Bluff

Abstract: When placed ih a fluid stream, some bodies generate separated flow over a substantial proportion of their surface and hence can be classified as bluff. On sharp-edged bluff bodies, separation is fixed at the salient edges, whereas on bluff bodies with continuous surface curvature the location of separation depends both on the shape of the body and the state of the boundary layer. At low Reynolds numbers, when separation first occurs, the flow around a bluff body remains stable, but as the Reynolds number is increased a critical value is reached beyond which instabilities develop. These instabilities can lead to organized unsteady wake motion, dis­ organized motion, or a combination of both. Regular vortex shedding, the subject of this article, is a dominant feature of two-dimensional bluff-body wakes and is present irrespective of whether the separating boundary layers are laminar or turbulent. It has been the subject of research for more than a century, and many hundreds of papers have been written. In recent years vortex shedding has been the topic of Euromech meetings reported on by Mair & Maull (1971) and Bearman & Graham (1980), and a comprehensive review has been undertaken by Berger & Wille (1972). Vortex shedding and general wake turbulence induce fluctuating pres­ sures on the surface of the generating bluff body, and if the body is flexible this can cause oscillations. Oscillations excited by vortex shedding are usually in a direction normal to that of the free stream, and amplitudes as large as 1.5 to 2 body diameters may be recorded. In addition to the generating body, any other bodies in its wake may be forced into oscillation. Broad-band force fluctuations, induced by turbulence produced in the flow around a bluff body, rarely lead to oscillations as severe as those caused by vortex shedding. Some form of aerodynamic instability, such that move-