Open Access
Materials and process selection
Michael F. Ashby,CA Abel,K.L. Edwards +2 more
- 17 Aug 1993
3
About: The article was published on 17 Aug 1993. and is currently open access.
read more
Chat with Paper
AI Agents for this Paper
Find similar papers on Google Scholar, PubMed and Arxiv
Write a critical review of this paper
Analyze citations of this paper to find unaddressed research gaps
Citations
Sandwich Materials Selection Charts
Jochen Pflug,Ignaas Verpoest +1 more
TL;DR: In this paper, the authors present an approach to facilitate comparison and optimization of sandwich material combinations by comparing and optimizing equivalent homogenized sandwich material properties (bending stiffness, density, and c...
33
Wear Mode Map Evaluation of Induction Hardened 4140 and Carburised 8617H Steels on 1040 Steel
Alain Kusmoko,Alan Crosky +1 more
TL;DR: In this article, a study was conducted to evaluate the wear rate of changing the pinion material in a rack and pinion steering box from carburised SAE-AISI grade 8617 H steel to induction hardened 4140 steel.
•Dissertation
Drillstring Dynamics - Comparative analysis between a lumped element model s ability to recreate axial vibrations observed from measurements of dynamic strain using small-scale drillstring model
Thomas Løklingholm
- 01 Jan 2016
TL;DR: In this paper, a small-scale physical model of a drillstring was used for validating the axial vibrations simulated by the analytical model, where the vibrations where indicated by dynamic strain measurements.
2
References
Sandwich Materials Selection Charts
Jochen Pflug,Ignaas Verpoest +1 more
TL;DR: In this paper, the authors present an approach to facilitate comparison and optimization of sandwich material combinations by comparing and optimizing equivalent homogenized sandwich material properties (bending stiffness, density, and c...
33
Wear Mode Map Evaluation of Induction Hardened 4140 and Carburised 8617H Steels on 1040 Steel
Alain Kusmoko,Alan Crosky +1 more
TL;DR: In this article, a study was conducted to evaluate the wear rate of changing the pinion material in a rack and pinion steering box from carburised SAE-AISI grade 8617 H steel to induction hardened 4140 steel.
•Dissertation
Drillstring Dynamics - Comparative analysis between a lumped element model s ability to recreate axial vibrations observed from measurements of dynamic strain using small-scale drillstring model
Thomas Løklingholm
- 01 Jan 2016
TL;DR: In this paper, a small-scale physical model of a drillstring was used for validating the axial vibrations simulated by the analytical model, where the vibrations where indicated by dynamic strain measurements.
2