Control register

Abstract: Processor architectures with tens to hundreds of arithmetic units are emerging to handle media processing applications. These applications, such as image coding, image synthesis and image understanding, require arithmetic rates of up to 10/sup 11/ operations per second. As the number of arithmetic units in a processor increases to meet these demands, register storage and communication between the arithmetic units dominate the area, delay and power of the arithmetic units. In this paper, we show that partitioning the register file along three axes reduces the cost of register storage and communication without significantly impacting performance. We develop a taxonomy of register architectures by partitioning across the data-parallel, instruction-level-parallel and memory-hierarchy axes, and by optimizing the hierarchical register organization for operation on streams of data. Compared to a centralized global register file, the most compact of these organizations reduces the register file area, delay and power dissipation of a media processor by factors of 195, 230 and 430 respectively. This reduction in cost is achieved with a performance degradation of only 8% on a representative set of media processing benchmarks.

Abstract: A system and method for performing computer processing operations in a data processing system includes a multithreaded processor and thread switch logic. The multithreaded processor is capable of switching between two or more threads of instructions which can be independently executed. Each thread has a corresponding state in a thread state register depending on its execution status. The thread switch logic contains a thread switch control register to store the conditions upon which a thread switch will occur. The thread switch logic has a time-out register which forces a thread switch when execution of the active thread in the multithreaded processor exceeds a programmable period of time. Thread switch logic also has a forward progress count register to prevent repetitive unproductive thread switching between threads in the multithreaded processor. Thread switch logic also is responsive to a software manager capable of changing the priority of the different threads and thus superseding thread switch events.

Abstract: An improved flash EEPROM memory-based storage subsystem includes one or more flash memory arrays, each with three data registers and a controller circuit. During a flash program operation, one data register is used to control the program operation, a second register is used to hold the target data value, and a third register is used to load the next sector's data. Subsequent to a flash program operation, a sector's data are read from a flash array into the first data register and compared to the target data stored in the second register. When the data is verified good, the data from the third register is copied into the first and second registers for the next program operation. This creates an improved performance system that doesn't suffer data transfer latency during program operations that require data verification after the program operation is complete. Alternate embodiments perform the comparison using two register implementations and a single register implementations. The post-writer verification can be repeated and use different bias conditions for reading the data. The process can be automatic or executed by command that can specify the read conditions.

Abstract: A system and method for performing computer processing operations in a data processing system includes a multithreaded processor (110) and thread switch logic (400) The multithreaded processor (110) is capable of switching between two or more threads of instructions which can be independently executed Each thread has a corresponding state in a thread state register (440) depending on its execution status The thread switch logic contains a thread switch control register (410) to store the conditions upon which a thread switch can occur Upon the occurrence of a thread switch event, the state and priority of all threads are dynamically interrogated to determine which thread should be the active thread executing the processor The thread switch logic has a time-out register (430) which forces a thread switch when execution of the active thread in the multithreaded processor exceeds a programmable period of time Thread switch logic also has a forward progress count register (420) to prevent repetitive unproductive thread switching between threads in the multithreaded processor Thread switch logic also is responsive to a thread switch manager (460) capable of changing the priority of the different threads and thus superseding thread switch events