Journal Article10.1021/CR3001862
Polyanionic (phosphates, silicates, sulfates) frameworks as electrode materials for rechargeable Li (or Na) batteries.
1K
TL;DR: For more than 20 years, most of the technological achievements for the realization of positive electrodes for practical rechargeable Li battery systems have been devoted to transition metal oxides such as LixMO2 (M = Co, Ni, Mn), LixMn2O4, LixV2O5, or LIXV3O8.
read more
Abstract: For more than 20 years, most of the technological achievements for the realization of positive electrodes for practical rechargeable Li battery systems have been devoted to transition metal oxides such as LixMO2 (M = Co, Ni, Mn), LixMn2O4, LixV2O5, or LixV3O8. The first two classes of materials built on close-packed oxygen stacking adopt bidimensional and tridimensional crystal structures, respectively (Figure 1), from which lithium ions may be easily intercalated or extracted in a reversible manner. These oxides are reasonably good ionic and electronic conductors, and lithium insertion/extraction proceeds while operating on the M4+/M3+ redox couple, located between 4 and 5 V versus Li+/Li...
read more
Chat with Paper
AI Agents for this Paper
Find similar papers on Google Scholar, PubMed and Arxiv
Write a critical review of this paper
Analyze citations of this paper to find unaddressed research gaps
Citations
Li-ion battery materials: present and future
TL;DR: In this article, a review of the key technological developments and scientific challenges for a broad range of Li-ion battery electrodes is presented, and the potential/capacity plots are used to compare many families of suitable materials.
6.5K
A reflection on lithium-ion battery cathode chemistry
TL;DR: Professor Arumugam Manthiram looks back at the evolution of cathode chemistry, discussing the three major categories of oxide cathode materials with an emphasis on the fundamental solid-state chemistry that has enabled these advances.
Active Materials for Aqueous Zinc Ion Batteries: Synthesis, Crystal Structure, Morphology, and Electrochemistry
TL;DR: The current advances, existing limitations, along with the possible solutions in the pursuit of cathode materials with high voltage, fast kinetics, and long cycling stability are comprehensively covered and evaluated to guide the future design of aqueous ZIBs with a combination of high gravimetric energy density, good reversibility, and a long cycle life.
1.3K
Nickel-Rich Layered Cathode Materials for Automotive Lithium-Ion Batteries: Achievements and Perspectives
Seung-Taek Myung,Filippo Maglia,Kang Joon Park,Chong Seung Yoon,Peter Lamp,Kim Sung-Jin,Yang-Kook Sun +6 more
TL;DR: In this paper, the potential and limitations of nickel-rich cathode materials are compared with reference to realistic target values from the automotive industry, and how future automotive targets can be achieved through fine control of the structural and microstructural properties.
1.1K
References
Issues and challenges facing rechargeable lithium batteries
TL;DR: A brief historical review of the development of lithium-based rechargeable batteries is presented, ongoing research strategies are highlighted, and the challenges that remain regarding the synthesis, characterization, electrochemical performance and safety of these systems are discussed.
19.9K
Electrical Energy Storage for the Grid: A Battery of Choices
TL;DR: The battery systems reviewed here include sodium-sulfur batteries that are commercially available for grid applications, redox-flow batteries that offer low cost, and lithium-ion batteries whose development for commercial electronics and electric vehicles is being applied to grid storage.
13.4K
Challenges for Rechargeable Li Batteries
John B. Goodenough,Youngsik Kim +1 more
TL;DR: In this paper, the authors reviewed the challenges for further development of Li rechargeable batteries for electric vehicles and proposed a nonflammable electrolyte with either a larger window between its lowest unoccupied molecular orbital and highest occupied molecular orbital (HOMO) or a constituent that can develop rapidly a solid/ electrolyte-interface (SEI) layer to prevent plating of Li on a carbon anode during a fast charge of the battery.
9.9K
Phospho‐olivines as Positive‐Electrode Materials for Rechargeable Lithium Batteries
TL;DR: In this article, the authors showed that a reversible loss in capacity with increasing current density appears to be associated with a diffusion-limited transfer of lithium across the two-phase interface.
7.6K
Lithium Batteries and Cathode Materials
TL;DR: This paper will describe lithium batteries in more detail, building an overall foundation for the papers that follow which describe specific components in some depth and usually with an emphasis on the materials behavior.
6K