Differential mobility analyzer

Abstract: Mobility particle size spectrometers often referred to as DMPS (Differential Mobility Particle Sizers) or SMPS (Scanning Mobility Particle Sizers) have found a wide range of applications in atmospheric aerosol research. However, comparability of measurements conducted world-wide is hampered by lack of generally accepted technical standards and guidelines with respect to the instrumental set-up, measurement mode, data evaluation as well as quality control. Technical standards were developed for a minimum requirement of mobility size spectrometry to perform long-term atmospheric aerosol measurements. Technical recommendations include continuous monitoring of flow rates, temperature, pressure, and relative humidity for the sheath and sample air in the differential mobility analyzer. We compared commercial and custom-made inversion routines to calculate the particle number size distributions from the measured electrical mobility distribution. All inversion routines are comparable within few per cent uncertainty for a given set of raw data. Furthermore, this work summarizes the results from several instrument intercomparison workshops conducted within the European infrastructure project EUSAAR (European Supersites for Atmospheric Aerosol Research) and ACTRIS (Aerosols, Clouds, and Trace gases Research InfraStructure Network) to determine present uncertainties especially of custom-built mobility particle size spectrometers. Under controlled laboratory conditions, the particle number size distributions from 20 to 200 nm determined by mobility particle size spectrometers of different design are within an uncertainty range of around ±10% after correcting internal particle losses, while below and above this size range the discrepancies increased. For particles larger than 200 nm, the uncertainty range increased to 30%, which could not be explained. The network reference mobility spectrometers with identical design agreed within ±4% in the peak particle number concentration when all settings were done carefully. The consistency of these reference instruments to the total particle number concentration was demonstrated to be less than 5%. Additionally, a new data structure for particle number size distributions was introduced to store and disseminate the data at EMEP (European Monitoring and Evaluation Program). This structure contains three levels: raw data, processed data, and final particle size distributions. Importantly, we recommend reporting raw measurements including all relevant instrument parameters as well as a complete documentation on all data transformation and correction steps. These technical and data structure standards aim to enhance the quality of long-term size distribution measurements, their comparability between different networks and sites, and their transparency and traceability back to raw data. © Author(s) 2012.

Abstract: The hygroscopic properties play a vital role for the direct and indirect effects of aerosols on climate, as well as the health effects of particulate matter (PM) by modifying the deposition pattern of inhaled particles in the humid human respiratory tract. Hygroscopic Tandem Differential Mobility Analyzer (H-TDMA) instruments have been used in field campaigns in various environments globally over the last 25 yr to determine the water uptake on submicrometre particles at subsaturated conditions. These investigations have yielded valuable and comprehensive information regarding the particle hygroscopic properties of the atmospheric aerosol, including state of mixing. These properties determine the equilibrium particle size at ambient relative humidities and have successfully been used to calculate the activation of particles at water vapour supersaturation. This paper summarizes the existing published H-TDMA results on the size-resolved submicrometre aerosol particle hygroscopic properties obtained from ground-based measurements at multiple marine, rural, urban and free tropospheric measurement sites. The data is classified into groups of hygroscopic growth indicating the external mixture, and providing clues to the sources and processes controlling the aerosol. An evaluation is given on how different chemical and physical properties affect the hygroscopic growth.

Abstract: A dilution source sampling system is augmented to measure the size-distributed chemical composition of fine particle emissions from motor vehicles. Measurements are made using an optical particle counter (OPC), a differential mobility analyzer (DMA)/condensation nucleus counter (CNC) combination, and a pair of microorifice uniform deposit impactors (MOUDIs). The sources tested with this system include catalyst-equipped gasoline-powered light-duty vehicles, noncatalyst gasoline-powered light-duty vehicles, and medium-duty diesel trucks. Chemical composition analysis demonstrates that particles emitted from the gasoline-powered vehicles tested are largely composed of organic compounds while particles emitted from diesel engines contain roughly equal amounts of organic compounds and elemental carbon. The particle mass distributions from all mobile sources tested have a single mode that peaks at approximately 0.1−0.2 μm particle diameter. Of the two diesel vehicles tested, the vehicle with the lowest fine particle emissions rate released the largest number of ultrafine particles, a finding similar to that of Bagley et al. (Characterization of fuel and aftertreatment device effects on diesel emissions; Technical Report 76; Health Effects Institute: Cambridge, MA, 1996). Particle size distribution measurements taken throughout the FTP urban driving cycle used to test all of the vehicles described in this paper reveal that particulate mass emission rates and particulate size distributions from the vehicles tested here are similar during the cold start and hot start segments of the driving cycle.