Journal Article10.1016/J.JMST.2019.07.036
Influence of minor Ce additions on the microstructure and mechanical properties of Mg-1.0Sn-0.6Ca alloy
Yanfu Chai,Chao He,Bin Jiang,Bin Jiang,Jie Fu,Zhong-Tao Jiang,Qingshan Yang,Haoran Sheng,Guangsheng Huang,Dingfei Zhang,Fusheng Pan,Fusheng Pan +11 more
70
TL;DR: In this paper, the microstructure and mechanical properties of Mg-Sn-Ca-Ce alloys with different Ce contents (0.0, 0.5, 1.0) were studied at room temperature.
read more
About: This article is published in Journal of Materials Science & Technology. The article was published on 15 Jan 2020. The article focuses on the topics: Grain growth & Microstructure.
read more
Chat with Paper
AI Agents for this Paper
Find similar papers on Google Scholar, PubMed and Arxiv
Write a critical review of this paper
Analyze citations of this paper to find unaddressed research gaps
Citations
Research advances in magnesium and magnesium alloys worldwide in 2020
TL;DR: More than 3000 papers on magnesium and magnesium alloys were published and indexed in SCI in 2020 alone as discussed by the authors, with the emerging research hot spots mainly on functional magnesium materials, such as Mg ion batteries, hydrogen storage Mg materials, structural-functional materials and bio-magnesium materials.
697
Micro-arc oxidation of magnesium alloys: a review
Wenhui Yao,Liang Wu,Jingfeng Wang,Ning Jiang,Dingfei Zhang,Maria Serdechnova,T. Shulha,Carsten Blawert,Mikhail L. Zheludkevich,Fusheng Pan +9 more
TL;DR: In this paper , a review systematically discusses micro-arc oxidation (MAO) process and some typical models, which still need to be further developed to provide a better understanding and guide for future researchers.
143
Clarifying the roles of grain boundary and grain orientation on the corrosion and discharge processes of α-Mg based Mg-Li alloys for primary Mg-air batteries
Huabao Yang,Liang Wu,Bin Jiang,Bin Jiang,Wenjun Liu,Jiangfeng Song,Guangsheng Huang,Dingfei Zhang,Fusheng Pan,Fusheng Pan +9 more
TL;DR: In this article, the corrosion behavior at open circuit potential (OCP) and discharge properties under applied anodic currents of two α-Mg based Mg-Li alloys, i.e., LAZ131 and LAZ531, with different microstructural features for primary Mg air batteries are investigated.
113
Rare earth improves strength and creep resistance of additively manufactured Zn implants
Youwen Yang,Youwen Yang,Mingli Yang,Chongxian He,Fangwei Qi,Di Wang,Shuping Peng,Shuping Peng,Cijun Shuai,Cijun Shuai,Cijun Shuai +10 more
TL;DR: Wang et al. as mentioned in this paper used a laser additive manufacturing technique to alloy cerium (Ce) with biodegradable Zinc (Zn), which achieved a considerably improved ultimate tensile strength of 247.4 ± 7.2 MPa.
99
Effect of Nd addition on the microstructure and mechanical properties of extruded Mg-Gd-Zr alloy
Bin Lei,Bin Jiang,Huabao Yang,Zhihua Dong,Qinghang Wang,Ming Yuan,Guangsheng Huang,Jiangfeng Song,Dingfei Zhang,Fusheng Pan +9 more
TL;DR: In this article, the microstructure and mechanical properties of newly developed Mg-4Gd-0.5Zr-xNd (x = 0, 0.5, 1 and 1.5 ) extruded alloys are investigated systematically.
70
References
A self-consistent anisotropic approach for the simulation of plastic deformation and texture development of polycrystals : application to zirconium alloys
TL;DR: In this paper, a visco-plastic self-consistent (VPSC) anisotropic approach for modeling the plastic deformation of polycrystals, together with a thorough discussion of the assumptions involved and the range of application of such approach is presented.
2K
A self consistent approach of the large deformation polycrystal viscoplasticity
TL;DR: In this paper, a large deformation viscoplastic polycrystal theory is formulated and a self-consistent approach is developed, where each grain is assumed to be a single ellipsoidal inclusion in a homogeneous equivalent medium.
1K
Effect of rare earth additions on microstructure and texture development of magnesium alloy sheets
TL;DR: In this paper, a relationship is drawn between the weak textures and the appearance of deformation bands with compression and double twins during rolling and a grain growth restriction during annealing of the sheets.
698
Recent research and developments on wrought magnesium alloys
TL;DR: In this article, the effects of different alloying elements on the microstructure and mechanical properties are described considering their strengthening mechanisms, e.g. grain refinement, precipitation and texture hardening effect.
563
The relation between macroscopic and microscopic strain hardening in F.C.C. polycrystals
TL;DR: In this article, the validity of using an equivalence criterion to describe the plastic properties of polycrystals at large strains is addressed from the point of view of the microscopic properties of the constituent grains.
558