Journal Article10.1080/10408436.2021.1935713
Comprehensive review on carbon nanotubes embedded in different metal and polymer matrix: fabrications and applications
Fahad Saleem Ahmed Khan,Nabisab Mujawar Mubarak,Mohammad Khalid,Mohammad Mansoob Khan,Yie Hua Tan,Rashmi Walvekar,Ezzat Chan Abdullah,Rama Rao Karri,Muhammad Ekhlasur Rahman +8 more
61
TL;DR: In recent years, carbon nanotubes (CNTs) have achieved remarkable properties, such as high thermal and mechanical stabilities, good catalytic and adsorption capabilities as discussed by the authors.
read more
Abstract: Carbonaceous material, especially carbon nanotubes (CNTs), have incredible properties, such as high thermal and mechanical stabilities, good catalytic and adsorption capabilities. In recent years, ...
read more
Chat with Paper
AI Agents for this Paper
Find similar papers on Google Scholar, PubMed and Arxiv
Write a critical review of this paper
Analyze citations of this paper to find unaddressed research gaps
Citations
A comprehensive review on micropollutants removal using carbon nanotubes-based adsorbents and membranes
Fahad Saleem Ahmed Khan,Nabisab Mujawar Mubarak,Mohammad Khalid,Yie Hua Tan,Ezzat Chan Abdullah,Muhammad Ekhlasur Rahman,Rama Rao Karri +6 more
TL;DR: In this paper, the existence of emerging micropollutants and their deleterious effects on human and animal health are discussed in a review, which provides an in-depth understanding of the removal of microputants from carbon nanotubes and CNTs related composites/ membrane and allows future researchers to resolve the barriers related to their applications at an industrial scale.
90
Development of carbon-based copper sulfide nanocomposites for high energy supercapacitor applications: A comprehensive review
TL;DR: A comprehensive review of the recent development in carbon material with reliance on carbon-based copper sulfide nanocomposites and their high energy supercapacitor applications is presented in this article .
59
Microwave-assisted synthesis of carbon nanotubes for the removal of toxic cationic dyes from textile wastewater
Sundus Saeed Qureshi,Vaishali V. Shah,Sabzoi Nizamuddin,Nabisab Mujawar Mubarak,Rama Rao Karri,Mohammad Hadi Dehghani,S. Ramesh,Mohammad Khalid,Muhammad Ekhlasur Rahman +8 more
TL;DR: In this paper , the effect of removal parameters, such as pH of ion solution, initial concentration, and contact time, was optimized on the adsorption process through response surface methodology, and it was found that the optimized removal of crystal violet dye was 81% at an optimum pH value of 7.0 with 10 mg/L of an initial concentration and a contact time of 25 min.
Experimental and theoretical review on covalent coupling and elemental doping of carbon nanomaterials for environmental photocatalysis
Mahreen Arooj,Javad B. M. Parambath,Nisar Ali,Adnan Khan,Sumeet Malik,Muhammad Bilal,Ahmed A. Mohamed +6 more
TL;DR: In this article , a review analyzes experimental and theoretical approaches related to the functionalization of carbon nanomaterials by covalent coupling and elemental doping for environmental photocatalysis.
22
References
Tribotechnical Properties of Composite Material “Aluminum–Carbon Nanofibers” under Friction on Steels 12Kh1 and ShKh15
A. D. Breki,T. S. Kol’tsova,A. N. Skvortsova,Oleg V. Tolochko,S. E. Aleksandrov,A. G. Kolmakov,A. A. Lisenkov,A. E. Gvozdev,Yu. A. Fadin,D. A. Provotorov +9 more
TL;DR: In this article, the antifriction and wear-resistant properties of aluminum-carbon nanofiber composite materials fabricated using various hot pressing modes are studied under dry sliding friction on 12Kh1 and ShKh15 steels.
Polyaniline nanotube composites: A high-resolution printable conductor
TL;DR: In this article, the authors show that the high aspect ratio of single wall carbon nanotubes enables percolation into a conducting network at extremely low nanotube concentration, and demonstrate that these thin composite films are printable via laser ablation with high resolution while retaining appropriate conductivity.
Percolation-dominated conductivity in a conjugated-polymer-carbon-nanotube composite
Jonathan N. Coleman,Seamus A. Curran,Alan B. Dalton,A.P. Davey,B. McCarthy,Werner J. Blau,R.C. Barklie +6 more
TL;DR: In this article, a pseudoband gap of 1.5 −2.5 eV was found for conjugated polymers, a form of carbon nanotubes, with a pseudometal conductivity of approximately 10 5 S/m.
Nanocomposites of polypyrrole/graphene nanoplatelets/single walled carbon nanotubes for flexible solid-state symmetric supercapacitor
TL;DR: In this paper, a low-cost and easy preparation procedure has been employed for the fabrication of nanocomposites based on graphene nanoplatelets (GP), single-walled carbon nanotubes (SWNTs) and polypyrrole (PPy) [GP/ SWNTs/PPy] for the superior supercapacitor electrode materials by taking advantage of electrochemical double layer capacitance of carbonaceous moieties and pseduocapacitance of conducting polymer.
Role of powder treatment and carbon nanotube dispersion in the fracture toughening of plasma-sprayed aluminum oxide-carbon nanotube nanocomposite.
TL;DR: Two different methodologies of CNT addition have been adopted in the powder feedstock to assist CNT dispersion in the nano-Al2O3 matrix to improve fracture toughness of the nanocomposites.