About: Brightness temperature is a research topic. Over the lifetime, 3249 publications have been published within this topic receiving 69841 citations.
TL;DR: In this paper, a two-layer model of turbulent exchange that includes the view geometry associated with directional radiometric surface temperature is developed and evaluated by comparison of model predictions with field measurements.
TL;DR: Based on thermal radiance transfer equation, an attempt has been made in this paper to develop a mono-window algorithm for retrieving land surface temperature (LST) from Landsat TM6 data.
Abstract: Remote sensing of land surface temperature (LST) from the thermal band data of Landsat Thematic Mapper (TM) still remains unused in comparison with the extensive studies of its visible and near-infrared (NIR) bands for various applications. The brightness temperature can be computed from the digital number (DN) of TM6 data using the equation provided by the National Aeronautics and Space Administration (NASA). However, a proper algorithm for retrieving LST from the only one thermal band of the sensor still remains unavailable due to many difficulties in the atmospheric correction. Based on thermal radiance transfer equation, an attempt has been made in the paper to develop a mono-window algorithm for retrieving LST from Landsat TM6 data. Three parameters are required for the algorithm: emissivity, transmittance and effective mean atmospheric temperature. Method about determination of atmospheric transmittance is given in the paper through the simulation of atmospheric conditions with LOWTRAN 7 program. A ...
TL;DR: In this article, the dielectric constant of sea water has been measured at S-band and L-band with a quoted uncertainty of tenths of a percent, and expressions are developed which will yield computations of brightness temperature having an error of no more than 0.3 K for an undisturbed sea at frequencies lower than X-band.
Abstract: The advent of precision microwave radiometry has placed a stringent requirement on the accuracy with which the dielectric constant of sea water must be known. To this end, measurements of the dielectric constant have been conducted at S -band and L -band with a quoted uncertainty of tenths of a percent. These and earlier results are critically examined, and expressions are developed which will yield computations of brightness temperature having an error of no more than 0.3 K for an undisturbed sea at frequencies lower than X -band. At the higher microwave and millimeter wave frequencies, the accuracy is in question because of uncertainties in the relaxation time and the dielectric constant at infinite frequency.
TL;DR: In this article, the authors present an operational two-source (soil+vegetation) model for evaluating the surface energy balance given measurements of the time rate of change in radiometric surface temperature (TRAD) during the morning hours.
TL;DR: The methodology uses a radiative transfer model to solve for surface soil moisture and vegetation optical depth simultaneously using a nonlinear iterative optimization procedure and does not require any field observations of soil moisture or canopy biophysical properties for calibration purposes and may be applied to other wavelengths.
Abstract: A methodology for retrieving surface soil moisture and vegetation optical depth from satellite microwave radiometer data is presented. The procedure is tested with historical 6.6 GHz H and V polarized brightness temperature observations from the scanning multichannel microwave radiometer (SMMR) over several test sites in Illinois. Results using only nighttime data are presented at this time due to the greater stability of nighttime surface temperature estimation. The methodology uses a radiative transfer model to solve for surface soil moisture and vegetation optical depth simultaneously using a nonlinear iterative optimization procedure. It assumes known constant values for the scattering albedo and roughness, and that vegetation optical depth for H-polarization is the same as for V-polarization. Surface temperature is derived by a procedure using high frequency V-polarized brightness temperatures. The methodology does not require any field observations of soil moisture or canopy biophysical properties for calibration purposes and may be applied to other wavelengths. Results compare well with field observations of soil moisture and satellite-derived vegetation index data from optical sensors.