PVT-NG Sensor Final Report
Dean James Mitchell,Charles A. Brusseau +1 more
- 01 Jan 2012
TL;DR: The polyvinyl toluene (PVT) neutron gamma gamma detector was developed by the Domestic Nuclear Detection Office (DNDO) for both gamma and neutron detection as mentioned in this paper.
read more
Abstract: This document is a final report for the polyvinyl toluene (PVT) neutron-gamma (PVT-NG) project, which was sponsored by the Domestic Nuclear Detection Office (DNDO). The PVT-NG sensor uses PVT detectors for both gamma and neutron detection. The sensor exhibits excellent spectral resolution and gain stabilization, which are features that are beneficial for detection of both gamma-ray and neutron sources. In fact, the ability to perform isotope identification based on spectra that were measured by the PVT-NG sensor was demonstrated. As described in a previous report, the neutron sensitivity of the first version of the prototype was about 25% less than the DNDO requirement of 2.5 cps/ng for bare Cf-252. This document describes design modifications that were expected to improve the neutron sensitivity by about 50% relative to the PVT-NG prototype. However, the project was terminated before execution of the design modifications after portal vendors demonstrated other technologies that enable neutron detection without the use of He-3. Nevertheless, the PVT-NG sensor development demonstrated several performance goals that may be useful in future portal designs.
read more
Chat with Paper
AI Agents for this Paper
Find similar papers on Google Scholar, PubMed and Arxiv
Write a critical review of this paper
Analyze citations of this paper to find unaddressed research gaps
Figures

Figure 5. Design plan of the Version 2 of the PVT-NG sensor. 
Figure 4. The spectrum recorded by a 2×4×16 NaI detector while it was exposed to a 252 Cf source. The three spectra represent neutron-to-gamma conversion produced by sheets of the following materials, which were placed in front of the detector: PVC (black); 
Figure 1. Cross-sectional view of the PVT-NG detector. The front of the detector is at the top of this drawing. 
Figure 2. Front view of the PVT-NG detector 
Figure 6. Design detail at the base of the PVT-NG sensor 
Figure 3. Relative increase in the neutron capture rate versus thickness of polyethylene placed behind the NEMA enclosure.
Citations
An integrated system for non-destructive detection of shielded nuclear material using multiple modes of passive detection
TL;DR: In this paper , an experimental assessment is made of the performance of an integrated system for the detection of shielded nuclear material that features muon tomography and polyvinyl toluene bi-panel detector systems.
References
Neutron Counting and Gamma Spectroscopy with PVT Detectors
Dean James Mitchell,Charles A. Brusseau +1 more
- 01 Jun 2011
TL;DR: In this article, the authors describe the design and characterization data for a detection system called PVT-NG, which uses large polyvinyl toluene (PVT) detectors to monitor both types of radiation.