Optimization of dental CBCT exposures through mAs reduction.
Ruben Pauwels,Lieke Seynaeve,J C G Henriques,C. de Oliveira-Santos,Paulo Henrique Couto Souza,Fernando Henrique Westphalen,Izabel Regina Fischer Rubira-Bullen,Rejane Faria Ribeiro-Rotta,Maria Ivete Bolzan Rockenbach,Francisco Haiter-Neto,Pisha Pittayapat,Hilde Bosmans,Ria Bogaerts,Reinhilde Jacobs +13 more
TL;DR: Although noise increased at a lower mAs, clinical image quality often remained acceptable at exposure levels below the manufacturer's recommended setting, for certain patient groups.
read more
Abstract: Objectives: To investigate the effect of tube current–exposure time (mAs) reduction on clinical and technical image quality for different CBCT scanners, and to determine preliminary minimally acceptable values for the mAs and contrast-to-noise ratio (CNR) in CBCT. Methods: A polymethyl methacrylate (PMMA) phantom and an anthropomorphic skull phantom, containing a human skeleton embedded in polyurethane, were scanned using four CBCT devices, including seven exposure protocols. For all protocols, the mAs was varied within the selectable range. Using the PMMA phantom, the CNRAIR was measured and corrected for voxel size. Eight axial slices and one coronal slice showing various anatomical landmarks were selected for each CBCT scan of the skull phantom. The slices were presented to six dentomaxillofacial radiologists, providing scores for various anatomical and diagnostic parameters. Results: A hyperbolic relationship was seen between CNRAIR and mAs. Similarly, a gradual reduction in clinical image quality was seen at lower mAs values; however, for several protocols, image quality remained acceptable for a moderate or large mAs reduction compared with the standard exposure setting, depending on the clinical application. The relationship between mAs, CNRAIR and observer scores was different for each CBCT device. Minimally acceptable values for mAs were between 9 and 70, depending on the criterion and clinical application. Conclusions: Although noise increased at a lower mAs, clinical image quality often remained acceptable at exposure levels below the manufacturer’s recommended setting, for certain patient groups. Currently, it is not possible to determine minimally acceptable values for image quality that are applicable to multiple CBCT models. Dentomaxillofacial Radiology (2015) 44, 20150108. doi: 10.1259/dmfr.20150108 Cite this article as: Pauwels R, Seynaeve L, Henriques JCG, de Oliveira-Santos C, Souza PC, Westphalen FH, et al. Optimization of dental CBCT exposures through mAs reduction. Dentomaxillofac Radiol 2015; 44: 20150108.
read more
Chat with Paper
AI Agents for this Paper
Find similar papers on Google Scholar, PubMed and Arxiv
Write a critical review of this paper
Analyze citations of this paper to find unaddressed research gaps
Citations
Quantitative evaluation of metal artifacts using different CBCT devices, high-density materials and field of views.
Marina Codari,Karla de Faria Vasconcelos,Laura Ferreira Pinheiro Nicolielo,Francisco Haiter Neto,Reinhilde Jacobs +4 more
TL;DR: The authors' in-vitro study showed that different CBCT devices, high-density materials and FOV should be considered while evaluating CBCT images and more carefully, diagnosis conclusions should be drawn in images containing amalgam and copper-aluminum alloy.
Halve the dose while maintaining image quality in paediatric Cone Beam CT
Anne Caroline Costa Oenning,Ruben Pauwels,Ruben Pauwels,Ruben Pauwels,Andreas Stratis,Karla de Faria Vasconcelos,Elisabeth Tijskens,Annelore De Grauwe,Reinhilde Jacobs,Reinhilde Jacobs,Benjamin Salmon +10 more
TL;DR: A significant decrease in the effective dose can be achieved while maintaining the image quality required for paediatric CBCT, as shown in the results of this work.
Radiation protection in dental radiology - Recent advances and future directions.
TL;DR: Dental radiology uses X-ray technology to diagnose and design treatment of various clinical problems related to the oral cavity and surrounding tissues and update is needed to account for newer technologies such as cone beam computed tomography (CBCT) and digital imaging.
63
An analysis of effective dose optimization and its impact on image quality and diagnostic efficacy relating to dental cone beam computed tomography (CBCT)
Margarete B McGuigan,Henry F. Duncan,Keith Horner +2 more
- 16 Apr 2018
TL;DR: It is evident that there is limited practical advice available to dentists regarding dose optimization and any existing protocols may not be readily transferable to every CBCT machine, the manufacturers' role is not often conducive to dose limitation and the bulk of evidence is at lower levels of evidence.
49
Dose optimization by altering the operating potential and tube current exposure time product in dental cone beam CT: a systematic review
TL;DR: For many CBCT machines, it should be possible to optimize one, or more, of the investigated exposure parameters and therefore reduce patient radiation dose, while maintaining diagnostic image quality for some diagnostic tasks, however, more rigorous research is still required.
References
Imaging of root canal fillings: a comparison of subjective image quality between limited cone-beam CT, storage phosphor and film radiography
TL;DR: Image quality of storage phosphor images was subjectively as good as conventional film images and superior to LCBCT images for the evaluation of both homogeneity and length of root fillings in single-rooted teeth.
112
Cone beam CT image artefacts related to head motion simulated by a robot skull: visual characteristics and impact on image quality
TL;DR: Assessment of image quality after head motion simulated by a robot skull found that head motion of any type resulted in artefacts in CBCT images, and the impact on IQ depended on the region and level in the skull.
75
Development and applicability of a quality control phantom for dental cone-beam CT.
Ruben Pauwels,Harry Stamatakis,Giorgos Manousaridis,Adrian Walker,Koen Michielsen,Hilde Bosmans,Ria Bogaerts,Reinhilde Jacobs,Keith Horner,Kostas Tsiklakis +9 more
TL;DR: In this paper, a polymethyl methacrylate (PMMA) cylindrical phantom with inserts for image quality analysis was developed for CBCT imaging modality for various dentomaxillofacial applications.
74
Estimating cancer risk from dental cone-beam CT exposures based on skin dosimetry
Ruben Pauwels,Lesley Cockmartin,Deimante Ivanauskaité,Ausra Urbonienė,Sophia Gavala,Catherine Donta,Kostas Tsiklakis,Reinhilde Jacobs,Hilde Bosmans,Ria Bogaerts,Keith Horner +10 more
TL;DR: The estimated radiation risk was primarily influenced by the age at exposure and the gender, pointing out the continuing need for justification and optimization of CBCT exposures, with a specific focus on children.
68
Modulation transfer function evaluation of cone beam computed tomography for dental use with the oversampling method
TL;DR: The oversampling method provided smooth and reproducible MTF curves and clarified that the 3D Accuitomo had high spatial resolution, especially in the z-axis direction, which was significantly higher than that in the axial direction.