Journal Article10.1179/IMR.1992.37.1.1
Rapid solidification processing with specific application to aluminium alloys
330
TL;DR: In this article, the fundamental scientific principles underlying RST are discussed and particular emphasis is given to published studies of composition-processing-microstruc... In this paper, we focus on the application of rapid solidification as a means of improving the behaviour of existing alloy systems and also developing novel alloying compositions.
read more
Abstract: The critical need for high strength, high performance, and cost effective materials has resulted in the use of novel processing techniques for the development of new aluminium alloys for structural applications. The highly attractive combinations of microstructure and mechanical properties achievable through rapid solidification technology (RST) have prompted the study and application of rapid solidification as a means of improving the behaviour of existing alloy systems and also developing novel alloying compositions. The rapid extraction of thermal energy associated with RST permits large deviations from equilibrium, as evidenced by the extension in solid solubility limits, sharp reductions in grain size, and a reduction in the size and number of segregated phases with concomitant development of non-equilibrium phases. In the present paper, the fundamental scientific principles underlying RST are discussed and particular emphasis is given to published studies of composition-processing-microstruc...
read more
Chat with Paper
AI Agents for this Paper
Find similar papers on Google Scholar, PubMed and Arxiv
Write a critical review of this paper
Analyze citations of this paper to find unaddressed research gaps
Citations
Parametric analysis of thermal behavior during selective laser melting additive manufacturing of aluminum alloy powder
Yali Li,Dongdong Gu +1 more
TL;DR: In this article, the effects of laser power and scan speed on the thermal behavior of selective laser melting (SLM) additive manufacturing of AlSi10Mg powder were investigated.
684
A review of Laser Powder Bed Fusion Additive Manufacturing of aluminium alloys: Microstructure and properties
TL;DR: A review of the current status of additive manufacturing with Al-alloys is presented in this paper, focusing on the microstructural characteristics and how these influence mechanical properties, and the remaining challenges in the development of AM with high-strength Al-aloys are discussed.
The rapid solidification processing of materials: science, principles, technology, advances, and applications
TL;DR: A comprehensive review of the widely accepted and used rapid solidification processes is presented in this article, where the intrinsic aspects and types of nucleation and the kinetics governing nucleations and subsequent growth of the crystal during rapid solidization are discussed.
299
Precipitation evolution in Al-Zr and Al-Zr-Ti alloys during isothermal aging at 375-425 °C
TL;DR: In this article, the authors investigated the effect of ternary alloying additions on the hardness of spheroidal Al 3 Zr and Al 3 (Zr 1− x Ti x ) (L1 2 ) precipitates within solute-enriched dendrites.
280
Thermal Behavior and Microstructure Evolution during Laser Deposition with Laser-Engineered Net Shaping: Part II. Experimental Investigation and Discussion
TL;DR: The thermal behavior during laser-engineered net shaping (LENS) processing was numerically simulated using the alternate direction explicit finite difference method in Part I of this work as discussed by the authors.
207
References
Metallic Phase with Long-Range Orientational Order and No Translational Symmetry
TL;DR: In this article, a metallic solid with long-range orientational order, but with icosahedral point group symmetry, which is inconsistent with lattice translations, was observed and its diffraction spots are as sharp as those of crystals but cannot be indexed to any Bravais lattice.
6.9K
Stability of a Planar Interface During Solidification of a Dilute Binary Alloy
W. W. Mullins,R. F. Sekerka +1 more
TL;DR: In this article, the stability of a moving planar liquid-solid interface during unidirectional freezing of a dilute binary alloy is theoretically investigated by calculating the time dependence of the amplitude of a sinusoidal perturbation of infinitesimal amplitude introduced into the planar shape.
3K
Non-crystalline Structure in Solidified Gold–Silicon Alloys
TL;DR: This article showed that amorphous configurations have been retained in the solid state by cooling from the melt with sufficient celerity so as to prevent formation of the equilibrium crystalline structures in solid metals and alloys.
2.6K
•Book
Aluminum: Properties and Physical Metallurgy
John E. Hatch
- 01 Aug 1984
TL;DR: Aluminum as mentioned in this paper is a collection of 53 recognized experts on aluminium and aluminium alloys Joint venture by world renowned authorities-the Aluminium Association Inc. and American Society for Metals.
1.9K