Journal Article10.1016/J.MATCHAR.2016.06.020
In-situ EBSD study of deformation behavior of retained austenite in a low-carbon quenching and partitioning steel via uniaxial tensile tests
51
TL;DR: In this article, the deformation behavior of retained austenite (RA) in a low-carbon quenching and partitioning (Q&P) steel was investigated through using in-situ electron back-scattered diffraction and uniaxial tensile tests.
read more
About: This article is published in Materials Characterization. The article was published on 01 Aug 2016. The article focuses on the topics: Martensite & Austenite.
read more
Chat with Paper
AI Agents for this Paper
Find similar papers on Google Scholar, PubMed and Arxiv
Write a critical review of this paper
Analyze citations of this paper to find unaddressed research gaps
Citations
Site-specific atomic-scale characterisation of retained austenite in a strip cast TRIP steel
Zhiping Xiong,Ahmed A. Saleh,Ross K. W. Marceau,Adam Taylor,Nicole Stanford,Andrii Kostryzhev,Elena V. Pereloma +6 more
TL;DR: In this paper, the carbon content of retained austenite (RA) with different neighboring phases is investigated by correlating electron backscattering diffraction, transmission electron microscopy and atom probe tomography.
65
Characterization and Control of the Compromise Between Tensile Properties and Fracture Toughness in a Quenched and Partitioned Steel
TL;DR: In this article, the authors investigated the tensile properties and fracture toughness of various quenched and partitioned microstructures and evaluated the fracture resistance using double-edge notched tension tests.
49
Effects of Cobalt on the structure and mechanical behavior of non-equal molar CoxFe50−xCr25Ni25 high entropy alloys
Wei Fang,Ruobin Chang,Xin Zhang,Puguang Ji,Xinghua Wang,Baoxi Liu,Jia Li,Xinbo He,Xuanhui Qu,Fuxing Yin +9 more
TL;DR: In this article, the effect of Co compositional variation on the structure and mechanical properties of single phase solid solutions was investigated by electron backscatter diffraction, and the results indicated that lattice parameter tends to decrease and yield strength are enhanced, with the increase of Co content.
48
Systematical analysis on the grain orientation evolution of pure nickel under plastic deformation by using in-situ EBSD
TL;DR: A combination of an in-situ tensile technique and electron backscattering diffraction (EBSD) was used to investigate the changes in microstructure and texture during plastic deformation of nickel with a high cubic texture as discussed by the authors.
42
Development of a new generation of quench and partitioning steels: Influence of processing parameters on texture, nanoindentation, and mechanical properties
E.A. Ariza-Echeverri,Mohammad Masoumi,Arthur Seiji Nishikawa,Arthur Seiji Nishikawa,D.H. Mesa,A.E. Marquez-Rossy,André Paulo Tschiptschin +6 more
TL;DR: In this article, a quenching and partitioning process including the hot stamping (HS) process was studied, using two stamping temperatures (750 Ã Ã and 800 Ã ).
39
References
Deformation twinning
J. W. Christian,S. Mahajan +1 more
TL;DR: Deformation twinning mechanisms and their effects on material behavior are reviewed. Twinning shears and modes are introduced and predicted using formal theories. The description of fully coherent, rational twin interfaces and various dislocation models is presented. The effects of deformation temperature, strain-rate, alloying, doping, prestrain, precipitates and second-phase dispersions on deformation twinning are discussed.
3K
Carbon partitioning into austenite after martensite transformation
TL;DR: In this paper, a model is developed to describe the endpoint of carbon partitioning between quenched martensite and retained austenite, in the absence of carbide formation.
1.5K
Introduction to texture analysis : macrotexture, microtexture and orientation mapping
Valerie Randle,Olaf Engler +1 more
- 07 Aug 2000
TL;DR: A Guide to the Book Descriptors of Orientation Crystal Structures and Crystal Symmetries Transformation between Coordinate Systems: The Rotation matrix The "Ideal Orientation" (Miller or Miller-Bravais Indices) Notation The Reference Sphere, Pole Figure, and Inverse Pole Figure The Euler Angles and Euler Space The angle/axis of Rotation and Cylindrical Angle/Axis of Rosters Space The Rodrigues Vector and Rodrigues Space Application of Diffraction to Texture Analysis Diffraction of Radiation and Bragg's
1.2K
Structure–properties relationship in TRIP steels containing carbide-free bainite
TL;DR: In this article, the authors review the current knowledge about the relationship between the micro-structure of cold rolled intercritically annealed low-alloy TRIP-aided sheet steels and their mechanical properties from a materials engineering point of view.
890
Quenching and partitioning martensite-a novel steel heat treatment
TL;DR: In this paper, a novel concept for the heat treatment of martensite, different to customary quenching and tempering, is described, which can be used to generate microstructures with martensites/austenite combinations giving attractive properties.
751