Journal Article10.14744/thermal.0000820
Effect of steam addition on the combustion, performance and emissions characteristics of an HCCI diesel engine
TL;DR: The addition of steam in HCCI diesel engine improves brake thermal efficiency, reduces NO x emissions and significantly reduces CO and unburned hydrocarbon emissions.
read more
Abstract: Although homogeneous charge compression ignition (HCCI) diesel engines are the favored source of power with near zero oxides of nitrogen (NO x ) and particulate matter emissions owing to a higher degree of homogeneity and elimination of diffusion phase combustion, the main drawback is the uncontrolled start of combustion along with high CO and unburned hydrocarbon emissions. In the present work, experimental investigations were carried out on a single cylinder diesel engine operating in HCCI combustion mode using external air-fuel mixture preparation. The regulated percentage of steam is added inside the mixing chamber and the effects on the combustion, performance and emission characteristics were reported for various steam injection rates at different brake mean effective pressures. The results obtained show that the brake thermal efficiency was improved to 21.048% with the addition of 20% steam addition and the NO x emissions were also reduced significantly.The emissions of CO and unburned hydrocarbon were found 0.7% and 93 ppmrespectively at the steam addition rate of 20%, however a rapid increase was observed if the steam injection rate was increased further. Overall, the present work shows that by the addition of steam, the CO and unburned hydrocarbon emissions can be reduced significantly along with NO x emissions and also there is a greater potential to control the start of combustion. Cite this article as: Rather MA, Wani MM. Effect of steam addition on the combustion, performance and emissions characteristics of an HCCI diesel engine. J Ther Eng 2024;10(3):710−721.
read more
Chat with Paper
AI Agents for this Paper
Find similar papers on Google Scholar, PubMed and Arxiv
Write a critical review of this paper
Analyze citations of this paper to find unaddressed research gaps
References
•Book
Internal combustion engine fundamentals
John B. Heywood
- 01 Jan 1988
TL;DR: In this article, the authors describe real engine flow and combustion processes, as well as engine operating characteristics and their operation, including engine design and operating parameters, engine characteristics, and operating characteristics.
17.3K
•Book
Internal Combustion Engines: Applied Thermosciences
Colin R. Ferguson
- 01 Jan 1986
TL;DR: In this article, the authors present an introduction to internal combustion engines, including fuel, air, and combustion properties of gas cycle and internal combustion engine, as well as a curve fit coefficient for ideal gases and selected Fuels.
913
A computer program for calculating properties of equilibrium combustion products with some applications to i.c. engines
Cherian Olikara,Gary L. Borman +1 more
- 01 Feb 1975
TL;DR: In this article, a computer program which rapidly calculates the equilibrium mole fractions and the partial derivatives of the mole fractions with respect to temperature, pressure and equivalence ratio for the products of combustion of any hydrocarbon fuel and air is described.
357
Characterization of light duty Diesel engine pollutant emissions using water-emulsified fuel
TL;DR: In this article, the effect of wateroil emulsions on the engine performance and on the main pollutant emissions, NOx, total hydrocarbons (THC), soot, particulate matter (PM) and its composition, was studied.
270