Book Chapter10.1007/978-94-007-6064-6_16
Degradation, Stabilization, and Flammability of Polymer Blends
Zvonimir Matusinović,Charles A. Wilkie +1 more
- 01 Jan 2014
- pp 1395-1430
About: The article was published on 01 Jan 2014. The article focuses on the topics: Flammability & Polymer blend.
read more
Chat with Paper
AI Agents for this Paper
Find similar papers on Google Scholar, PubMed and Arxiv
Write a critical review of this paper
Analyze citations of this paper to find unaddressed research gaps
Citations
Degradation of polymer blends: A brief review
F. P. La Mantia,Marco Morreale,Luigi Botta,Maria Chiara Mistretta,Manuela Ceraulo,Roberto Scaffaro +5 more
TL;DR: In this article, the authors report the status of the research on degradation of polymer blends focusing on thermal, thermomechanical and photo-oxidative degradation, and present a review of the existing literature.
219
Buckypapers of Polyvinyl chloride/Poly(styrene-co-maleic anhydride) Blend Intercalated Graphene oxide- Carbon nanotube Nanobifiller: Physical Property Exploration
TL;DR: In this article, a buckypaper of polyvinyl chloride (PVC) and poly(styrene-co-maleic anhydride) (PSMA) intercalated with carbon nanotube (CNT) and graphene oxide-CNT nanobifiller was prepared using resin infiltration technique.
13
Graphene: A multifunctional additive for sustainability
Abdou K. Diallo,Emna Helal,Giovanna Gutierrez,Milad Madinehei,Éric David,Nicole R. Demarquette,Nima Moghimian +6 more
TL;DR: In this article , the effects of graphene addition on the rheology, thermal and mechanical properties of a prime high-density polyethylene (prime HDPE) with post-industrial recycled HDPE (recHDPE) blends were investigated.
12
References
The flammability of polyacrylonitrile and its copolymers IV. The flame retardant mechanism of ammonium polyphosphate
TL;DR: Ammonium polyphosphate is shown to be an effective flame retardant for homopolymeric and selected fibre-forming copolymers of acrylonitrile as mentioned in this paper.
57
Solution 13C NMR spectroscopy of polyamide homopolymers (nylons 6, 11, 12, 66, 69, 610 and 612) and several commercial copolymers
TL;DR: In this paper, the trans amide units in the spectra of polyamide homopolymers were identified as uniquely characteristic of each polyamide polymer and used to distinguish polyamides from each other as repeat units in copolymers.
56
Effect of poly(vinyl chloride)/chlorinated polyethylene blend composition on thermal stability
TL;DR: In this article, the effect of miscibility and composition of the PVC/CPE blends on the thermal stability of these blends was investigated, and it was shown that the addition of CPE improves thermal stability for all the investigated blends in the temperature range where α calc is greater than αexp.
53
Recent developments in degradation and stabilization
TL;DR: In this article, the degradation of polyvinyl chloride (PVC) is investigated and some recent results from literature and from the author's laboratory are discussed. But despite the enormous technical and economical importance of PVC, it still offers many open problems due to its rather low stability aaainst the influence of heat and light.
52
Effect of Ca/Zn stabiliser on thermal degradation of poly(vinyl chloride)/chlorinated polyethylene blends
TL;DR: In this paper, the influence of Ca/Zn stabiliser on the thermal degradation of polyvinyl chloride/ chlorinated polyethylene (PVC/CPE) blends of different compositions in inert atmosphere was investigated by means of dynamic thermogravimetry in the temperature range 50-600°C.
52