Multilayer plastic substrates

TL;DR: In this article, a flexible light emitting device which has a light emitting element formed on a plastic substrate is presented, which is capable of suppressing deterioration by diffusion of impurities such as moisture, oxygen, alkaline metal and alkaline earth metal.

TL;DR: By doping an organic compound functioning as an electron donor (hereinafter referred to as donor molecules) into an organics layer contacting a cathode, donor levels can be formed between respective LUMO (lowest unoccupied molecular orbital) levels between the cathode and the organic compound layer, and therefore electrons can be injected from the cathodes, and transmission of the injected electrons can also be performed with good efficiency as discussed by the authors.

TL;DR: A flexible barrier assembly having a flexible visible light-transmissive substrate having a Tg greater than or equal to that of heat-stabilized polyethylene terephthalate (HSPET) overcoated with a first polymer layer having Tg higher than or lower than that of HSPET and further overlapped with at least two visible light transmissive inorganic barrier layers separated by at least one second polymer layer with Tg equal to or greater than the Tg of the first layer as discussed by the authors.

TL;DR: In this article, an organic light emitting device can include first and second metal layers used as electrodes on a substrate, an electron transport layer on the first metal layer, a first partition wall insulating the first layer from the second layer and extending onto the electron transport along the first sheet along with a protecting layer covering the hole transport layer.

TL;DR: In this article, the authors discuss the formation of Inorganic Films by Remote Plasma-Enhanced Chemical-Vapor Deposition (PLVD) and its application in solvent-gel coatings.

TL;DR: In this article, an organic electroluminescence element comprising an anode layer, a cathode layer and an organic luminescence layer there between, the organic luminecence layer having a carbazole derivative with a glass transition temperature of 110° C. or higher, and a phosphorescent dopant.

TL;DR: In this paper, the authors present an environmental barrier for an OLED, which consists of a foundation and a cover, each of which has a top of three layers of a first polymer layer, a second ceramic layer, and a third polymer layer.

TL;DR: In this paper, an organic light emitting device (OLED) is described for which the hole transporting layer, the electron transporting layer and/or the emissive layer, if separately present, is comprised of a non-polymeric material.