Journal Article10.1039/B819629J
Layered vanadium and molybdenum oxides: batteries and electrochromics
864
TL;DR: The layered oxides of vanadium and molybdenum have been studied for close to 40 years as possible cathode materials for lithium batteries or electrochromic systems as mentioned in this paper.
read more
Abstract: The layered oxides of vanadium and molybdenum have been studied for close to 40 years as possible cathode materials for lithium batteries or electrochromic systems. The highly distorted metal octahedra naturally lead to the formation of a wide range of layer structures, which can intercalate lithium levels exceeding 300 Ah/kg. They have found continuing success in medical devices, such as pacemakers, but many challenges remain in their application in long-lived rechargeable devices. Their high-energy storage capability remains an encouragement to researchers to resolve the stability concerns of vanadium dissolution and the tendency of lithium and vanadium to mix changing the crystal structure on cycling the lithium in and out. Nanomorphologies have enabled higher reactivities to be obtained for both vanadium and molybdenum oxides, and with the latter show promise for electrochromic displays.
read more
Chat with Paper
AI Agents for this Paper
Find similar papers on Google Scholar, PubMed and Arxiv
Write a critical review of this paper
Analyze citations of this paper to find unaddressed research gaps
Citations
Phonon anharmonicity and equation of state parameters of orthovanadate Mg3(VO4)2: Raman Spectroscopy and X-ray diffraction investigation
TL;DR: Isothermal compression effect on structure and vibrational properties of orthovanadate Mg3(VO4)2 using Raman spectroscopy and X-ray powder diffraction up to pressures 20.2 and 25.7 GPa respectively as mentioned in this paper .
6
Interface structure and composition of MoO3/GaAs(0 0 1).
TL;DR: This interpretation is corroborated by in situ and real-time stress measurements evidencing a two-stage growth process as well as by elemental interface analysis revealing coexistance of Ga, As, Mo, and oxygen in a intermediate layer of 3-4 nm.
6
Urchin-type hollow porous structured vanadium oxide nanorod for one-dimensional lithium ion battery cathodes
TL;DR: In this article, a cost effective, environmentally friendly, and easily scalable method to adjust pore volume in vanadium oxide (VO2 (B)) nanorods with urchin type hollow porous structure without micelles was reported.
6
Mechanochemically induced transformation of CoO(OH) into Co3O4 nanoparticles and their highly reversible Li storage characteristics
Jae-Wan Park,Cheol-Min Park +1 more
TL;DR: In this paper, a simple synthetic method for the mechanochemically induced transformation of cobalt oxyhydroxides (CoO(OH)) into cobalt oxide (Co3O4) nanoparticles is developed.
References
Issues and challenges facing rechargeable lithium batteries
TL;DR: A brief historical review of the development of lithium-based rechargeable batteries is presented, ongoing research strategies are highlighted, and the challenges that remain regarding the synthesis, characterization, electrochemical performance and safety of these systems are discussed.
19.9K
Nano-sized transition-metal oxides as negative-electrode materials for lithium-ion batteries
TL;DR: It is reported that electrodes made of nanoparticles of transition-metal oxides (MO), where M is Co, Ni, Cu or Fe, demonstrate electrochemical capacities of 700 mA h g-1, with 100% capacity retention for up to 100 cycles and high recharging rates.
7.9K
Lithium Batteries and Cathode Materials
TL;DR: This paper will describe lithium batteries in more detail, building an overall foundation for the papers that follow which describe specific components in some depth and usually with an emphasis on the materials behavior.
6K
•Book
Handbook of inorganic electrochromic materials
Claes-Göran Granqvist
- 01 Jan 1995
TL;DR: In this paper, a case study on tungsten oxide is presented, where the authors discuss the preparation, structure, and composition of sputter-deposited tungstern oxide films.
2.4K
High rate capabilities Fe3O4-based Cu nano-architectured electrodes for lithium-ion battery applications.
TL;DR: A two-step electrode design consisting of the electrochemically assisted template growth of Cu nanorods onto a current collector followed by electrochemical plating of Fe3O4 is used, which demonstrates a factor of six improvement in power density over planar electrodes while maintaining the same total discharge time.
2K