Process for preparing a polysiloxane

TL;DR: In this article, a binder system is provided for the preparation of lignocellulosic composite molded articles, such as flake or particle board, which incorporates an internal release agent and comprises an emulsifiable organic di-or polyisocyanate and a carboxy functional siloxane.

TL;DR: A silicone rubber composition with a good shelf life and fast curing at elevated temperatures comprising a silanol end-stopped diorganopolysiloxane polymer, a silicone hydride and a rhodium complex catalyst in combination with an inhibitor compound selected from low molecular weight silanol polysiloxanes, acetylenic compounds, olefinic carboxylic acid esters of aliphatic alcohols, alkenyl isocyanurates and mixtures of the above inhibitor compounds are especially suited as release coatings for plastic and cellulosic sub

TL;DR: In this paper, a method of producing a latex of crosslinked polydiorganosiloxane is described, which yields an elastomer upon removal of the water.

TL;DR: In this article, the authors describe a class of polyopolysiloxanes with a pour point below -15°C, which are miscible with mineral oil and synthetic lubricating oils.

TL;DR: In this paper, sheet materials are rendered non-adherent to various organic solids by treating with an aqueous emulsion containing (i) a vinyl chain-stopped polyorganosiloxane, (ii) an organohydrogen polysiloxane and (iii) a platinum catalyst.

TL;DR: In this article, an EMULSION PREPARED by DISSOLVING a SURFACE ACTIVE SULFONIC ACID in WATER, ADDING POLYDIORGANOSILOXANE, HOMOGENIZING the MIXTURE, HEATING to POLYMERIZE the SILOCANE, NEUTRALIZING, ADDing CARBON BLACK, and thereafter adding an ORGANOMETALLIC CATALyst and an ALKOXYSILANE, PROVIDES a HEAT STable ELECT

TL;DR: In this article, the UNIT FORMULA (R)A-SI-O((4-A)/2) was used to represent the ORGANOSILOXANE this article.