region were determined as well as that of the central Ala residue using 13C 2D spin diffusion solid-state nuclear magnetic resonance (NMR) under off-magic angle spinning. In the model peptide with α-helical conformation, the torsion angle of the central Ala residue, the 19th Ala, was determined to be (ϕ, ψ) = (−60°, −50°), which was a typical α-helical structure, but the torsion angles of two Gly residues, the 12th and 25th Gly residues, which are located at the N- and C-terminal ends of the polyalanine region, were determined to be (ϕ,ψ) = (−70°, −30°) and (ϕ,ψ) = (−70°, −20°), respectively. Thus, it was observed that the turns at both ends of polyalanine with α-helix conformation in the model peptide are tightly wound.

Abstract: Atomic force microscopy was adopted to study the nanoscopic structure formation of natural fibrous protein, fibroin from the Samia cynthia ricini wild silkworm. We have observed highly ordered nanoscale textile-fabric-like structures of fibroin molecules. From AFM and SDS-PAGE experiments, it was revealed that fibroin molecules have a rigid rodlike structure and form aggregates by end-to-end interactions of molecules. By analogy with Bombyx mori fibroin, S. c. ricini fibroin is supposed to assemble by electrostatic interactions of molecules.

Abstract: Viscosity and light-scattering measurements are performed on two dilute aqueous solutions of regenerated silk fibroin (RSF) of Bombyx mori silkworms obtained by dialysis against 6 M LiBr and pure water solutions at ambient temperature. The reduced viscosity of the RSF solutions in 6 M LiBr is found to decrease with decreasing polymer concentration C down to a certain concentration Cc but to increase below Cc. Static light scattering (SLS) for the same system shows that C/Rθ, where Rθ is the Rayleigh ratio, is at its minimum at near Cc. Dynamic light scattering (DLS) has revealed that silk fibroin molecules are present as a mixture of single molecules and aggregates in such a way that the majority of fibroin molecules are present as multichain aggregates above Cc and they start to dissociate below Cc, where most of them become isolated chains. Such a dissociation process of fibroin aggregates is not observed for the RSF solutions in pure water, in which multichain aggregates are dominantly present at highe...

Abstract: 13C−2H REDOR NMR experiments were performed on 30-residue (AlaGly)15 silk I mimics of Bombyx mori silk fibroin to gain structural details about the elusive structure of the silk I conformation. 13C,2H-labeling strategies are illustrated for measuring individual dihedral angles in peptides and for determining local structure by REDOR. A major turn of type II character is found in the region Gly(14)-Ala(17).

Abstract: Genetic engineering strategies were applied to synthesize silk-like materials, [(GVPGV)(2)GG(GAGAGS)(3)AS](n). The primary structure of these materials represents the repetitive crystalline region of Bombyx mori silk fibroins incorporated with an elastic motif selected from animal elastin. The oligonucleotides were designed to encode the desired recombinant proteins and then expressed in the Escherichi coli system. The expression and purification conditions for the production of the recombinant proteins were optimized. (13)C CP/MAS NMR was used for structural characterization in the solid state, where the isotope labeling was performed using a modified M9 medium. The secondary structures of these materials are primarily governed by the designated amino acid sequence, where the B. mori silk fibroin block, (GAGAGS)(3), tends to form the crystalline region, which is interrupted by the flexible (GVPGV)(2) block. The CD data suggested that the structure of these materials was length-dependent in the solution state, i.e., a higher molecule weight leads to a higher ordered structure.