Journal Article10.1016/j.fusengdes.2023.113658
Interface characterization and intermetallic compounds formation mechanism of V-4Cr-4Ti/316SS laser welded joints
Shaoning Jiang,Fujie Zhou,Wenjun Liu,Shushuai Liu,Xiu Wang,Shoushuai Zhang,Ran Wei,Pengfei Zheng,Jiang Jiao Lin +8 more
TL;DR: In this article , the morphology, microstructure, and hardness of the welded joint between V-4Cr-4Ti and 316SS, were analyzed after laser welding with a Cu interlayer.
read more
About: This article is published in Fusion Engineering and Design. The article was published on 01 Aug 2023. The article focuses on the topics: Welding & Intermetallic.
read more
Chat with Paper
AI Agents for this Paper
Find similar papers on Google Scholar, PubMed and Arxiv
Write a critical review of this paper
Analyze citations of this paper to find unaddressed research gaps
References
An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments
Warren C. Oliver,George M. Pharr +1 more
TL;DR: In this paper, the authors used a Berkovich indenter to determine hardness and elastic modulus from indentation load-displacement data, and showed that the curve of the curve is not linear, even in the initial stages of the unloading process.
25.4K
Prediction of phase formation sequence and phase stability in binary metal-aluminum thin-film systems using the effective heat of formation rule
TL;DR: In this paper, the effective heat of formation rule is used to predict first phase formation in metal-aluminum thin-film systems and to predict subsequent phase sequence for thin metal films on thick aluminum or thin aluminum on thick metal substrates.
276
Rapid formation of the sigma phase in 304 stainless steel during friction stir welding
Seung Hwan C. Park,Yutaka S. Sato,Hiroyuki Kokawa,Kazutaka Okamoto,Satoshi Hirano,Masahisa Inagaki +5 more
TL;DR: In this article, a possibility was suggested that the sigma formation can be accelerated by the emergence of delta-ferrite at high temperature and the subsequent decomposition of the ferrite under the high strain and recrystallization induced by friction stirring.
273
A comparative study of pulsed Nd:YAG laser welding and TIG welding of thin Ti6Al4V titanium alloy plate
TL;DR: In this paper, the properties of the Ti6Al4V titanium alloy joints between pulsed Nd:YAG laser beam welding and traditional fusion welding were compared, and it can be concluded that pulsed nd:yAG laser welding is much more suitable for welding the thin titanium alloy plate than TIG welding.
233