The role of recrystallization and grain growth in optimizing the sheet texture of magnesium alloys with calcium addition during annealing
53
TL;DR: In this paper, the contribution of recrystallization and grain growth to the texture evolution in AZ31 alloy and a modified version AZ31+0.5 wt. was investigated utilizing a multi-step annealing process.
read more
About: This article is published in Journal of Magnesium and Alloys. The article was published on 01 Mar 2020. and is currently open access. The article focuses on the topics: Recrystallization (metallurgy) & Grain growth.
read more
Chat with Paper
AI Agents for this Paper
Find similar papers on Google Scholar, PubMed and Arxiv
Write a critical review of this paper
Analyze citations of this paper to find unaddressed research gaps
Citations
Recent Developments in Magnesium Metal–Matrix Composites for Biomedical Applications: A Review
TL;DR: This review provides a comprehensive overview of existing Mg-based composite preparation and their mechanical and corrosion properties and biological responses and future perspectives on the development of Mg -based composite biomaterials.
84
Grain boundary co-segregation in magnesium alloys with multiple substitutional elements
TL;DR: In this paper, a complex magnesium alloy Mg-3Al-1Zn-0.3Ca (wt.%) with multiple substitutional elements was subjected to a combination of deformation and annealing treatments in order to examine how a variation of bulk solute concentrations would influence its segregation and precipitation behavior.
73
Reducing the yield asymmetry in Mg-5Li-3Al-2Zn alloy by hot-extrusion and multi-pass rolling
Xiaoqiang Li,Ren Liang,Qichi Le,Lei Bao,Peipeng Jin,Ping Wang,Chunlong Cheng,Xiong Zhou,Chenglu Hu +8 more
TL;DR: In this article, Li et al. showed that the combined action of the weak basal lamellar texture, grain refinement and addition of Li element could effectively improve the yield symmetry.
51
The evolution of microstructure and texture of AZ80 Mg alloy cup-shaped pieces processed by rotating backward extrusion
TL;DR: In this paper, an effective plastic deformation technique, rotating backward extrusion (RBE), was proposed for producing high performance AZ80 magnesium alloy cup-shaped pieces. And the results shown that the equivalent strain and deformation uniformity of the cup pieces could be substantially increased by the RBE process compared with the conventional backward extrusions.
50
Effect of solution annealing on microstructures and corrosion behavior of wire and arc additive manufactured AZ91 magnesium alloy in sodium chloride solution
TL;DR: In this paper , the effect of solution annealing on microstructures and corrosion behavior of wire and arc additive manufactured (WAAM) AZ91 magnesium (Mg) alloy in 0.1 M NaCl was investigated by microstructure analysis and electrochemical measurements.
41
References
Texture Analysis with MTEX - Free and Open Source Software Toolbox
TL;DR: The MATLAB toolbox MTEX as discussed by the authors provides a unique way to represent, analyse and interpret crystallographic preferred orientation, i.e. texture based on integral (pole figure) or individual orientation (EBSD) measurements.
Dynamic and post-dynamic recrystallization under hot, cold and severe plastic deformation conditions
TL;DR: In this paper, the evolution of the new microstructures produced by two types of dynamic recrystallization is reviewed, including those brought about by severe plastic deformation (SPD).
2.3K
Recrystallization and grain growth
J.E. Burke,D. Turnbull +1 more
TL;DR: A wide overview of the state-of-the-art of recrystallization mechanisms in polycrystalline materials in various fields (geosciences, glaciology, metallurgy) can be found in this article.
1.5K
The texture and anisotropy of magnesium–zinc–rare earth alloy sheets
TL;DR: In this article, the rolling textures of six magnesium alloys containing different levels of zinc and rare earth (RE, e.g. mischmetal or Y) additions are examined. And the influence of texture on the mechanical response is investigated.
1K
Magnesium casting technology for structural applications
TL;DR: Magnesium casting technology was well developed during and after World War II, both in gravity sand and permanent mold casting as well as high-pressure die casting, for aerospace, defense and automotive applications as discussed by the authors.
810