Explosion welding

TL;DR: In this article, an analytical calculation for determination of weldability domain or welding window is presented, where the welding conditions are tailored through parallel geometry route with different explosive loads and the study is also conducted to consider the effects of explosive loading on the bonding interface and the characterization of explosive welding experiments carried out under different conditions.

TL;DR: In this paper, approximated examples of the use of the electron beam are given by the welding, rapid prototyping, texturing surface, cladding with wire and powder as well as alloying.

TL;DR: In this article, stainless steel-titanium plates were joined explosively employing oblique geometry route at different explosive ratios and the bonding was investigated using optical and scanning electron microscopy and tensile-shearing, bending, hardness and corrosion tests were carried out.

TL;DR: In this article, the potential for the use of lightweight materials (aluminum alloys, magnesium alloys and titanium alloys) in high volume vehicle manufacturing is discussed. And the feasibility of implementing these techniques in the industrial setup is discussed, and mechanical properties of welds such as hardness, shear and tensile strength are analyzed.