Abstract: Plasmonic metal nanostructures have been incorporated into semiconductors to enhance the solar-light harvesting and the energy-conversion efficiency. So far the mechanism of energy transfer from the plasmonic metal to semiconductors remains unclear. Herein the underlying plasmonic energy-transfer mechanism is unambiguously determined in Au@SiO2@Cu2O sandwich nanostructures by transient-absorption and photocatalysis action spectrum measurement. The gold core converts the energy of incident photons into localized surface plasmon resonance oscillations and transfers the plasmonic energy to the Cu2O semiconductor shell via resonant energy transfer (RET). RET generates electron–hole pairs in the semiconductor by the dipole–dipole interaction between the plasmonic metal (donor) and semiconductor (acceptor), which greatly enhances the visible-light photocatalytic activity as compared to the semiconductor alone. RET from a plasmonic metal to a semiconductor is a viable and efficient mechanism that can be used to ...

Abstract: Materials exhibiting a spontaneous electrical polarization that can be switched easily between antiparallel orientations are of potential value for sensors, photonics and energy-efficient memories. In this context, organic ferroelectrics are of particular interest because they promise to be lightweight, inexpensive and easily processed into devices. A recently identified family of organic ferroelectric structures is based on intermolecular charge transfer, where donor and acceptor molecules co-crystallize in an alternating fashion known as a mixed stack: in the crystalline lattice, a collective transfer of electrons from donor to acceptor molecules results in the formation of dipoles that can be realigned by an external field as molecules switch partners in the mixed stack. Although mixed stacks have been investigated extensively, only three systems are known to show ferroelectric switching, all below 71 kelvin. Here we describe supramolecular charge-transfer networks that undergo ferroelectric polarization switching with a ferroelectric Curie temperature above room temperature. These polar and switchable systems utilize a structural synergy between a hydrogen-bonded network and charge-transfer complexation of donor and acceptor molecules in a mixed stack. This supramolecular motif could help guide the development of other functional organic systems that can switch polarization under the influence of electric fields at ambient temperatures.

Abstract: Two donor-π-acceptor (D-π-A) dyes are synthesized for application in dye- sensitized solar cells (DSSC). These D-π-A sensitizers use triphenylamine as donor, oligothiophene as both donor and π-bridge, and benzothiadiazole (BTDA)/cyanoacrylic acid as acceptor that can be anchored to the TiO2 sur- face. Tuning of the optical and electrochemical properties is observed by the insertion of a phenyl ring between the BTDA and cyanoacrylic acid acceptor units. Density functional theory (DFT) calculations of these sensitizers provide further insight into the molecular geometry and the impact of the additional phenyl group on the photophysical and photovoltaic performance. These dyes are investigated as sensitizers in liquid-electrolyte-based dye-sensitized solar cells. The insertion of an additional phenyl ring shows significant influence on the solar cells’ performance leading to an over 6.5 times higher efficiency (η = 8.21%) in DSSCs compared to the sensitizer without phenyl unit (η = 1.24%). Photophysical investigations reveal that the insertion of the phenyl ring blocks the back electron transfer of the charge separated state, thus slowing down recombination processes by over 5 times, while maintaining efficient electron injection from the excited dye into the TiO2-photoanode.

Abstract: We explore the photophysics of P(NDI2OD-T2), a high-mobility and air-stable n-type donor/acceptor polymer. Detailed steady-state UV-vis and photoluminescence (PL) measurements on solutions of P(NDI2OD-T2) reveal distinct signatures of aggregation. By performing quantum chemical calculations, we can assign these spectral features to unaggregated and stacked polymer chains. NMR measurements independently confirm the aggregation phenomena of P(NDI2OD-T2) in solution. The detailed analysis of the optical spectra shows that aggregation is a two-step process with different types of aggregates, which we confirm by time-dependent PL measurements. Analytical ultracentrifugation measurements suggest that aggregation takes place within the single polymer chain upon coiling. By transferring these results to thin P(NDI2OD-T2) films, we can conclude that film formation is mainly governed by the chain collapse, leading in general to a high aggregate content of ~45%. This process also inhibits the formation of amorphous and disordered P(NDI2OD-T2) films.

