Journal Article10.1179/026708300101507839
Iron-phosphorus-carbon system part 1 : Mechanical properties of low carbon iron-phosphorus alloys
50
TL;DR: In this paper, the results of a wider archeometallurgical investigation of early iron-phosphorus alloys are presented, showing that the work hardening exponent is only slightly decreased and some cold working can be achieved.
read more
Abstract: As part of a wider archeometallurgical investigation the present paper records the results of mechanical tests on iron–phosphorus alloys, which were important in early iron usage. Phosphorus increases the yield and ultimate tensile strengths with a corresponding reduction in ductilities as measured by elongation and reduction in area, to a point where brittle failure occurs. However, the work hardening exponent is only slightly decreased and some cold working, as in drawing, can be achieved. The presence of carbon complicates these effects.
read more
Chat with Paper
AI Agents for this Paper
Find similar papers on Google Scholar, PubMed and Arxiv
Write a critical review of this paper
Analyze citations of this paper to find unaddressed research gaps
Citations
Effect of Phosphorus Addition on Dry Sliding Behavior of Fe–P Alloys Prepared by Powder Metallurgy
TL;DR: In this article, a dry sliding adhesive wear test at a normal load of 19.6, 29.4, and 39.2 N, at a constant sliding speed of 2.2 m/s and for a sliding distance of 4000 m using a pin-on-disk wear testing machine was conducted.
3
Revealing the iron skeleton of Notre-Dame de Paris. Methodologies and issues of archaeological and analytical investigations following the blaze
Maxime l'Héritier,Aurélia Azéma,Delphine Syvilay,Delphine Neff,Ivan Guillot,Emmanuelle Delqué-Količ,Philippe Dillmann +6 more
TL;DR: In this paper , a series of previously unknown iron armatures from the Notre-Dame de Paris were systematically recorded, including several iron staples from the top of the eaves walls, lead crest reinforcements and a sample of the tie rods used in the choir.
3
Le phosphore dans les fers et aciers. Points de vue historiques et thermochimiques. Partie I. Propriétés des fers anciens et des aciers modernes contenant du phosphore
Jean Le Coze
- 01 Jan 2019
TL;DR: Les effets de la presence du phosphore dans les aciers modernes and dans the fers anciens sont passes en revue as mentioned in this paper, and le debut du 19e siecle pour trouver des remedes a cette maladie.
2
Plasma processing of Fe-P/rGO powder for making robust wear resistance and anticorrosion coating over mild steel
Debidutta Debasish,Shubhra Bajpai,Snigdha Gochhayat,Tapan K. Dash,Ankeet Rajan Pati,P. K. Patra,A. N. Bhagat,Sushil Kumar Singh,Tapan Kumar Rout +8 more
TL;DR: In this article , the authors reported the manufacturing of spray grade powder of Fe-P metal ingot by mechanical hammering, milling and sieving process and its blending with reduced graphene oxide (rGO) (2 and 4 vol%) were successfully coated over mild steel by the thermal plasma spray method.
2
Impact of cerium on microstructure of rust and corrosion resistance of Cu-Cr-Ni-V micro-alloyed steels in NaHSO3 acid accelerated test
Xiaofeng Zhang,Jianguo Zhi,Xiwen Song +2 more
- 15 May 2024
TL;DR: Cerium promotes the formation of α-FeOOH and Fe3O4 in the rust and reduces the corrosion rate of Cu-Cr-Ni-V micro-alloyed steels in NaHSO3 acid accelerated test.
1
References
Mechanical Behavior of Materials
Marc A. Meyers,Krishan Kumar Chawla +1 more
- 06 Nov 2008
TL;DR: A balanced mechanics-materials approach and coverage of the latest developments in biomaterials and electronic materials, the new edition of this popular text is the most thorough and modern book available for upper-level undergraduate courses on the mechanical behavior of materials as discussed by the authors.
Grain-boundary segregation of phosphorus in an iron-phosphorus alloy and the effect upon mechanical properties
M.C. Inman,H.R Tipler +1 more
TL;DR: A simple radioactive tracer technique provided clear evidence of the segregation of phosphorus at the grain boundaries of an alloy of iron and 0.09% phosphorus as discussed by the authors, showing that the concentration of phosphorus in the grain boundary region can be fifty times as great as the grain interior concentration.
71
Role of Carbon in Preventing the Intergranular Fracture in Iron-Phosphorus Alloys
TL;DR: In this article, the impact test of Fe-P-C alloys with up to 067wt% phosphorus showed intergranular fracture (IGF) by an impact test after quenching from 1073k.
63
The relationship between the strain-hardening exponent n and the microstructure of metals
Zhang Fan,Huang Mingzhi,Shi Deke +2 more
TL;DR: In this paper, the authors investigated the relationship between the strain-hardening exponent n and the microstructure of metals, and showed that the n value depends only on the interparticle spacing of cementite, which is related to the two parameters, the volume fraction f and the particle size d.
45
Iron–phosphorus–carbon system: Part 3 – Metallography of low carbon iron–phosphorus alloys
TL;DR: In this article, the ghostlines mark the boundaries in phosphorus content arising from the dual phase ferrite-austenite microstructure, which existed at elevated temperatures, and are consistent with those produced by the ferrite austenitic transformation.
37