Journal Article10.1016/J.JMATPROTEC.2008.11.003
Interfacial microstructure and strength of steel/aluminum alloy joints welded by resistance spot welding with cover plate
247
TL;DR: In this paper, the tensile shear strength of the A5052/SUS304 joint was investigated using transmission electron microscopy and the reaction layer formed at its interface was observed.
read more
About: This article is published in Journal of Materials Processing Technology. The article was published on 21 Apr 2009. The article focuses on the topics: Austenitic stainless steel & Welding.
read more
Chat with Paper
AI Agents for this Paper
Find similar papers on Google Scholar, PubMed and Arxiv
Write a critical review of this paper
Analyze citations of this paper to find unaddressed research gaps
Citations
Joining of dissimilar materials
TL;DR: Current and emerging joining technologies are reviewed according to the mechanisms of joint formation, i.e.; mechanical, chemical, thermal, or hybrid processes.
Microstructure and mechanical properties of dissimilar Al alloy/steel joints prepared by a flat spot friction stir welding technique
TL;DR: In this article, a flat spot friction stir welding (FSW) was used to weld the 6061-T6 Al alloy and mild steel plate with a thickness of 1 mm.
216
A review on resistance spot welding of aluminum alloys
Sunusi Marwana Manladan,Sunusi Marwana Manladan,Farazila Yusof,Singh Ramesh,M. Fadzil,Zhen Luo,Sansan Ao +6 more
TL;DR: In this article, a review on the resistance spot welding (RSW) of Al/Al alloys, Al alloys/steel, Al/Mg alloys and Al/Ti alloys with focus on structure, properties, and performance relationships is presented.
186
Ultrasonic spot welding of aluminium to steel for automotive applications—microstructure and optimisation
TL;DR: In this article, energy efficient methods for joining aluminium to steel have potential for major applications in the automobile industry, where 1 mm gauge 6111 aluminium and DC04 steel automotors are compared.
128
Application of laser in seam welding of dissimilar steel to aluminium joints for thick structural components
TL;DR: In this paper, a laser welding-brazing technique using a continuous wave (CW) fiber laser with 8000 W of maximum power was applied in conduction mode to join 2mm thick steel (XF350) to 6mm thick aluminium (AA5083-H22), in a lap joint configuration with steel on the top.
126
References
Kinetic interactions between solid iron and molten aluminium
TL;DR: In this article, the metallurgical bond between ferrous inserts and aluminium matrix in castings was studied by immersion tests. And the morphology evolution and growth kinetics of the intermetallic layers Fe2Al5 and FeAl3 were established as a function of time and temperature.
323
Interfacial reaction in steel–aluminum joints made by friction stir welding
TL;DR: The reaction layers of friction stir welded joints made from austenitic stainless steel and Al alloy consisted of mixed layers of elongated and ultra-fine grains and the intermetallic compound layer as discussed by the authors.
277
Microstructural analysis of interfacial reaction between molten aluminium and solid iron
TL;DR: In this article, the microstructure of solid iron and molten aluminium couple was examined at the interface, and the phases were identified as Fe 2 Al 5 and FeAl 3.
222
Metallurgy of continuous hot dip aluminizing
TL;DR: In spite of a strong commercial interest in hot dipped aluminised steel strip, research over the past 60 years has been somewhat piecemeal as mentioned in this paper, and a relatively small body of work exists on this material compared with the equivalent galvanised product but the lack of systematic study and development means that it is difficult to rationalise and appraise the existing literature.
219
Interfacial microstructure and strength of steel/aluminum alloy lap joint fabricated by magnetic pressure seam welding
TL;DR: In this article, the magnetic pressure seam welding method was used for lap joining of low carbon steel (SPCC)/A6111 aluminum alloy, in particular, an intermediate layer formed at the weld interface was precisely examined using TEM.
170