Abstract: We have designed and synthesized a high-efficiency purely organic luminescent material, 2,4-bis{3-(9 H-carbazol-9-yl)-9 H-carbazol-9-yl}-6-phenyl-1,3,5-triazine (CC2TA) comprising the bicarbazole donor and phenyltriazine acceptor units, which is capable of emitting thermally activated delayed fluorescence. The molecular design of CC2TA allows spatial separation of HOMO and LUMO on the donor and acceptor fragments, respectively, leading to an exceptionally small singlet–triplet exchange energy (ΔEST = 0.06 eV) together with a high triplet energy. Furthermore, a high external electroluminescence quantum efficiency as high as 11% ± 1% has been achieved in the sky-blue organic light-emitting diodes employing CC2TA as an emitter.

Abstract: The anisotropy inherent to many planar organic molecules leads to a high sensitivity of various fundamental processes to the orientation of molecules within films and at heterojunctions. Such processes include absorption, charge and exciton transport, energy levels, and charge transfer, all of which are critical to organic solar cell operation. Here,an in-depth study of bilayer cells consisting of a donor/acceptor interface between zinc phthalocyanine (ZnPc) and fullerene (C60) is conducted and devices with the typically deposited standing up (edge-on) orientation are compared to those with ZnPc lying flat (face-on). The face-on ZnPc-based device allows for an increase in all solar cell parameters, substantially increasing power conversion efficiency from 1.5% to 2.8%. Spectrally resolved photocurrent measurements reveal a >50% increase in ZnPc signal, from which only 12% is accounted for by the increase in absorption associated with the face-on orientation. The increase in internal quantum efficiency is accounted for via an improved charge transfer. The results of this study indicate that proper consideration of the orientation between donor and acceptor needs to be taken in order to fully optimize the numerous processes required for photovoltaic energy conversion.

Abstract: The authors present efficient all-polymer solar cells comprising two different low-bandgap naphthalenediimide (NDI)-based copolymers as acceptors and regioregular P3HT as the donor. It is shown that these naphthalene copolymers have a strong tendency to preaggregate in specific organic solvents, and that preaggregation can be completely suppressed when using suitable solvents with large and highly polarizable aromatic cores. Organic solar cells prepared from such nonaggregated polymer solutions show dramatically increased power conversion efficiencies of up to 1.4%, which is mainly due to a large increase of the short circuit current. In addition, optimized solar cells show remarkable high fill factors of up to 70%. The analysis of the blend absorbance spectra reveals a surprising anticorrelation between the degree of polymer aggregation in the solid P3HT:NDI copolymer blends and their photovoltaic performance. Scanning near-field optical microscopy (SNOM) and atomic force microscopy (AFM) measurements reveal important information on the blend morphology. It is shown that films with high degree of aggregation and low photocurrents exhibit large-scale phase-separation into rather pure donor and acceptor domains. It is proposed that, by suppressing the aggregation of NDI copolymers at the early stage of film formation, the intermixing of the donor and acceptor component is improved, thereby allowing efficient harvesting of photogenerated excitons at the donor–acceptor heterojunction.

Abstract: We examine the correlations of the dipole moment and conformational stability to the self-assembly and solar cell performance within a series of isomorphic, solution-processable molecules. These charge-transfer chromophores are described by a D1-A-D-A-D1 structure comprising electron-rich 2-hexylbithiophene and 3,3′-di-2-ethylhexylsilylene-2,2′-bithiophene moieties as the donor units D1 and D, respectively. The building blocks 2,1,3-benzothiadiazole (BT) and [1,2,5]thiadiazolo[3,4-c]pyridine (PT) were used as the electron-deficient acceptor units A. Using a combination of UV–visible spectroscopy, field-effect transistors, solar cell devices, grazing incident wide-angle X-ray scattering, and transmission electron microscopy, three PT-containing compounds (1–3) with varying regiochemistry and symmetry, together with the BT-based compound 5,5′-bis{(4-(7-hexylthiophen-2-yl)thiophen-2-yl)-[1,2,5]thiadiazolobenzene}-3,3′-di-2-ethylhexylsilylene-2,2′-bithiophene (4), are compared and contrasted in solution, in t...

