CPU core voltage

Abstract: Sensing systems such as biomedical implants, infrastructure monitoring systems, and military surveillance units are constrained to consume only picowatts to nanowatts in standby and active mode, respectively. This tight power budget places ultra-low power demands on all building blocks in the systems. This work proposes a voltage reference for use in such ultra-low power systems, referred to as the 2T voltage reference, which has been demonstrated in silicon across three CMOS technologies. Prototype chips in 0.13 μm show a temperature coefficient of 16.9 ppm/°C (best) and line sensitivity of 0.033%/V, while consuming 2.22 pW in 1350 μm2. The lowest functional Vdd 0.5 V. The proposed design improves energy efficiency by 2 to 3 orders of magnitude while exhibiting better line sensitivity and temperature coefficient in less area, compared to other nanowatt voltage references. For process spread analysis, 49 dies are measured across two runs, showing the design exhibits comparable spreads in TC and output voltage to existing voltage references in the literature. Digital trimming is demonstrated, and assisted one temperature point digital trimming, guided by initial samples with two temperature point trimming, enables TC <; 50 ppm/°C and ±0.35% output precision across all 25 dies. Ease of technology portability is demonstrated with silicon measurement results in 65 nm, 0.13 μm, and 0.18 μm CMOS technologies.

Abstract: Dynamic frequency and voltage scaling features have been introduced to manage ever-growing heat and power consumption in modern processors. Design restrictions ensure frequency and voltage are adjusted as a pair, based on the current load, because for each frequency there is only a certain voltage range where the processor can operate correctly. For this purpose, many processors (including the widespread Intel Core series) expose privileged software interfaces to dynamically regulate processor frequency and operating voltage.In this paper, we demonstrate that these privileged interfaces can be reliably exploited to undermine the system’s security. We present the Plundervolt attack, in which a privileged software adversary abuses an undocumented Intel Core voltage scaling interface to corrupt the integrity of Intel SGX enclave computations. Plundervolt carefully controls the processor’s supply voltage during an enclave computation, inducing predictable faults within the processor package. Consequently, even Intel SGX’s memory encryption/authentication technology cannot protect against Plundervolt. In multiple case studies, we show how the induced faults in enclave computations can be leveraged in real-world attacks to recover keys from cryptographic algorithms (including the AES-NI instruction set extension) or to induce memory safety vulnerabilities into bug-free enclave code. We finally discuss why mitigating Plundervolt is not trivial, requiring trusted computing base recovery through microcode updates or hardware changes.

Abstract: The trading of speed for low power consumption in CMOS VLSI by using the supply voltage and the threshold voltage as variables was investigated. It is shown that it is desirable to minimize the supply voltage for minimizing the power consumption. The lower bound of the supply voltage and the possible decrease in power consumption without speed loss were investigated under different circuit constraints, and the consequences for circuit performance were calculated. Results show, for example, that power reductions of about 40 times can be obtained without speed loss by using supply voltages down to about 0.48 V. >

Abstract: This paper presents an intra-process dynamic voltage and frequency scaling (DVFS) technique targeted toward non real-time applications running on an embedded system platform. The key idea is to make use of runtime information about the external memory access statistics in order to perform CPU voltage and frequency scaling with the goal of minimizing the energy consumption while translucently controlling the performance penalty. The proposed DVFS technique relies on dynamically-constructed regression models that allow the CPU to calculate the expected workload and slack time for the next time slot, and thus, adjust its voltage and frequency in order to save energy while meeting soft timing constraints. This is in turn achieved by estimating and exploiting the ratio of the total off-chip access time to the total on-chip computation time. The proposed technique has been implemented on an XScale-based embedded system platform and actual energy savings have been calculated by current measurements in hardware. For memory-bound programs, a CPU energy saving of more than 70% with a performance degradation of 12% was achieved. For CPU-bound programs, 15/spl sim/60% CPU energy saving was achieved at the cost of 5-20% performance penalty.