High-Performance Photodiode-Type Photodetectors Based on Polycrystalline Formamidinium Lead Iodide Perovskite Thin Films.
TL;DR: Low-voltage, high-overall-performance photodiode-type photodetectors in a sandwiched geometry based on polycrystalline α-FAPbI3 thin films synthesized by a one-step solution processing method and post-annealing treatment show great promise for future optoelectronic device applications.
read more
Abstract: Photodetectors based on three dimensional organic–inorganic lead halide perovskites have recently received significant attention. As a new type of light-harvesting materials, formamidinium lead iodide (FAPbI3) is known to possess excellent optoelectronic properties even exceeding those of methylammonium lead iodide (MAPbI3). To date, only a few photoconductor-type photodetectors based on FAPbI3 single crystals and polycrystalline thin films in a lateral structure have been reported. Here, we demonstrate low-voltage, high-overall-performance photodiode-type photodetectors in a sandwiched geometry based on polycrystalline α-FAPbI3 thin films synthesized by a one-step solution processing method and post-annealing treatment. The photodetectors exhibit a broadband response from the near-ultraviolet to the near-infrared (330–800 nm), achieving a high on/off current ratio of 8.6 × 104 and fast response times of 7.2/19.5 μs. The devices yield a photoresponsivity of 0.95 AW−1 and a high specific detectivity of 2.8 × 1012 Jones with an external quantum efficiency (EQE) approaching 182% at −1.0 V under 650 nm illumination. The photodiode-type photodetectors based on polycrystalline α-FAPbI3 thin films with superior performance consequently show great promise for future optoelectronic device applications.
read more
Chat with Paper
AI Agents for this Paper
Find similar papers on Google Scholar, PubMed and Arxiv
Write a critical review of this paper
Analyze citations of this paper to find unaddressed research gaps
Citations
Efficient photodiode-type photodetectors with perovskite thin films derived from an MAPbI3 single-crystal precursor
TL;DR: In this paper, a precursor solution comprising of a methylammonium lead iodide (MAPbI3) single-crystal is applied to enlarge the grain size of the perovskite photosensitive layer and improve the detectivity of the photodetectors.
22
Confined Growth of High-quality Single-Crystal MAPbBr3 by Inverse Temperature Crystallization for Photovoltaic Applications
Taehoon Kim,Young Ho Chu,Ji-Eun Lee,Seong Ho Cho,Seongheon Kim,Kijoon Bang,Hyunjoon Lee,Changhyun Lim,Yun Seog Lee +8 more
TL;DR: In this paper, a 40µm-thick single-crystalline MAPbBr3 perovskite is fabricated by inverse temperature crystallization (ITC) with a selective seed-transfer technique.
21
Local stress enhanced photocurrent of visible light photo-detection in Cs2AgBiBr6 single crystal
Tong Li,Tong Li,Jing Wang,Ziyan Gao,Peng Lv,Yuben Yang,Junsheng Wu,Jiawang Hong,Xueyun Wang,Yanwen Zhou +9 more
TL;DR: In this paper, the photoelectric performance of the Cs2AgBiBr6 single crystal as a photodetector both macro-and microscopically was investigated, and it was shown that the photogenerated carriers are effectively collected, as in the case of macroscopic electrodes.
20
Characterization of aluminum 8-hydroxyquinoline microbelts and microdots, and photodiode applications
TL;DR: In this paper, the electrical, optical, and photoresponse characteristics of aluminum 8-hydroxyquinoline (Alq3)/silicon heterojunctions were investigated using spin coating method on p-type Si.
20
References
Organometal Halide Perovskites as Visible-Light Sensitizers for Photovoltaic Cells
TL;DR: Two organolead halide perovskite nanocrystals were found to efficiently sensitize TiO(2) for visible-light conversion in photoelectrochemical cells, which exhibit strong band-gap absorptions as semiconductors.
20.5K
Compositional engineering of perovskite materials for high-performance solar cells
Nam Joong Jeon,Jun Hong Noh,Woon Seok Yang,Young Chan Kim,Seungchan Ryu,Jangwon Seo,Sang Il Seok +6 more
TL;DR: This work combines the promising—but relatively unstable formamidinium lead iodide with FAPbI3 with methylammonium lead bromide as the light-harvesting unit in a bilayer solar-cell architecture and improves the power conversion efficiency of the solar cell to more than 18 per cent under a standard illumination.
6.1K
Efficient luminescent solar cells based on tailored mixed-cation perovskites
Dongqin Bi,Wolfgang Tress,M. Ibrahim Dar,Peng Gao,Jingshan Luo,Clementine Renevier,Kurt Schenk,Antonio Abate,Fabrizio Giordano,Juan-Pablo Correa Baena,Jean-David Decoppet,Shaik M. Zakeeruddin,Mohammad Khaja Nazeeruddin,Michael Grätzel,Anders Hagfeldt +14 more
TL;DR: A new metal halide perovskite photovoltaic cell that exhibits both very high solar-to-electric power-conversion efficiency and intense electroluminescence is reported on.
1.8K
High-detectivity polymer photodetectors with spectral response from 300 nm to 1450 nm.
Xiong Gong,Minghong Tong,Yangjun Xia,Wanzhu Cai,Ji Sun Moon,Yong Cao,Gang Yu,Chan-Long Shieh,Boo Nilsson,Alan J. Heeger +9 more
TL;DR: This work demonstrates polymer photodetectors with broad spectral response fabricated by using a small-band-gap semiconducting polymer blended with a fullerene derivative that can exceed the response of an inorganic semiconductor detector at liquid helium temperature.
1.8K
Organic–inorganic hybrid lead halide perovskites for optoelectronic and electronic applications
Yixin Zhao,Kai Zhu +1 more
TL;DR: Recent progress on hybrid perovskites is reviewed including basic chemical and crystal structures, chemical synthesis of bulk/nanocrystals and thin films with their chemical and physical properties, device configurations, operation principles for various optoelectronic applications (with a focus on solar cells), and photophysics of charge-carrier dynamics.
1.4K