Lead Iodide Perovskite Sensitized All-Solid-State Submicron Thin Film Mesoscopic Solar Cell with Efficiency Exceeding 9%
Hui-Seon Kim,Chang-Ryul Lee,Jeong-Hyeok Im,Ki Beom Lee,Thomas Moehl,Arianna Marchioro,Soo-Jin Moon,Robin Humphry-Baker,Jun-Ho Yum,Jacques-E. Moser,Michael Grätzel,Nam-Gyu Park +11 more
TL;DR: The use of a solid hole conductor dramatically improved the device stability compared to (CH3NH3)PbI3 -sensitized liquid junction cells.
read more
Abstract: We report on solid-state mesoscopic heterojunction solar cells employing nanoparticles (NPs) of methyl ammonium lead iodide (CH3NH3)PbI3 as light harvesters. The perovskite NPs were produced by reaction of methylammonium iodide with PbI2 and deposited onto a submicron-thick mesoscopic TiO2 film, whose pores were infiltrated with the hole-conductor spiro-MeOTAD. Illumination with standard AM-1.5 sunlight generated large photocurrents (JSC) exceeding 17 mA/cm2, an open circuit photovoltage (VOC) of 0.888 V and a fill factor (FF) of 0.62 yielding a power conversion efficiency (PCE) of 9.7%, the highest reported to date for such cells. Femto second laser studies combined with photo-induced absorption measurements showed charge separation to proceed via hole injection from the excited (CH3NH3)PbI3 NPs into the spiro-MeOTAD followed by electron transfer to the mesoscopic TiO2 film. The use of a solid hole conductor dramatically improved the device stability compared to (CH3NH3)PbI3 -sensitized liquid junction cells.
read more
Chat with Paper
AI Agents for this Paper
Find similar papers on Google Scholar, PubMed and Arxiv
Write a critical review of this paper
Analyze citations of this paper to find unaddressed research gaps
Citations
Electron-hole diffusion lengths exceeding 1 micrometer in an organometal trihalide perovskite absorber.
Samuel D. Stranks,Giles E. Eperon,Giulia Grancini,Christopher Menelaou,Marcelo J. P. Alcocer,Tomas Leijtens,Laura M. Herz,Annamaria Petrozza,Henry J. Snaith +8 more
TL;DR: In this article, transient absorption and photoluminescence-quenching measurements were performed to determine the electron-hole diffusion lengths, diffusion constants, and lifetimes in mixed halide and triiodide perovskite absorbers.
Sequential deposition as a route to high-performance perovskite-sensitized solar cells
Julian Burschka,Norman Pellet,Norman Pellet,Soo-Jin Moon,Robin Humphry-Baker,Peng Gao,Mohammad Khaja Nazeeruddin,Michael Grätzel +7 more
TL;DR: A sequential deposition method for the formation of the perovskite pigment within the porous metal oxide film that greatly increases the reproducibility of their performance and allows the fabrication of solid-state mesoscopic solar cells with unprecedented power conversion efficiencies and high stability.
Efficient planar heterojunction perovskite solar cells by vapour deposition
TL;DR: It is shown that perovskite absorbers can function at the highest efficiencies in simplified device architectures, without the need for complex nanostructures.
7.8K
The emergence of perovskite solar cells
TL;DR: In this article, a review describes the rapid progress that has been made in hybrid organic-inorganic perovskite solar cells and their applications in the photovoltaic sector.
6.6K
Long-Range Balanced Electron- and Hole-Transport Lengths in Organic-Inorganic CH3NH3PbI3
Guichuan Xing,Nripan Mathews,Shuangyong Sun,Swee Sien Lim,Yeng Ming Lam,Michael Grätzel,Michael Grätzel,Subodh Mhaisalkar,Tze Chien Sum +8 more
TL;DR: Two studies show, using a variety of time-resolved absorption and emission spectroscopic techniques, that perovskite materials manifest relatively long diffusion paths for charge carriers energized by light absorption, highlighting effective carrier diffusion as a fruitful parameter for further optimization.
6.6K
References
Organometal Halide Perovskites as Visible-Light Sensitizers for Photovoltaic Cells
TL;DR: Two organolead halide perovskite nanocrystals were found to efficiently sensitize TiO(2) for visible-light conversion in photoelectrochemical cells, which exhibit strong band-gap absorptions as semiconductors.
20.5K
Solid-state dye-sensitized mesoporous TiO2 solar cells with high photon-to-electron conversion efficiencies
Udo Bach,D. Lupo,Pascal Comte,Jacques-E. Moser,F. Weissörtel,Josef Salbeck,H. Spreitzer,Michael Grätzel +7 more
TL;DR: A dye-sensitized heterojunction of TiO2 with the amorphous organic hole-transport material 2,2′,7,7′-tetrakis(N,N-di-p-methoxyphenyl-amine)9,9′-spirobifluorene (OMeTAD) was described in this article.
6.5% efficient perovskite quantum-dot-sensitized solar cell
TL;DR: Perovskite QD-sensitized 3.6 μm-thick TiO(2) film shows maximum external quantum efficiency (EQE) of 78.6% at 530 nm and solar-to-electrical conversion efficiency of 6.54% at AM 1.5G 1 sun intensity (100 mW cm(-2)), which is by far the highest efficiency among the reported inorganic quantum dot sensitizers.
3.1K
All-solid-state dye-sensitized solar cells with high efficiency
TL;DR: It is shown that the solution-processable p-type direct bandgap semiconductor CsSnI3 can be used for hole conduction in lieu of a liquid electrolyte and enhances visible light absorption on the red side of the spectrum to outperform the typical dye-sensitized solar cells in this spectral region.
1.7K
Characterization of nanostructured hybrid and organic solar cells by impedance spectroscopy.
TL;DR: Impedance spectroscopy is used to characterize nanostructured hybrid and organic solar cells, providing information about carrier distribution, materials properties, and recombination mechanisms.
1.1K