Abstract: Herein we report the synthesis and characterization of a series of 6,12-diarylindeno[1,2-b]fluorenes (IFs). Functionalization with electron donor and acceptor groups influences the ability of the IF scaffold to undergo two-electron oxidation and reduction to yield the corresponding 18- and 22-π-electron species, respectively. A single crystal of the pentafluorophenyl-substituted IF can serve as an active layer in an organic field-effect transistor (OFET). The important finding is that the single-crystal OFET yields an ambipolar device that is able to transport holes and electrons.

Abstract: We herein report the first instance of aqueous-phase photosensitization of semiconductor photocatalysts (WO3 loaded with Pt) through triplet–triplet annihilation (TTA)-based upconversion of sub-band-gap photons. The TTA-based upconversion (UC) was achieved in the aqueous phase by encapsulating the solvent phase containing a benchmark platinum(II) octaethylporphyrin/9,10-diphenylanthracene sensitizer/acceptor pair in a rigid polymer shell in the form of aqueous dispersible microcapsules. A mixture of hexadecane and polyisobutylene was used as the inner solvent phase. This eliminated the need for the deoxygenation step that is essential for existing TTA-based UC processes and enabled stable UC to occur even after a month of exposure to the ambient environment. The photoluminescence properties were examined, and UC-assisted photochemical production of hydroxyl radical from green (532 nm) light irradiation was demonstrated for the first time.

Abstract: Covalent organic frameworks (COFs) are crystalline polygons with permanent porosity that have potential application in gas adsorption and storage. [ 1–14 ] π -Electronic versions have also been prepared, by integrating aromatic building blocks into the polygon skeletons. [ 15–25 ] The unusual two-dimensional (2D) conformation endows the frameworks with crystallized layer structures, which could set π -components in face-to-face stacked columns and provide aligned conduction pathways. [ 19–27 ] It is highly interesting and remains a challenge if the unique 2D COF architecture can be explored for the construction of highly aligned donor (D) and acceptor (A) systems. The crystallization of electron donors (D) and acceptors (A) into macroscopic heterojunctions with segregated D and A

Abstract: We investigate the properties of Mg acceptors in nitride semiconductors with hybrid functional calculations. We find that although the thermodynamic transition level is relatively close to the valence band in GaN (260 meV), Mg(Ga) exhibits key features of a deep acceptor: the hole is localized on a N atom neighboring the Mg impurity, inducing a large local lattice distortion and giving rise to broad blue luminescence. We show that the ultraviolet photoluminescence peak attributed to Mg acceptors in GaN is likely related to Mg-H complexes, explaining the results of photoluminescence and electron paramagnetic resonance experiments. Predictions for Mg acceptors in AlN and InN are also presented.

Abstract: We study the appearance and energy of the charge transfer (CT) state using measurements of electroluminescence (EL) and photoluminescence (PL) in blend films of high-performance polymers with fullerene acceptors. EL spectroscopy provides a direct probe of the energy of the interfacial states without the need to rely on the LUMO and HOMO energies as estimated in pristine materials. For each polymer, we use different fullerenes with varying LUMO levels as electron acceptors, in order to vary the energy of the CT state relative to the blend with [6,6]-phenyl C61-butyric acid methyl ester (PCBM). As the energy of the CT state emission approaches the absorption onset of the blend component with the smaller optical bandgap, Eopt,min ≡ min{Eopt,donor; Eopt,acceptor}, we observe a transition in the EL spectrum from CT emission to singlet emission from the component with the smaller bandgap. The appearance of component singlet emission coincides with reduced photocurrent and fill factor. We conclude that the open ...

