Open AccessBook
Fracture and Strength of Solids
P. Tong,Tong-Yi Zhang,Jang Kyo Kim +2 more
- 01 Jan 1998
962
About: The article was published on 01 Jan 1998. and is currently open access. The article focuses on the topics: Fracture (geology).
read more
Chat with Paper
AI Agents for this Paper
Find similar papers on Google Scholar, PubMed and Arxiv
Write a critical review of this paper
Analyze citations of this paper to find unaddressed research gaps
Citations
On the critical threshold for detonation
TL;DR: In this paper , the authors considered the stress threshold required to shock an explosive so that it runs to full detonation and showed that the response becomes independent of microstructure and that there is a transition in an energetic crystal's electronic state.
1
Theory of propagation of cracks
TL;DR: In this article, it was shown that the thermodynamic criterion for crack propagation is not a sufficient one and leads to unsatisfactory results in the general case, and the necessary and sufficient criterion that there must be a local stress sufficient to rupture the atomic bonds at the edge of the crack does lead to satisfactory results.
1
Application of micromechanical models for predicting fracture toughness of sulphide controlled Fe 510 steels
TL;DR: In this article, the effect of sulphur on cleavage fracture is discussed. And the Schmidtmann and Nierhoff proposal for modifying the cleavage stress criterion and introducing the effect on crack tip blunting is compared with the RKR-model and with experimentally determined K Ic -values for four different qualities of Fe 510 steels.
1
Bursting strength and toughness of wire reinforced composite tubes under uniaxial (hoop) stress
R. Priestner,R.C. Hurst +1 more
TL;DR: In this article, two thicknesses of wire, of 0.007 and 0.016 in. diameters, were used for bursting tubes containing radial notches of various lengths.
1
References
Die mechanischen Festigkeitseigenschaften und die Realstruktur der Kristalle
TL;DR: The Rißausbreitungstheorie as mentioned in this paper is a befriedigende Darstellung der mechanischen Festigkeitseigenschaften; insbesondere beseitigt eine kürzlich vom Verf. vorgenommene Erweiterung.
•Book
An Introduction to Metallic Corrosion
Ulick R. Evans
- 01 Jan 1963
TL;DR: The Corrosion and Oxidation of Metals, the first volume of which was published in 1960 with additional volumes in 1968 and 1976, remains unchanged and the basic theories hold.