Journal Article10.1103/PHYSREVB.53.16027
Kinetic analysis of the soldering reaction between eutectic SnPb alloy and Cu accompanied by ripening.
H. K. Kim,King-Ning Tu +1 more
493
TL;DR: In this article, a kinetic analysis of the soldering reaction accompanied by the ripening reaction is given, and a reasonable agreement has been obtained between the calculated scallop-grain growth based on kinetic analysis and the experimentally measured values.
read more
Abstract: The wetting reaction of molten eutectic SnPb on Cu leads to Cu-Sn intermetallic compound formation, but not compounds of Cu-Pb since they do not exist. Cu-Sn compounds do not form layered structures between the solder and Cu, rather the ${\mathrm{Cu}}_{6}$${\mathrm{Sn}}_{5}$ phase has grown as scalloplike grains into the molten solder. The scalloplike grains grow larger but fewer with time, indicating that a ripening reaction has occurred among them. However, the ripening is not a constant volume process since it is accompanied by the soldering reaction. Between the scallop grains, there are molten solder channels extending nearly all the way to the Cu interface. In aging, these channels serve as fast diffusion and dissolution paths of Cu in the solder to feed the reaction. A kinetic analysis of the soldering reaction accompanied by the ripening reaction is given. In the analysis, the growth of the scalloplike grains is supplied by two fluxes: the flux of interfacial reaction and the flux of ripening. The latter was formulated by the Gibbs-Thomson equation. The former was obtained by measuring the rate of consumption of Cu in the reaction. The measurement was carried out by determining the change of the total volume of scalloplike grains (and in turn, the Cu content in the grains) as a function of time and temperature. A reasonable agreement has been obtained between the calculated scallop-grain growth based on kinetic analysis and the experimentally measured values. A discussion of the Cu consumption rate is given, since it is important for applications in electronic packaging technology. \textcopyright{} 1996 The American Physical Society.
read more
Chat with Paper
AI Agents for this Paper
Find similar papers on Google Scholar, PubMed and Arxiv
Write a critical review of this paper
Analyze citations of this paper to find unaddressed research gaps
Citations
Kinetics-Based Modeling of Bond-Metal Dissolution and IMC During Soldering
Mohammad Faizan,Guo-X. Wang +1 more
- 01 Jan 2006
TL;DR: In this article, a theoretical analysis of the kinetics involved in the formation of the scalloped intermetallic phase is presented, which can predict the substrate dissolution and IMC thickness as a function of soldering time.
1
Coarsening processes in the lead-free solder alloy AgCu: theoretical and experimental investigations
W.H. Muller,T. Bohme +1 more
- 07 Dec 2005
TL;DR: In this paper, an experimentally based overview on nucleation, spinodal decomposition, and subsequent phase growth as observed in (lead-free) microelectronic solder connections is presented.
1
Kinetics of thin film intermetallic compound formation in the Cu/SnxIn100-x system characterized using color change observations
TL;DR: In this article, a high-throughput technique is developed to investigate intermetallic compound (IMC) growth kinetics in Cu/Sn and Cu/snxIn100-x bilayer systems based on combinatorial deposition of solder thin films and observation of color changes.
1
Effect of Thermal Treatment on the Intermetallic Compounds Formed at Sn-9Zn-1.5Ag-xBi (x = 0 and 1) Lead-Free Solder/Cu Interface
TL;DR: The formation of Intermetallic compounds at the interface between an Sn-9Zn-1.5Ag-xBi solder alloy and a Cu substrate was investigated by an optical microscope (OM), an X-ray diffractometer (XRD) and a scanning electron microscope (SEM) with an energy dispersive spectrometer (EDS) as discussed by the authors.
1
Stress and Strain Level Evolution and Correlation to Void Migration in Solder Bumps after Various Thermo-mechanical Post Treatments
Keith Newman,Tae-Kyu Lee,Gek Joo Tan,Siew Kim Lim +3 more
- 01 Dec 2019
TL;DR: In this article, the authors focused on the evolution of the stress and strain levels per solder bump, and their levels of change during various post-conditioning, high temperature storage, and thermal cycling.
1
References
The kinetics of precipitation from supersaturated solid solutions
I.M. Lifshitz,V.V. Slyozov +1 more
TL;DR: In this paper, an analysis is made of the process whereby diffusion effects can cause the precipitation of grains of a second phase in a supersaturated solid solution, and the kinetics of this type of grain growth are examined in detail.
8.1K
Growth kinetics of planar binary diffusion couples: ’’Thin‐film case’’ versus ’’bulk cases’’
U. Gösele,King-Ning Tu +1 more
TL;DR: In this paper, it is proposed that interfacial reaction barriers in binary A/B diffusion couples lead to the absence of phases predicted by the equilibrium phase diagram, provided that the diffusion zones are sufficiently thin.
580
Kinetics of interfacial reaction in bimetallic CuSn thin films
King-Ning Tu,R. D. Thompson +1 more
TL;DR: In this paper, the formation of Cu6Su5 between Cu and Sn thin films at room temperature and of Cu3Sn between Cu6Sn5 and Cu at temperatures from 115° to 150°'C were measured by Rutherford backscattering spectroscopy and glancing-incidence X-ray diffraction.
470
•Book
Principles of electronic packaging
Donald P. Seraphim,Ronald Lasky,Che-Yu Li,Peter A. Engel +3 more
- 01 Jan 1989
362