Abstract: Ferroelectric polarization of 6.3 μC cm(-2) is induced by the neutral-to-ionic transition, upon which nonpolar molecules of electron donor tetrathiafulvalene (TTF) and acceptor p-chloranil (CA) are incompletely ionized to ±0.60e and dimerized along the molecular stacking chain. We find that the ferroelectric properties are governed by intermolecular charge transfer rather than simple displacement of static point charge on molecules. The observed polarization and poling effect on the absolute structural configuration can be interpreted in terms of electronic ferroelectricity, which not only exhibits antiparallel polarity to the ionic displacement but also enhances the polarization more than 20 times that of the point-charge model.

Abstract: Molecular systems where several apparently equivalent charge separation pathways exist upon photoexcitation are presented. They encompass MQn (n≥2) architectures, where M is a chromophore and Q an electron transfer quencher (either donor or acceptor), and M–M systems where M acts as both electron donor and acceptor. In all cases, charge separation involves symmetry breaking. The conditions for such process to be operative as well as the origin of the symmetry breaking are discussed.

Abstract: A series of conjugated donor (D)-π-acceptor (A) copolymers, P(BDT-F-BT), P(BDT-T-BT), and P(BDT-TT-BT), based on benzodithiophene (BDT) donor unit and benzothiadiazole (BT) acceptor unit with different π-bridges, were designed and synthesized via a Pd-catalyzed Stille-coupling method. The π-bridges between the BDT donor unit and BT acceptor unit are furan (F) in P(BDT-F-BT), thiophene (T) in P(BDT-T-BT) and thieno[3,2-b]thiophene (TT) in P(BDT-TT-BT). It was found that the π-bridges significantly affect the molecular architecture and optoelectronic properties of the copolymers. With the π-bridge varied from furan to thiophene, then to thieno[3,2-b]thiophene, the shape of the molecular chains changed from z-shaped to almost straight line gradually. Band gaps of P(BDT-F-BT), P(BDT-T-BT) and P(BDT-TT-BT) were tuned from 1.96 to 1.82 to 1.78 eV with HOMO levels up-shifted from −5.44 to −5.35 to −5.21 eV, respectively. Bulk heterojunction solar cells with the polymers as donor and PC71BM as acceptor demonstrat...

Abstract: Four organic D-A-π-A-featured sensitizers (TQ1, TQ2, IQ1, and IQ2) have been studied for high-efficiency dye-sensitized solar cells (DSSCs). We employed an indoline or a triphenylamine unit as the donor, cyanoacetic acid as the acceptor/anchor, and a thiophene moiety as the conjugation bridge. Additionally, an electron-withdrawing quinoxaline unit was incorporated between the donor and the π-conjugation unit. These sensitizers show an additional absorption band covering the broad visible range in solution. The contribution from the incorporated quinoxaline was investigated theoretically by using DFT and time-dependent DFT. The incorporated low-band-gap quinoxaline unit as an auxiliary acceptor has several merits, such as decreasing the band gap, optimizing the energy levels, and realizing a facile structural modification on several positions in the quinoxaline unit. As demonstrated, the observed additional absorption band is favorable to the photon-to-electron conversion because it corresponds to the efficient electron transitions to the LUMO orbital. Electrochemical impedance spectroscopy (EIS) Bode plots reveal that the replacement of a methoxy group with an octyloxy group can increase the injection electron lifetime by a factor of 2.4. IQ2 and TQ2 can perform well without any co-adsorbent, successfully suppress the charge recombination from TiO(2) conduction band to I(3)(-) in the electrolyte, and enhance the electron lifetime, resulting in a decreased dark current and enhanced open circuit voltage (V(oc)) values. By using a liquid electrolyte, DSSCs based on dye IQ2 exhibited a broad incident photon-to-current conversion efficiency (IPCE) action spectrum and high efficiency (η=8.50 %) with a short circuit current density (J(sc)) of 15.65 mA cm(-2), a V(oc) value of 776 mV, a fill factor (FF) of 0.70 under AM 1.5 illumination (100 mW cm(-2)). Moreover, the overall efficiency remained at 97% of the initial value after 1000 h of visible-light soaking.

