TL;DR: In this paper, the uncertainties in an aircraft-based mass balance approach for quantifying carbon dioxide and methane emissions from an urban environment, focusing on Indianapolis, IN, USA, are described.
Abstract: . Urban environments are the primary contributors to global anthropogenic carbon emissions. Because much of the growth in CO2 emissions will originate from cities, there is a need to develop, assess, and improve measurement and modeling strategies for quantifying and monitoring greenhouse gas emissions from large urban centers. In this study the uncertainties in an aircraft-based mass balance approach for quantifying carbon dioxide and methane emissions from an urban environment, focusing on Indianapolis, IN, USA, are described. The relatively level terrain of Indianapolis facilitated the application of mean wind fields in the mass balance approach. We investigate the uncertainties in our aircraft-based mass balance approach by (1) assessing the sensitivity of the measured flux to important measurement and analysis parameters including wind speed, background CO2 and CH4, boundary layer depth, and interpolation technique, and (2) determining the flux at two or more downwind distances from a point or area source (with relatively large source strengths such as solid waste facilities and a power generating station) in rapid succession, assuming that the emission flux is constant. When we quantify the precision in the approach by comparing the estimated emissions derived from measurements at two or more downwind distances from an area or point source, we find that the minimum and maximum repeatability were 12 and 52%, with an average of 31%. We suggest that improvements in the experimental design can be achieved by careful determination of the background concentration, monitoring the evolution of the boundary layer through the measurement period, and increasing the number of downwind horizontal transect measurements at multiple altitudes within the boundary layer.
TL;DR: A generalized analytical transient, one-, two-, and/or three-dimensional (AT123D) computer code is developed for estimating the transport of wastes in a groundwater aquifer system as discussed by the authors.
Abstract: A generalized analytical transient, one-, two-, and/or three-dimensional (AT123D) computer code is developed for estimating the transport of wastes in a groundwater aquifer system. It contains 450 options: 288 for the three-dimensional case, 72 for the two-dimensional case in the x-y plane, 73 for the two-dimensional case in the x-z plane, and 18 for the one-dimensional case in the longitudinal direction. These are the combinations of three types of wastes, eight sets of source configurations, three kinds of source releases, and four variations of the aquifer dimensions. Three types of the wastes are radioactive waste, chemicals, and heat. The eight types of source configurations are a point source, a line source parallel to the x-axis, a line source parallel to the y-axis, a line source parallel to the z-axis, an area source perpendicular to the x-axis, an area source perpendicular to the y-axis, an area source perpendicular to the z-axis, and a volume source. Three kinds of source releases are instantaneous, continuous, and finite duration releases. Four variations of the aquifer dimensions are finite depth and finite width, finite depth and infinite width, infinite depth and finite width, and infinite depth and infinite width. The mechanisms of transport included inmore » the analysis are advection, hydrodynamic dispersion, adsorption, decay/degeneration, and waste losses to the atmosphere. Boundary conditions included Dirichlet, Neumann, mixed type, and/or radiation boundaries. Fifty sample cases are provided to illustrate the application of AT1230 to various situations.« less
TL;DR: In this article, a simple area source formula X = c Q/u where X is air pollution concentration, Q is source strength per unit area, and u is average wind speed, is studied.
TL;DR: In this paper, a two-dimensional mathematical model is presented to study the dispersion of air pollutants under the effect of urban heat island (UHI), when the pollutants are assumed to be emitted from the ground-based area source.
TL;DR: In this article, a simple but physically realistic model is shown to be adequate for estimating pollutant concentrations due to area sources in cities, where the surface concentration is directly proportional to the local area source strength and inversely proportional to wind speed.
Abstract: A simple but physically realistic model is shown to be adequate for estimating pollutant concentrations due to area sources in cities. In this model, the surface concentration is directly proportional to the local area source strength and inversely proportional to the wind speed. The model performs nearly as well as much more complex models that require the use of digital computers.