Journal Article10.1039/C2TC00159D
Laminated magnetic graphene with enhanced electromagnetic wave absorption properties
738
TL;DR: In this paper, the authors reported a facile solvothermal route to synthesize laminated magnetic graphene and showed that there have significant changes in the electromagnetic properties of magnetic graphene when compared with pure graphene.
read more
Abstract: Graphene is highly desirable as an electromagnetic wave absorber because of its high dielectric loss and low density. Nevertheless, pure graphene is found to be non-magnetic and contributes to microwave energy absorption mostly because of its dielectric loss, and the electromagnetic parameters of pure graphene, which are out of balance, result in a bad impedance matching characteristic. In this paper, we report a facile solvothermal route to synthesize laminated magnetic graphene. The results show that there have been significant changes in the electromagnetic properties of magnetic graphene when compared with pure graphene. Especially the dielectric Cole–Cole semicircle suggests that there are Debye relaxation processes in the laminated magnetic graphene, which prove beneficial to enhance the dielectric loss. We also proposed an electromagnetic complementary theory to explain how laminated magnetic graphene, with the combined advantages of graphene and magnetic particles, helps to improve the standard of impedance matching for electromagnetic wave absorbing materials. Besides, microwave absorption properties indicate that the reflection loss of the as-prepared composite is below −10 dB (90% absorption) at 10.4–13.2 GHz with a coating layer thickness of 2.0 mm. This further confirms that the nanoscale surface modification of magnetic particles on graphene makes graphene-based composites have a certain research value in electromagnetic wave absorption.
read more
Chat with Paper
AI Agents for this Paper
Find similar papers on Google Scholar, PubMed and Arxiv
Write a critical review of this paper
Analyze citations of this paper to find unaddressed research gaps
Citations
Facile preparation and enhanced microwave absorption properties of flake carbonyl iron/Fe 3 O 4 composite
TL;DR: In this paper, the phase structures, morphology, magnetic properties, frequency-dependent electromagnetic and microwave absorption properties of the composites were investigated, and the measurement results showed that lower permittivity as well as modest permeability was obtained by the FCI/Fe3O4 composites.
39
Electromagnetic wave absorption properties of nickel-containing polymer-derived SiCN ceramics
TL;DR: In this paper, a polymer-derived SiCN (Ni)-ceramics with different adding amounts of Ni nanopowders was used to obtain the best absorption properties with a maximum reflection loss (R L ) of − − 39 dB at 17.2 GHz.
39
Remarkable microwave absorption of GO-SiO2/Fe3O4 via an effective design and optimized composition
TL;DR: In this paper, the design, synthesis, and characterization of the graphene oxide (GO)-SiO2/Fe3O4 nanocomposite as well as its applications for microwave absorption were presented.
39
Fabrication, characterization and electromagnetic wave absorption properties of covalently modified reduced graphene oxide based on dinuclear cobalt complex
TL;DR: In this paper, a single-layer and gradient concentration triple-layered microwave-absorbing composites based on functionalized reduced graphene oxide (FRGO) have been reported for application in the X-band.
38
Synthesis of graphene@branching-like polypyrrole@CoFe2O4 composites and their excellent electromagnetic wave absorption properties
Panbo Liu,Ying Huang,Xiang Zhang +2 more
TL;DR: In this article, the ternary composites composed of graphene, branching-like polypyrrole and CoFe2O4 nanoparticles were synthesized to expand the scope of electromagnetic wave absorbers.
38
References
Preparation of graphitic acid
Abstract: The preparation of graphitic oxide by methods described in the literature is time consuming and hazardous. A rapid, relatively safe method has been developed for preparing graphitic oxide from graphite in what is essentially an anhydrous mixture of sulfuric acid, sodium nitrate and potassium permanganate.
27.5K
Raman Spectrum of Graphite
F. Tuinstra,J. L. Koenig +1 more
TL;DR: Raman spectra are reported from single crystals of graphite and other graphite materials as mentioned in this paper, and the Raman intensity of this band is inversely proportional to the crystallite size and is caused by a breakdown of the k-selection rule.
10.4K
Detection of individual gas molecules adsorbed on graphene
Fred Schedin,A. K. Geim,Sergey V. Morozov,Ernie W. Hill,Peter Blake,Mikhail I. Katsnelson,K. S. Novoselov +6 more
TL;DR: In this paper, it was shown that micrometre-size sensors made from graphene are capable of detecting individual events when a gas molecule attaches to or detaches from graphene's surface.
Shape-Controlled Synthesis of Gold and Silver Nanoparticles
Yugang Sun,Younan Xia +1 more
TL;DR: Monodisperse samples of silver nanocubes were synthesized in large quantities by reducing silver nitrate with ethylene glycol in the presence of poly(vinyl pyrrolidone) (PVP), characterized by a slightly truncated shape bounded by {100, {110}, and {111} facets.
6.4K
Detection of Individual Gas Molecules Absorbed on Graphene
TL;DR: In this paper, it was shown that micrometre-size sensors made from graphene are capable of detecting individual events when a gas molecule attaches to or detaches from graphenes surface.
5.5K