About: Electro-optic modulator is a research topic. Over the lifetime, 5380 publications have been published within this topic receiving 76377 citations. The topic is also known as: EOM.
TL;DR: In this article, an electron wave analog of the electro-optic light modulator is proposed, where magnetized contacts are used to preferentially inject and detect specific spin orientations.
Abstract: We propose an electron wave analog of the electro‐optic light modulator. The current modulation in the proposed structure arises from spin precession due to the spin‐orbit coupling in narrow‐gap semiconductors, while magnetized contacts are used to preferentially inject and detect specific spin orientations. This structure may exhibit significant current modulation despite multiple modes, elevated temperatures, or a large applied bias.
TL;DR: Electro-optic modulators are one of the most critical components in optoelectronic integration, and decreasing their size may enable novel chip architectures, and here a high-speed electro-optical modulator in compact silicon structures is experimentally demonstrated.
Abstract: Metal interconnections are expected to become the limiting factor for the performance of electronic systems as transistors continue to shrink in size. Replacing them by optical interconnections, at different levels ranging from rack-to-rack down to chip-to-chip and intra-chip interconnections, could provide the low power dissipation, low latencies and high bandwidths that are needed. The implementation of optical interconnections relies on the development of micro-optical devices that are integrated with the microelectronics on chips. Recent demonstrations of silicon low-loss waveguides, light emitters, amplifiers and lasers approach this goal, but a small silicon electro-optic modulator with a size small enough for chip-scale integration has not yet been demonstrated. Here we experimentally demonstrate a high-speed electro-optical modulator in compact silicon structures. The modulator is based on a resonant light-confining structure that enhances the sensitivity of light to small changes in refractive index of the silicon and also enables high-speed operation. The modulator is 12 micrometres in diameter, three orders of magnitude smaller than previously demonstrated. Electro-optic modulators are one of the most critical components in optoelectronic integration, and decreasing their size may enable novel chip architectures.
TL;DR: An approach based on a metal–oxide–semiconductor (MOS) capacitor structure embedded in a silicon waveguide that can produce high-speed optical phase modulation is described and an all-silicon optical modulator with a modulation bandwidth exceeding 1 GHz is demonstrated.
Abstract: Silicon has long been the optimal material for electronics, but it is only relatively recently that it has been considered as a material option for photonics1. One of the key limitations for using silicon as a photonic material has been the relatively low speed of silicon optical modulators compared to those fabricated from III–V semiconductor compounds2,3,4,5,6 and/or electro-optic materials such as lithium niobate7,8,9. To date, the fastest silicon-waveguide-based optical modulator that has been demonstrated experimentally has a modulation frequency of only ∼20 MHz (refs 10, 11), although it has been predicted theoretically that a ∼1-GHz modulation frequency might be achievable in some device structures12,13. Here we describe an approach based on a metal–oxide–semiconductor (MOS) capacitor structure embedded in a silicon waveguide that can produce high-speed optical phase modulation: we demonstrate an all-silicon optical modulator with a modulation bandwidth exceeding 1 GHz. As this technology is compatible with conventional complementary MOS (CMOS) processing, monolithic integration of the silicon modulator with advanced electronics on a single silicon substrate becomes possible.
TL;DR: In this article, the authors realized a graphene electro-optic modulator operating with a 30 GHz bandwidth and with a state-of-the-art modulation efficiency of 1.5 dB V−1, paving the way for fast digital communications.
Abstract: Scientists have realized a graphene electro-optic modulator operating with a 30 GHz bandwidth and with a state-of-the-art modulation efficiency of 1.5 dB V−1, paving the way for fast digital communications.
TL;DR: In this paper, the authors demonstrate a 70 GHz modulator in a 10-μm-long two-dimensionally localized gap-plasmon waveguide system, where the modulator can be used to achieve a 2.
Abstract: The authors demonstrate a 70 GHz modulator in a 10-μm-long two-dimensionally localized gap-plasmon waveguide system.