Abstract: The incorporation of Fe as a dopant in anatase TiO2 nanoparticles has been systematically investigated with the aim of changing the coordination geometry of Ti via the formation of oxygen vacancies. Although Fe3+ ions are present in the solution during growth of the nanoparticles, a high-temperature heat treatment is found to be necessary to incorporate Fe3+ as a substituent for Ti4+ in the bulk of the TiO2 nanoparticles. The Fe3+ acceptors are found to be charge-compensated by oxygen vacancies, up to dopant concentrations as high as 10%. The surprisingly high solubility of Fe is attributed to the very similar radii of Ti4+ and Fe3+ and to the energetically favorable Coulomb attraction between the negatively charged Fe acceptor and the positively charged oxygen vacancies. A combined EXAFS/XANES study reveals that part of the Ti4+ ions changes their coordination number from 6 to 4 at high oxygen vacancy concentrations. The deliberate use of oxygen vacancies to modify the coordination geometry of metal ions...

Abstract: It is normally assumed that electrons and holes in organic solar cells are generated by the dissociation of excitons at the interface between donor and acceptor materials in strongly bound hole-electron pairs. We show in this contribution that excitons can dissociate tens of angstroms away from the interface and generate partially separated electrons and holes, which can more easily overcome their coulombic attraction and form free charges. We first establish under what conditions long-range exciton dissociation is likely (using a kinetic model and a microscopic model for the calculation of the long-range electron transfer rate). Then, defining a rather general model Hamiltonian for the donor material, we show that the phenomenon is extremely common in the majority of polymer:fullerene bulk heterojunction solar cells.

Abstract: 4-bromoanisole is used as a very versatile processing additive to control the phase separation and phase purity of organic photovoltaic devices. Polymer-polymer blends based on P3HT as donor and a wide range of acceptor materials (F8TBT, PCDTBT,…) are investigated. The additive promotes the aggregation of P3HT which improves the morphology for both initially mixed and demixed blends.

Abstract: First-principles computer simulations can contribute to a deeper understanding of the dye/semiconductor interface lying at the heart of Dye-sensitized Solar Cells (DSCs). Here, we present the results of simulation of dye adsorption onto TiO(2) surfaces, and of their implications for the functioning of the corresponding solar cells. We propose an integrated strategy which combines FT-IR measurements with DFT calculations to individuate the energetically favorable TiO(2) adsorption mode of acetic acid, as a meaningful model for realistic organic dyes. Although we found a sizable variability in the relative stability of the considered adsorption modes with the model system and the method, a bridged bidentate structure was found to closely match the FT-IR frequency pattern, also being calculated as the most stable adsorption mode by calculations in solution. This adsorption mode was found to be the most stable binding also for realistic organic dyes bearing cyanoacrylic anchoring groups, while for a rhodanine-3-acetic acid anchoring group, an undissociated monodentate adsorption mode was found to be of comparable stability. The structural differences induced by the different anchoring groups were related to the different electron injection/recombination with oxidized dye properties which were experimentally assessed for the two classes of dyes. A stronger coupling and a possibly faster electron injection were also calculated for the bridged bidentate mode. We then investigated the adsorption mode and I(2) binding of prototype organic dyes. Car-Parrinello molecular dynamics and geometry optimizations were performed for two coumarin dyes differing by the length of the π-bridge separating the donor and acceptor moieties. We related the decreasing distance of the carbonylic oxygen from the titania to an increased I(2) concentration in proximity of the oxide surface, which might account for the different observed photovoltaic performances. The interplay between theory/simulation and experiments appears to be the key to further DSCs progress, both concerning the design of new dye sensitizers and their interaction with the semiconductor and with the solution environment and/or an electrolyte upon adsorption onto the semiconductor.

Abstract: A series of organic sensitizers with the direct electron injection mechanism and a high molar extinction coefficient comprising double donors, a π-spacer, and anchoring acceptor groups (D–D−π–A type) were synthesized and characterized by experimental and theoretical methods for dye-sensitized solar cells. (E)-2-Cyano-3-(5″-(4-((4-(3,6-di-tert-butylcarbazol-9-yl)phenyl)dodecylamino)phenyl)-[2,2′:5′,2″-terthiophene]-5-yl)acrylic acid showed performance with a maximal incident photon to electron conversion efficiency of 83%, Jsc value of 10.89 mA cm–2, Voc value of 0.70 V, and fill factor of 0.67, which correspond to an overall conversion efficiency of 5.12% under AM 1.5G illumination. The molecular geometry, electronic structure, and excited states were investigated with density functional theory, time-dependent density functional theory, and the symmetry-adapted cluster-configuration interaction method. The double donor moieties not only contribute to enhancement of the electron-donating ability, but also ...

Abstract: By combining results from positron annihilation and photoluminescence spectroscopy with data from Hall effect measurements, the characteristic deep level emission centered at ! 1.75 eV and exhibiting an activation energy of thermal quenching of 11.5 meV is associated with the zinc vacancy. Further, a strong indication that oxygen interstitials act as a dominating acceptor is derived from the analysis of charge carrier losses induced by electron irradiation with variable energy below and above the threshold for Zn-atom displacement. We also demonstrate that the commonly observed green emission is related to an extrinsic acceptorlike impurity, which may be readily passivated by oxygen vacancies.

Abstract: We report on the comparison of the electronic and photophysical properties of a series of related donor–acceptor–donor oligomers incorporating the previously known 2H-benzo[d][1,2,3]triazole (BTz) moiety as the acceptor and the recently reported BTzTD acceptor, a hybrid of BTz and 2,1,3-benzothiadiazole (BTD). Although often implied in the polymer literature that BTz has good acceptor character, we show that this moiety is best described as a weak acceptor. We present electrochemical, computational, and photophysical evidence supporting our assertion that BTzTD is a strong electron acceptor while maintaining the alkylation ability of the BTz moiety. Our results show that the identity of the central atom (N or S) in the benzo-fused heterocyclic ring plays an important role in both the electron-accepting and the electron-donating ability of acceptor moieties with sulfur imparting a greater electron-accepting ability and nitrogen affording greater electron-donating character. We report on the X-ray crystal s...

Abstract: We investigate the properties of Mg acceptors in nitride semiconductors with hybrid functional calculations. We find that although the thermodynamic transition level is relatively close to the valence band in GaN (260 meV), Mg(Ga) exhibits key features of a deep acceptor: the hole is localized on a N atom neighboring the Mg impurity, inducing a large local lattice distortion and giving rise to broad blue luminescence. We show that the ultraviolet photoluminescence peak attributed to Mg acceptors in GaN is likely related to Mg-H complexes, explaining the results of photoluminescence and electron paramagnetic resonance experiments. Predictions for Mg acceptors in AlN and InN are also presented.

Abstract: The effective absorption cross-section of a molecule (acceptor) can be greatly increased by associating it with a cluster of molecules that absorb light and transfer the excitation energy to the acceptor molecule. The basic mechanism of such light harvesting by Forster resonance energy transfer (FRET) is well established, but recent experiments have revealed a new feature whereby excitation is coherently shared among donor and acceptor molecules during FRET. In the present study, two-dimensional electronic spectroscopy was used to examine energy transfer at ambient temperature in a naturally occurring light-harvesting protein (PE545 of the marine cryptophyte alga Rhodomonas sp. strain CS24). Quantum beating was observed across a range of excitation frequencies. The shapes of those features in the two-dimensional spectra were examined. Through simulations, we show that two-dimensional electronic spectroscopy provides a probe of the adiabaticity of the free energy landscape underlying light harvesting.